-
2011 ANSA & mETA North American Open Meeting
User Conference, The Inn at St. John's, Plymouth, United States, September 21, 2011
BETA CAE Systems S.A. has the pleasure to invite you to the
2011 open meeting in USA, hosted by BETA CAE Systems USA,
Inc.
-
Practical Introduction to CFD
Online Event, September 20, 2011
This course offers the attendees the fundamental knowledge
for using CFD in real life engineering applications. Through
a simple and moderately technical approach, this course
describes the steps in the CFD process and provides benefits
and issues for using CFD analysis in understanding of
complicated flow phenomena and its use in the design
process. Best practices for reducing errors and
uncertainties in CFD analysis are also presented in the
course.
-
The 6th Symposium on Numerical Analysis of Fluid Flow and Heat Transfer
Conference, G-Hotels, Halkidiki, Greece, September 19, 2011
This meeting is a part of the International Conference of
Numerical Analysis and Applied Mathematics 2011. The
objective of the symposium is to bring together scientists
working on numerical and also experimental issues of fluid
dynamics and heat transfer.
-
1st ERCOFTAC Conference on Simulation of Multiphase Flows in Gasification and Combustion
Conference, Hilton Hotel, Dresden, Germany, September 18, 2011
This ERCOFTAC conference will bring together experts and
scientists in the field of advanced modeling and simulation
of multiphase flows in both combustion and gasification.
Multiphase can stand for any combination of gas, liquid and
solid matter. In addition to the continuously high interest
in combustion in multi-phase flows (e.g. in engines, gas
turbines or coal combustors for mobility and power
generation), gasification has recently gained significant
interest.
-
ERCOFTAC Conference on Simulation of Multiphase Flows in Gasification and Combustion - Program online
Conference, Hilton Hotel, Dresden, Germany, September 18, 2011
This ERCOFTAC conference will bring together experts and
scientists in the field of advanced modeling and simulation
of multiphase flows in both combustion and gasification.
Multiphase can stand for any combination of gas, liquid and
solid matter. In addition to the continuously high interest
in combustion in multi-phase flows (e.g. in engines, gas
turbines or coal combustors for mobility and power
generation), gasification has recently gained significant
interest.
-
Uncertainty Management and Quantification in Industrial Analysis and Design
Course, Crowne-Plaza Hampton Marina, Hampton, United States, September 15, 2011
Uncertainty quantification has become a critical feature of
a computational
methodologies which will be utilized within an engineering
design process.
The purpose of this two-day ERCOFTAC-organized short course
is to bring
some the most promising approaches and developments in this
field to the
attention of researchers and engineers.
-
Uncertainty Management and Quantification in Industrial Analysis and Design
Course, corwne plaza hotel, hampton-marina, United States, September 15, 2011
Course: NIA is proud to present this ERCOFTAC organized
course to the US uncertainty quantification community. A
previous version of the course was presented in Munich,
Germany on March 3-4, 2011. The course has been organized
by Dr. Charles Hirsch. The US delivery is coordinated by
Dr. Bernard Grossman of NIA.
-
2011 FLOW-3D World Users Conference
User Conference, La Fonda Hotel, Santa Fe, United States, September 15, 2011
The 2011 FLOW-3D World Users Conference will be held
Thursday, September 15 to Friday, September 16 at La Fonda
Hotel in Santa Fe, NM. FLOW-3D users and those interested in
learning more about the software are welcome to attend the
conference.
-
Webinar Discussion: Towards analysis led design
Online Event, September 13, 2011
This discussion is focused on where we are today on
predictive analytical capability on designing fluid systems,
and collaboration of 1D system, CFD and other CAE tools.
https://cseg.webex.com/cseg/onstage/g.php?d=666950993&t=a
-
13th European Turbulence Conference
Conference, University of Warsaw, Warsaw, Poland, September 12, 2011
European Turbulence Conference provides place where
scientists working on varius aspects of turbulence can
exchange their knowledge and experience.
-
Summer School 2011 on VMTK - Fluent - Paraview
Course, Via R. Sanzio, 4, Segrate (MI), Italy, September 12, 2011
The summer school is aimed to junior and senior engineers,
scientists and PhD or postdoctoral students in the area of
bio fluid mechanics.
This four days course, focused on the technical aspects of
this field of application and structured as an extended
hands-on tutorial, is intended to walk the attendants
through a complete analysis of a sample hemodynamic
application, providing technical insights on each phase of
the workflow.
-
Getting started with OpenFOAM 2.0 Webinar
Online Event, September 12, 2011
A two-session online training webinar for OpenFOAM 2.0
(beginner's course).
