-
OpenFOAM Overset course
Online Event, June 13, 2018 This course covers Theoretical and Applied concepts using overset (chimera)
meshing in OpenFOAM.The training provides examples of process and best
practice, which are useful to existing OpenFOAM users wishing to broaden their
application knowledge of OpenFOAM towards using overset meshing as an
alternative to mesh morphing or sliding interfaces.
-
OpenFOAM Aeroacoustics course
Online Event, June 12, 2018 This course covers Theoretical and Applied concepts in Aeroacoustics (CAA) using
OpenFOAM, touching on progressive Multiphysics design challenges, e.g. Aero-
Vibro-acoustics (AVA).The training provides examples of process and best
practice.
-
CFD 2018
Conference, University of Manitoba, Winnipeg, Canada, June 10, 2018 The CFD Society of Canada cordially invites the research
community to contribute to the CFD2018 conference. Rapid
advances in computing technology have made CFD an
increasingly important tool for predicting and analyzing
fluid flow and heat and mass transfer, with applications to
mechanical, aerospace, civil, and chemical engineering.
Contributions from all sectors are solicited, across the
full spectrum of CFD research and applications.
-
Optimizing Ventilation in Power Plants with CFD
Online Event, June 7, 2018 This webinar will demonstrate how CFD can be used to
optimize the
ventilation system layout of a power plant.
-
ERCOFTAC-Wind Loads on Structures, 7-8 June 2018, MOE , Copenhagen, Denmark
Seminar, MOE, COPENHAGEN, Denmark, June 7, 2018 A two day seminar encompassing recent advances in the
modelling and simulation of wind loads on structures, where
the structures expressed range from the built environment
and on to wind turbines. The aim is to utilise recent
advances in both experimental and computational techniques
to discover and support new best practices in this
domain.Topics cover advances in CFD (turbulence modelling),
FSI,Stochastics,Wind tunnels,calibration methods,onto
validation and verification.
-
ERCOFTAC - Computational Aeroacoustics, III 4-5 June 2018 2018 ONERA, Paris, France
Course, ONERA, PARIS, France, June 4, 2018 Designed for researchers in industry and academia.
Aim:
1) full overview of aeroacoustics theories,2) discuss the
practical coupling between CFD’s results and CA , 3) review
applications in engineering 4) Present advanced CA methods,
5) review the direct computation of aerodynamic noise, and
6) specific topics reflecting participant interests
discussed in a round table session.
-
Online training session on Lattice-Boltzmann Method
Online Event, June 4, 2018 A short online training course on the Lattice-Boltzmann
Method will be organized by CERFACS in June. It aims at
introducing this topic to engineers, PhD students or
researchers willing to get a brief theoretical overview on this
topic. The focus will be on understanding the concepts - not
on mathematics.
-
Weekend batch-Advanced Programme on Computational Fluid Dynamics and Thermal Analysis from 02-June-2018 at 4 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, June 2, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - From 01-June-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, June 1, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
Irrigation System Design Study with CFD feat. L&T
Online Event, May 31, 2018 This free webinar is based on the success story of Larsen &
Toubro
(L&T), India’s largest construction organization and ranked
among
the world’s top 30 contractors.
-
Introducing FloTHERM v12.1
Online Event, May 31, 2018 Learn how FloTHERM v12.1 improves model accuracy and user
productivity.
-
CFD Simulation for Green Building Design: Session 2 - Thermal Comfort for Occupants
Online Event, May 30, 2018 Learn how to use fluid flow simulation to ensure compliance
with
ASHRAE 55 and other standards for thermal comfort in
buildings. We
will look into a case study where thermal comfort was
optimized in
on office.
-
Webinar: An Introduction to FlowVision CFD Software – The Unique Modeling Technologies & Simulation Capabilities
Online Event, May 30, 2018 Sub-Grid Geometry Resolution (SGGR™); lossless CAD
associativity
Grid Adaptation; Dynamic local adaptations based on moving
bodies and solution gradients
Moving Bodies; Complete flexibility In
definition/calculation of motions
Fluid-Structure Interaction (FSI); 2-way strong coupling,
realistic results, simple workflow
Gap Model™: Tackle dimensionality problems without
resolving with grid elements
Advanced VOF: Free surface reconstruction and exact mass
conversation
-
How MCW and Envenio Improved a Facility’s Energy Efficiency using HVAC Simulations
Online Event, May 29, 2018 In the webinar, MCW Maricor and Envenio will discuss how
they collaborated
on a recent project to use good mechanical HVAC design and
airflow
simulations to reduce capital costs and improve energy
efficiency in a
production facility.
-
Online training session on thermo-acoustic instabilities
Online Event, May 28, 2018 A short online training course on Thermo-acoustic Instabilities
will be organized by CERFACS in May/June. It aims at
introducing this topic to engineers, PhD students or
researchers willing to get a brief theoretical overview on this
topic. The focus will be on understanding the concepts - not
on mathematics. It starts on Monday, May 28.