-
Webinar : Training on Introduction to OpenFOAM
Online Event, September 12, 2011
A web based training from 12th September to 16th september
to
introduce OpenFOAM with its existing capability and provide
hands on experience to practicing CFD engineers.
-
Getting started with OpenFOAM 2.0 Webinar
Online Event, September 12, 2011
The objective of the webinar is to introduce OpenFOAM® with
its existing capability and provide hands on experience to
practicing CFD engineers. The total duration of the webinar
is 4 hours which is divided into two hours sessions over two
days.Email support will be provided to all participants
for duration of two weeks where the participants can put
forward any queries relating to the content of the webinar.
-
Workshop on Advanced Measurement Techniques and Computational Methods for Premixed and Partially Premixed Combustion
Workshop, Cagliari, Italy, September 10, 2011
NUMECA International and the Technical University of
Darmstadt jointly organize an International Workshop on
Advanced Measurement Techniques and Computational Methods
for Premixed and Partially Premixed Combustion. The workshop
is organized in the framework of the Marie Curie COMBINA
project and is financially supported by the
European Commission (FP7). The Workshop is organized in
conjunction with the Seventh Mediterranean Combustion
Symposium (MCS-7).
-
Practical Introduction to CFD
Online Event, September 7, 2011
Free webinar from NAFEMS on Practical Applications of CFD
-
International Conference on Aerospace Sciences and Engineering
Conference, Institute of Space Technology 1, Islamabad Highway Near Islamab, Islamabad, Pakistan, September 7, 2011
The Second International Conference on Aerospace Science &
Engineering (ICASE-2011) will be held in Islamabad from 07 -
09 September 2011. This is a biennial event which provides
an International platform to the scientists and engineers to
remain abreast with developments in aerospace, space
communication, design of space systems etc. The objective of
this conference is also to establish dialogues leading to
long lasting cooperation among the scientists and engineers
of the world.
-
CFD Modeling & Fluid Structure Interaction Workshop
Workshop, COMSOL BV, Zoetermeer, Netherlands, September 6, 2011
Reduce the need for costly experiments and turn to
simulation with the assistance of true multiphysics
technology. Join the workshop to find out how to analyze and
solve problems that involve fluid flows by using COMSOL
Multiphysics.
-
Multidisciplinary Optimisation Training Course
Course, International Digital Laboratory, University of Warwick, Coventry, United Kingdom, September 6, 2011
Gain fundamental optimisation theory and techniques on this
2 day Multidisciplinary Optimisation Training Course, held
in association with Cranfield University. Speakers include
Optimisation specialists; Ashutosh Tiwari, Jorn Mehnen and
Windo Hutabarat from Cranfield Univesity.
-
Engine Intake Aerotherman Design: Subsonic to High Speed Application
Course, Chaussee de Waterloo, 72, 1640 Rhode-Saint-Genese, Belgium, September 5, 2011
Aircraft engine intakes are critical components that ensure
the proper performance of the engine compression unit.
-
High Performance Computing Autumn Academy
Course, Centre for Mathematical Sciences, Cambridge, United Kingdom, September 5, 2011
The Autumn Academy is targeted at people just starting a
PhD, though it is highly suitable for more mature
researchers from academia or industry. The Academy will take
attendees through Basic HPC
tools, Programming, Performance Programming, Parallel
Architectures, Shared Variables Parallelism, Message Passing
Parallelism and Practical Parallel Programming.
-
SIMBIO 2011, Simulation and Modeling of Biological Flows
Conference, Vrije Universiteit Brussel (VUB), Brussels, Belgium, September 1, 2011
In recent years there is a growing interest in the
simulation and modeling of flows in living organisms. The
main applications are related to blood flow in the vessels
and airflow in the respiratory tract. But also other
applications such as e.g. fluid and solute transport in
bones, artificial blood pumps, phonation and speech
production fall into the category of biological flows.
-
ANSYS Informationstage 2011
Seminar, verschieden , verschieden, Germany, September 1, 2011
Das Seminar vermittelt Ihnen einen Ueberblick ueber die
verschiedenen ANSYS CFD-Einsatzmoeglichkeiten.
-
Modeling and Simulation of Nano/Microsystems Contest
EECS, Ann Arbor, United States, September 1, 2011
National Nanotechnology Infrastructure Network computation,
NNIN/C, project at Michigan is sponsoring a contest on
"Modeling and Simulation of Nano/Microsystems" , and all
interested graduate students are encouraged to participate
this competition. The first place will be awarded $1,000.00.
The second place will be awarded $500.00 and the third place
winner will receive $300.00.
-
NUMAP-FOAM Summer School 2011
Workshop, Faculty of Mechanical Engineering, Zagreb, Croatia, August 31, 2011
A Summer School for graduate students and young researchers
working with OpenFOAM, providing individual tuition over 2
weeks.
-
Unmanned Aircraft Systems
Conference, Paris Las Vegas, Las Vegas, United States, August 30, 2011
"We will continue to see significant [unmanned aircraft]
growth for some years into the future..." –Secretary of
Defense Robert Gates
-
ANSYS Webinar: Streamline Mixing Analysis and Enable Quality by Design Using ANSYS Workbench
Online Event, August 23, 2011
Using a prototypical fermentation process as an example, we
will demonstrate the ability of the ANSYS Workbench platform
to conduct multivariate analysis with a high degree of
automation in all phases of the problem. The results will
illustrate how CFD coupled with statistical methods can
elucidate the interdependencies between critical process
parameters and process performance, thus establishing a
roadmap for using simulation as an additional tool in the
QbD toolkit.
-
Free Webinar : Training on Introduction to AutoGrid5 v8.9-2
Online Event, August 17, 2011
AutoGrid5 is a full automatic hexahedral grid generator
for all types of rotating machinery: complex axial, radial,
and mixed-flow configurations.
-
The 7 seasons seminar-workshop on 'New Breakthrough in Modern CFD' on 11th August 2011.
Seminar, Universiti Putra Malaysia, Serdang, Malaysia, August 11, 2011
The discussion focuses on current development in different
discipline of engineering computation such as unstructured
CFD code for external flow, Turbomachinery CFD for fan &
propeller aerodynamics and aeroacoustic design. The key
world is to achieve the highest level of shrinking the CFD
cycle by demonstrating of fully automatic mesh, convergence
accelerator (CPU booster), dynamic mesh adaptation,
multi-grid technique and etc.
-
[Webinar] Adjoint Optimization using FUN3D & Sculptor
Online Event, August 10, 2011
NASA FUN3D & Sculptor Adjoint-Based Optimization gives 20%
improved designs in a fraction of the time
-
CFD Technical Seminar
Seminar, Hotel Westin, Koregaon Park, Pune, Iran, August 9, 2011
One day Techinical Smeinar on ESI's CFD and Multiphysics
Solutions and services
-
Free Webinar: Training on Introduction to FINE/Marine v2.3-1
Online Event, August 8, 2011
FINE/Marine is a Flow Integrated Environment especially
designed for marine applications.
-
FREE Webinar on CFD software for turbomachinery - Pushbutton CFD
Online Event, August 4, 2011
Computational Fluid Dynamics, or CFD, can be a useful tool
in the design process of turbomachinery, but the accuracy
of performance data obtained from CFD typically depends on
the skill of the designer/engineer in generating grids,
setting up boundary conditions, and interpreting results.
-
Thermal testing standards: JEDEC Standards - What's the latest news?
Online Event, July 28, 2011
This webinar aims at introducing existing thermal testing
standards for packaged semiconductor devices: an overview
of thermal metrics, test methods and test environments will
be given.
-
OpenFOAM: a two-day introductory course
Course, IBM Innovation Center, Chicago, United States, July 27, 2011
This two-day course is delivered by Prof. H. Jasak, one of
the main developers of OpenFOAM.
-
Understanding the thermal impedances in power LED applications
Online Event, July 27, 2011
Thermal impedance is dynamic property of any semiconductor
package. In simple words, it describes how long does it
takes for an encapsulated chip to heat up to the steady-
state value of the junction temperature when the power is
abruptly switched on or how long it takes for the chip to
cool down to the ambient temperature when the power is
switched on.
-
LED Thermal Characterization Made Easy
Online Event, July 26, 2011
Join Mentor Graphics for this complimentary web
presentation on LED Thermal Characterisation Made Easy
-
A First Course on Computational Fluid Dynamics
Course, University of Cambridge Dept of Physics, Cavendish Lab., JJ Thomson Avenue, Cambridge, United Kingdom, July 25, 2011
Professor P Roe (Aerospace, Michigan).
The course will provide a solid foundation on traditional
and advanced numerical discretisation techniques for the
solution of the various partial differential equations which
govern fluid flow, showing how successful numerical methods
are rooted both in mathematical properties of those
equations and in notions of computational efficiency.
-
Demystifying LED Design for Everyday Applications with Concurrent CFD
Online Event, July 25, 2011
Join Mentor Graphics for this complimentary web
presentation on improving your LED Design with Concurrent
CFD
-
Training Program on CFD: Design and Analysis
Course, Dr Marri Chenna Reddy HRD Institute, Road no 25 Jubilee Hills, Hyderabad, India, July 19, 2011
Zeus Numerix announces a 4 day training program in CFD.
Program will be useful for Design and Analysis using CFD.
Training program focuses on problem modeling and best
practices in CFD.
-
Short course in wind engineering
Course, Amsterdam RAI, Europaplein 22, NL 1078 GZ Amsterdam, Netherlands, July 6, 2011
In conjunction with JDH consulting, the Wind Engineering
research group at the University of Birmingham have
developed a unique series of master classes in Wind
Engineering, which aim to provide a broad introduction to
the subject. These classes will be delivered in the week
before the International Conference on Wind Engineering in
Amsterdam. For full details please visit the Wind Research
website by clicking on the link below.
-
Clean Air 2011
Conference, Instituto Superior Técnico, Av. Rovisco Pais 1049-001, Lisbon, Portugal, July 5, 2011
Conference on clean combustion technologies and use of
alternative fuels.
-
10th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows - ISAIF10
Conference, Vrije Universiteit Brussel (VUB), Brussels, Belgium, July 4, 2011
The 10th International Symposium on Experimental and
Computational Aerothermodynamics of Internal Flows, ISAIF10
will take place at the conference center of the Vrije
Universiteit Brussel (VUB), Brussels, Belgium on July 4-7, 2011.
-
Virtual Intracranial Stenting Challenge 2011 (VISC11)
Kerry Hotel Pudong, Shanghai, China, July 1, 2011
Virtual Intracranial Stenting Challenge (VISC) is an
international initiative whose aim is to establish the
reproducibility of state-of-the-art haemodynamical
simulation techniques in subject-specific stented models of
intracranial aneurysms (IAs)
-
Web Seminar: Design of Health Care Facilities Using Computational Fluid Dynamics
Online Event, June 30, 2011
Join Mentor Graphics for this live web presentation where
they will show you how using CFD can help you to conform to
the new ASHRAE Standard on Ventilation of Health Care
Facilities
-
CD-adapco's STAR American Conference 2011
Conference, Chicago Marriott O'Hare 8535 West Higgins Road, Chicago, United States, June 28, 2011
On June 28 and 29, 2011, the STAR American Conference will
be held at the Marriott Chicago O'Hare. The theme of this
year's Conference is Engineering Success. This theme
explores the techniques, support and technology that will
empower you to revolutionize your CAE process, ultimately
making you more successful both personally and in achieving
your organization's objectives.
-
Cardiovascular Fluid Mechanics: from theoretical aspects to diagnostic and therapeutic support
Workshop, Faculty of Engineering, Cagliari, Italy, June 27, 2011
Euromech Colloquium 529 and ERCOFTAC SIG37 Workshop W01-2011
-
Free Webinar : Advanced subjects in FINE/Marine v2.2-3
Online Event, June 22, 2011
FINE/Marine, dedicated to marine applications, is the
latest CFD product from NUMECA International. It offers
high accuracy flow simulation results on arbitrary and
complex geometries, leading to shorter design cycles.
-
CFD 2011: 8th International Conference on CFD in the Oil & Gas, Metallurgical and Process Industries
Conference, Trondheim, Norway, June 21, 2011
The conference will focus on the application of CFD in the
oil and gas industries, metal production, mineral
processing, power generation, chemicals, food and other
process industries. The conference will target subject such
as applications for CFD, fundamentals for CFD (e.g. closure
laws, bubble and droplet dynamics), modeling concepts (e.g.
finite volume, SPH and DEM) and new experimental techniques
and CFD validation experiments.
-
ANSYS Belgium Seminar PART I: Pre-Processing - Geometry and Meshing Seminar
Seminar, Radisson Blu Astrid Hotel, Antwerpen, Belgium, June 21, 2011
Join us for this half-day free seminar and learn how
engineers are using comprehensive CAD and meshing tools to
create suitable models for their CAE analyses.
-
6th International Conference on Computational and Experimental Methods in Multiphase and Complex Flow
Conference, Kos, Greece, June 15, 2011
This conference aims to bring together modellers,
computational scientists and experimentalists to share
experiences, successes, new methodologies and in general to
promote the advancement of this important area of fluid
mechanics.
-
4 day workshop/training in Computational Electromagnetics and its applications
Workshop, CDAC, Bangalore, India, June 14, 2011
Workshop aims at training scientists/engineers in
understanding the concepts of CEM and also apply the
knowledge to real life problems. The workshop will also
expose the participants to the latest techniques in CEM and
their possible applications.
-
Simulation Open Day
Conference, Airport House, Purley Way, Croydon, United Kingdom, June 9, 2011
A free Simulation Open Day with a chance to meet our
Computer Aided Engineering (CAE) Simulation experts and ask
questions about your specialist fields.
-
9th Joint HZDR & ANSYS Workshop and Short Course on Multiphase Flows: "Simulation, Experiment and Application"
Conference, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden, Germany, June 8, 2011
The "Short Course and Workshop on Multiphase Flows:
Simulation, Experiment and Application"
The aim of the workshop is to bring together experimental
and numerical practitioners in the field of multiphase flow
applications and to foster discussion and exchange amongst
them.
-
Free Webinar : Modeling Supersonic flows in FINE/Hexa v2.10-4
Online Event, June 8, 2011
FINE/Hexa is a powerful CFD Flow Integrated Environment
dedicated to complex internal and external flows. It
combines completely unstructured hexahedral grids with an
efficient preconditioned compressible solver with fast
agglomerated multigrid acceleration and adaptation
techniques.
-
The International Symposium on Finite Volumes for Complex Applications 6
Conference, Prague, Czech Republic, June 6, 2011
The organisers intend to give the opportunity of a large and
critical discussion about the various aspects of Finite
Volume methods: Mathematical results, numerical techniques,
but also validations via industrial applications and
comparisons with experimental test results. By critical we
mean that the qualities of the methods but also their limits
should be shown, as well as new approaches. New ideas are
explicitly welcome.
-
Single & Two-phase Flow in Safety Devices
Course, Chaussee de Waterloo, 72, 1640 Rhode-Saint-Genese, Belgium, June 6, 2011
The objective of this 4-day lecture series is to provide a
state-of-the art of flow modeling of control and safety
devices with peculiar emphasis given to safety relief valves.
-
Pumps Course for Professional Deveopment - Pune, India
Course, The Pride Hotel, 5 University Road, Shivajinagar, Pune, India, June 6, 2011
This Course is designed to help engineers design, test, and
run more effective, more economical, and more reliable
pumps. Engineers will come to understand the best state-of-
the-art design practices and learn the latest theories on
performance, cavitation, dynamic forces, and noise. The
course will review the latest advances in design tools
(CFD, FEA, Optimization) and will provide designers with
expert and relevant instruction on pump design optimization.
-
Free Webinar : Managing ZR effects in AutoGrid5 v8.9-1
Online Event, June 1, 2011
AutoGrid5 is a full automatic hexahedral grid generator
for all types of rotating machinery: complex axial, radial,
and mixed-flow configurations.
-
Workshop Advanced Techniques in CFD
Workshop, Konarskiego 22, block C, Gliwice, Poland, June 1, 2011
The Institute of Thermal Technology, Gliwice, Poland is
organising the workshop on advanced techniques in CFD. The
event offered to young reseachers (including PhD students)
will be held in Gliwice, Poland on 1-3 June 2011. The three-
day programme includes both lectures and hands-on training
sessions. The lecturers will be the researchers from the
ITT and from the partner institutions collaborating witin
the RECENT project (http://www.itc.polsl.pl/recent).
-
15th International Conference on Computational Methods and Experimental Measurements
Conference, Wessex Institute of Technology, New Forest, United Kingdom, May 31, 2011
Computational Methods and Experimental Measurements (CMEM
2011) provides the international technical and scientific
community with a forum to discuss the interaction and the
complementary aspects of computational methods and
experimental measurements, the main consideration and
importance being their advantageous integration.
-
11th FLOW-3D European Users Conference
User Conference, Hotel Royal Falcone, Monza, Italy, May 26, 2011
The 11th annual FLOW-3D European Users Conference will be
held on May 26-27, 2011 at the Hotel Royal Falcone in Monza,
Italy. The conference is open to FLOW-3D users and other
persons throughout Europe who are interested in FLOW-3D. The
meeting will feature user presentations from a variety of
industrial and research applications as well as the latest
developments for FLOW-3D presented by Flow Science
representatives. A half-day of advanced training will be
offered the day before the conference.
-
ERCOFTAC: Transition Modelling
Course, GE, GLOBAL RESEARCH, Munich, Germany, May 25, 2011
In aerodynamic flows, transition is typically the result of
flow instability of Tollmien-Schlichting type or cross flow
type. In turbomachinery flows, the main transition
mechanism is bypass transition imposed on the boundary
layers by high levels of free stream turbulence.
The course aims are:
- Overview of transition modelling approaches
- A discussion of transition mechanisms
- Detailed discussion of approaches
- Recomm for effective application of transition models
-
Fourteenth International Conference on Aerospace Sciences & Aviation Technolgy, ASAT-14
Conference, Military Technical College, Kobry Elkobbah, Cairo, Egypt, May 24, 2011
The Military Technical College, Cairo, Egypt, has the
pleasure to organize ASAT-14 in May 24-26, 2011. In addition
to regularly scheduled scientific sessions; separate
exhibition and seminars will be devoted
to the presentation of latest achievements in aerospace
applications. This conference activity is intended to be a
forum that facilitates and promotes communication and
cooperation among the conference participants.
-
Fluid Flow and Chemical Reactions Training
Course, COMSOL BV, Zoetermeer, Netherlands, May 24, 2011
Learn how easy it is to couple fluid flow and mass and
energy transport to chemical reaction kinetics. Analyze and
solve simulation problems by using COMSOL Multiphysics
simulation environment.
-
CD-adapco Seminar: The Virtual Wave Basin
Seminar, Houston Marriott Westchase, 2900 Briarpark Dr., Houston, United States, May 24, 2011
Attend this seminar and you will discover how Naval
Architects from companies like Alan C. McClure Associates
(ACMA), a major Drilling Contractor and others, have added
STAR-CCM+ - the leading flow and thermal simulation tool
(CFD) - to their toolkit, and how it is helping them to
answer both design and operational questions.
-
NAFEMS World Congress 2011
Conference, Hyatt Harborside, Boston, United States, May 23, 2011
The NAFEMS World Congress 2011, being held in Boston, MA,
USA from May 23rd-26th 2011, will be the only independent,
international conference focusing on all aspects of
simulation technology and their impacts on society and
industry as a whole.
As the most respected and long-standing association
dedicated to FEA, CFD and associated technologies, NAFEMS is
the independent voice of the CAE world.
-
CFD: An Executive Overview
Course, Cranfield University, Cranfield, United Kingdom, May 23, 2011
This is a single day course intended to give an overview
into the use of CFD for industrial problems. It starts with
a brief introduction to CFD methods and details best
practice for completing a good CFD analysis. We focus then
on practical necessities such as the range of software tools
available for grid generation, CFD simulations and
post-processing. Finally, the day finishes with a summary of
future directions and trends within the field.
-
Workshop: Efficient CAD to CFD Processes for Faster and More Accurate Analysis
Workshop, Hyatt Westlake Plaza in Thousand Oaks 880 S. Westlake Blvd. , Westlake Villiage, United States, May 19, 2011
We would like to invite you to attend a complimentary half
day workshop on the benefits of taking CAD directly into CFD
simulation. Trainers will cover the latest surface wrapping
and meshing technologies that eliminate manual repair from
the CFD process altogether. This guarantees a faster route
from CAD to flow simulation, and frees engineers to
concentrate on engineering analysis. Demonstrations will
include examples of multiphase flow, heat transfer and
thermal stress analysis.
-
International Conference on Mechanical, Automotive and Aerospace (ICMAAE '11)
Conference, Kuala Lumpur, Malaysia, May 17, 2011
The Faculty of Engineering, International Islamic
University Malaysia is organizing this International
Conference to bring together researchers and engineering
professionals from all over the globe to meet and
deliberate in the beautiful green city of Kuala Lumpur.
-
Turbulence in High Speed Flow
Course, Chaussee de Waterloo, 72, 1640 Rhode-Saint-Genese, Belgium, May 16, 2011
VKI-LS
The goal of this Lecture Series is to present the
state-of-the art in compressible turbulence from the
theoretical, experimental and numerical view points.
-
ParCFD 2011 Tutorial on GPUs for CFD
Conference, "Institut d’Estudis Catalans” (IEC), Carrer del Carme 47, Barcelona, Spain, May 16, 2011
Tutorial on GPUs for CFD Applications at the International
Conference on Parallel CFD (ParCFD) 2011
-
Understand the Thermal Impedances in Power LED Applications
Online Event, May 11, 2011
In this complimentary web presentation from Mentor
Graphics, an overview of thermal impedance and its
alternate representations will be explained, along with LED
related issues. We shall also highlight why the AC thermal
impedance of LEDs shrinks with increasing frequency.
Suggestions for measurement of this property using
existing, standard test methods will also be given.
-
Free Webinar : Introduction to HEXPRESS/Hybrid v2.11-0
Online Event, May 11, 2011
HEXPRESS/Hybrid is an unstructured -Hex Dominant -
conformal body fitted parallel grid generator and CAD
cleaner/wrapper for arbitrary geometries.
-
Introductory Programming Training in OpenFOAM technology
Course, Graz, Austria, May 10, 2011
The purpose of this training is to introduce structure of
the OPENFOAM® software so, that trainees will be able to
modify and create solvers or utilitiies, and also modify
some basic library components, like turbulence models or
boundary conditions.
-
FEMTEC 2011
Conference, Harvey's Casino and Resort, South Lake Tahoe, United States, May 9, 2011
3rd International Conference on Finite Element Methods in
Engineering and Science
-
6th International Conference on Fluid Structure Interaction
Conference, University of Central Florida, Orlando, United States, May 9, 2011
The principal aim of this conference is to promote
international exchange of knowledge of fluid
structure interaction problems, giving experts from
different application fields the opportunity to interact
with one another and to provide valuable cross breeding of
ideas and techniques. The conference will encompass a wide
range of topics ranging from different types of fluids to
different types of structures. New research for the
advancement of interaction problems will be the main focus.
-
OpenFOAM-1.6-ext: A Two-day Introductory Course
Course, Gothenburg, Sweden, May 4, 2011
This two-day course is delivered by Prof. H. Jasak, one of
the main developers of OpenFOAM.
-
Free Webinar : Introduction to FINE/Marine v2.2-3
Online Event, May 4, 2011
FINE/Marine is a Flow Integrated Environment
especially designed for marine applications. It offers
high accuracy flow simulation results on arbitrary and
complex geometries, leading to shorter design cycles.
-
Block-structured Adaptive Mesh Refinement: Theory, Implementation and Applications
Course, University of Cambridge Dept of Physics, Cavendish Lab., JJ Thomson Avenue, Cambridge, United Kingdom, May 4, 2011
Dr B Henshaw, Dr R Deiterding. Structured adaptive mesh
refinement (SAMR) techniques can
enable cutting-edge simulations of problems governed by
conservation laws. The approach aims at preserving the high
computational performance of uniform grids on a
hierarchically adapted non-uniform mesh.
-
Free Webinar: Retrofitting of Turbomachinery - from Scanned Data to a New Efficient Flow Path
Online Event, April 28, 2011
SoftInWay has scheduled the next free webinar on
turbomachinery retrofitting techniques used to increase
efficiency using AxSTREAM. The webinar will be held on April
28, 2011, at 10 a.m. and 4 p.m. EST.
-
International Workshop on the Advances in Computational Methods for Fluid-Structure Interaction
Workshop, Biopolis Matrix Building, Level 4, Exploration Theatre, Singapore, Singapore, April 27, 2011
The International Workshop on the Advances in Computational
Methods for Fluid Structure Interaction is the first
international conference/workshop to be held in Asia
Pacific. It aims to provide a platform for researchers,
scientists and engineers specialised in the field of fluid
structure interaction, particularly in this part of the
world, to discuss and keep abreast on the state of the art
methods, and computational techniques from leading experts
in the world.
-
Thermal Testing Standards: JEDEC Standards - What's the Latest News?
Conference, Argentina, April 20, 2011
Joint Mentor Graphics for this complimentary web seminar
which aims to introduce existing thermal testing standards
for packaged semiconductor devices.
-
Introductory Programming Training in OpenFOAM technology
Course, Hamburg, Germany, April 12, 2011
The purpose of this training is to introduce structure of
the OPENFOAM® software so, that trainees will be able to
modify and create solvers or utilitiies, and also modify
some basic library components, like turbulence models or
boundary conditions.
-
Free CAPRI - MATLAB Interoperability Gateway Webinar
Online Event, April 8, 2011
Join us for a FREE one hour demonstration on the exciting
new product offering from CADNexus. The CAPRI-MATLAB
interoperability connection provides easy bidirectional
access to native CAD models (Pro E, CATIA, SolidWorks, NX,
Inventor) from within the MATLAB environment. Engineers
using MATLAB for physical modeling and simulation tasks can
use CAPRI to seamlessly import and modify CAD designs in
their programs.
-
2-day course on Smoothed Particle Hydrodynamics (SPH)
Course, Schoo of Mechanical, Aerospace and Civil Engineering, Manchester, United Kingdom, April 7, 2011
2-day course on Smoothed Particle Hydrodynamics (SPH) at the
University of Manchester.
-
Free Webinar : Introduction to FINE/Turbo v8.9-1
Online Event, April 6, 2011
FINE/Turbo is a fast and accurate Flow Integrated
Environment available for the simulation of internal,
rotating, and turbomachinery flows, and this for all type of
fluids. FINE/Turbo integrates a fully hexahedral, highly
automated grid generator, AutoGrid5, advanced density-
based numerical algorithms with local preconditioning. The
package is completed by CFView, an advanced visualization
tool.
-
Planes, Trains and Automobiles: Cabin Comfort Using CFD
Online Event, April 6, 2011
Join Mentor Graphics for this complimentary web
presentation on thermal comfort in passenger cabins.
-
Advanced Turbulence Modelling
Course, Cranfield University, Cranfield, United Kingdom, April 6, 2011
This course gives a detailed introduction to unsteady
turbulent flow physics, with a particular focus on DES and
LES methods. It discusses the theoretical and numerical
approaches, and the best practice to adopt when conducting
an LES. Examples are given of LES of industrial problems
demonstrating methods of analysis, verification and
visualisation.
-
Recent Development in Unmanned Aircraft Systems (UAS, including UAV and MAV)
Course, Chaussee de Waterloo, 72, 1640 Rhode-Saint-Genese, Belgium, April 4, 2011
The course will focus on recent developments of fixed wings,
flapping wings, and rotary wings unmanned aircraft systems
(UAS) in particular lightweight UAS.
-
CFD for Micro-Scale Flows
Conference, Cranfield University, Cranfield, United Kingdom, April 4, 2011
This course gives discusses in depth the flow physics
associated with micro-scale flows, and details the methods
which can be employed to analyse them. This includes the use
of continuum models (CFD) and Molecular Dynamics (MD)
approaches, including the limitations of the two methods.
Current cutting edge multiscale modelling approaches are
also detailed, where both large and small scale effects come
into play.
-
Free Webinar: Advanced Design of Multistage Centrifugal Compressor
Seminar, online, United States, March 31, 2011
The scope includes overall multistage centrifugal compressor
design, separate stages design, performance maps simulation,
and usage of interstage cooling for industrial compressor.
-
Free Webinar : Introduction to AutoBlade v8.9-1
Online Event, March 30, 2011
AutoBlade is an advanced and easy-to-use parametric
modeller dedicated to the design of rotating and
turbomachinery blades and channels. AutoBlade provides a
multiview layout for fast editing and analysis of the design
parameters, with a full undo/redo capability.
-
ICON CFD Seminar Series
Seminar, Argentina, March 28, 2011
The ICON CFD Seminar Series is designed to address typical
questions on Open Source CFD processes and highlight the
potential benefits to be gained from using Open Source CFD.
The seminars are aimed at Managers and Engineers of CFD and
R&D departments who are interested in utilising computer
simulations to model fluid flow in a range of applications.
-
International Conference on Thermal Energy and Environment
Conference, Department of Mechanical Engineering, KALASALINGAM UNIVERSITY , Srivilliputhur, India, March 24, 2011
International Conference on Thermal Energy and Environment
(INCOTEE 2011) aims to provide a common platform for
gathering of scientists, leading engineers, industry
experts,
research scholars and advanced student learners to exchange
and share their experiences and research outcome. INCOTEE
2011 focus on new advances and research results in the
fields of theoretical and experimental applied Thermal
Engineering, Energy and Environment.
-
Proven Engineering Simulation Solutions for the Nuclear Industry
Seminar, Virutal Engineering Centre, Daresbury, Warrington , United Kingdom, March 23, 2011
The seminar will provide an opportunity to learn about
Computer Aided Engineering (CAE Methods for the Nuclear
Energy Industry) and network with colleagues for the UK's
Nuclear Engineering Community
-
Introductory Programming Training in OpenFOAM technology
Course, Windsor, United Kingdom, March 22, 2011
The purpose of this training is to introduce structure of
the OPENFOAM® software so, that trainees will be able to
modify and create solvers or utilitiies, and also modify
some basic library components, like turbulence models or
boundary conditions.
-
Turbulent Combustion
Course, Chaussee de Waterloo, 72, 1640 Rhode-Saint-Genese, Belgium, March 21, 2011
The objective of this biannual Lecture Series on Turbulent
Combustion is to present the state-of-the-art review of
on-going activities in turbulent combustion and to outline
current research directions
-
International meteodyn WT Users' Meeting
User Conference, Hotel Bergère Opéra, PARIS, France, March 21, 2011
2 days to improve your knowledge of WT, to meet us and share
your experience with users from all over the world
-
The 9th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics
Conference, Istanbul Technical University Ayazaga Campus, Maslak / 80626 Istanbul, Turkey, March 21, 2011
The 9th European Conference on Turbomachinery Fluid Dynamics
and Thermodynamics (ETC 9) is being organised in March 2010
in Istanbul, beginning on Monday, March 21 and concluding on
Friday, March 25. The 5-days technical program is
supplemented with a series of social events over the week
fostering international friendship, discussions and
collaborative ventures.
|