-
Optimizing Industrial Ventilation with CFD
Online Event, May 24, 2018 In this 30-minute webinar, you will learn how to investigate
industrial buildings designs and industrial ventilation using
cloud-based CFD in order to ensure that the contamination
inside
the workers breathing zone is below the threshold value.
-
CFD Simulation for Green Building Design: Session 1 - Energy Efficient Designs for Buildings
Online Event, May 23, 2018 Learn the fundamentals of fluid flow simulation and how it can
be
used to meet the requirements of the LEED green building rating
system. Together with the instructor, you will analyze natural
ventilation in a green building.
-
16th INTERNATIONAL COURSE Simulation Methods Used for the In-flight Icing Certification of Aircraft, Rotorcraft and Jet Engines
Course, 410 Sherbrooke Street West, Montreal, Canada, May 21, 2018 This course illustrates the state-of-the-art of CFD
applications in icing
simulations and links theory to application. It is structured
to be of equal interest to aerodynamicists, icing,
environmental systems
and flight simulation engineers, regulators and
Designated Engineering Representatives.
-
Thermal Design Considerations for Autonomous Vehicle Electronics
Online Event, May 17, 2018 During this presentation, we will discuss thermal design
considerations when integrating electronics that enable
Autonomous vehicles.
-
[Free Live Webinar] Compressible solver and Adaptive Mesh Refinement
Online Event, May 16, 2018 Check out how to use Compressible Solver and Adaptive Mesh
Refinement in MATLAB.
-
[Live Webinar] - Vertical / Custom Application for Faster and Reliable HRSG CFD Simulations
Online Event, May 16, 2018 Tridiagonal Solutions Inc, provides process performance
enhancement and product development solutions to its
clients, will be hosting a free webinar on
“Vertical/Custom Application for Faster and Reliable HRSG
CFD Simulations” on May 16, 2018 at 11:00 am CST, 5:00 pm
BST and 6:00 pm CEST.
The webinar will demonstrate the use of vertical/custom
CFD
application for Heat Recovery Steam Generator (HRSG)
-
[Live Webinar] - Vertical / Custom Application for Faster and Reliable HRSG CFD Simulations
Online Event, May 16, 2018 Tridiagonal Solutions Inc, provides process performance
enhancement and product development solutions to its
clients, will be hosting a free webinar on
“Vertical/Custom Application for Faster and Reliable HRSG
CFD Simulations” on May 16, 2018 at 11:00 am CST, 5:00 pm
BST and 6:00 pm CEST.
The webinar will demonstrate the use of vertical/custom
CFD
application for Heat Recovery Steam Generator (HRSG)
-
Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - From 16-May-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, May 16, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
OpenFOAM Advanced course
Course, Neu Isenburg, Germany, May 16, 2018 This course covers advanced topics on the open source CFD toolbox, OpenFOAM.
It is designed to enable the participants to use OpenFOAM effectively on real
engineering problems and develop the toolbox to suit their needs. It covers general
use and programming of OpenFOAM, building on topics presented earlier in the
Foundation Course.
-
[Webinar] Using CFD to Improve Energy Efficiency in Data Center Design
Online Event, May 16, 2018 This webinar will explain how computational fluid dynamics
simulations carried out with the SimScale cloud-based platform
can help you reduce the cooling cost of an existing data center
by optimizing the supply air temperature and the supply air
flow rate, based on the CFD results and cost functions.
-
[Live Webinar] - Vertical / Custom Application for Faster and Reliable HRSG CFD Simulations
Online Event, May 16, 2018 Tridiagonal Solutions Inc, provides process performance
enhancement and product development solutions to its
clients, will be hosting a free webinar on
“Vertical/Custom Application for Faster and Reliable HRSG
CFD Simulations” on May 16, 2018 at 11:00 am CST, 5:00 pm
BST and 6:00 pm CEST.
The webinar will demonstrate the use of vertical/custom
CFD application for Heat Recovery Steam Generator (HRSG)
-
2018 Energy & Process Simulation Symposium
Conference, Wyndham Houston West Energy Corridor , Houston, United States, May 15, 2018 Join us for a complimentary seminar! Siemens PLM is
pleased to announce the 5th Energy and Process Simulation
Symposium taking place in Houston, Texas on May 15th and
16th.
-
[Live Webinar] - Accelerate your Scale-Up and Tech Transfer using MixIT
Online Event, May 15, 2018 Tridiagonal Solutions Inc, provides process performance
enhancement and product development solutions to its
clients, will be hosting a free webinar on “Accelerate
your Scale-Up and Tech Transfer using MixIT” on May 15,
2018 at 9:00 am BST and 10:00 am CEST.
-
Large Eddy Simulation - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-genesius-Rode, Belgium, May 14, 2018 The purpose of this Lecture Series is to offer a full
overview of the present development and the potential of
the Large Eddy Simulation (LES) of turbulent flows. Its
content is addressed both to researchers interested in the
fundamental simulation of turbulence and engineers wanting
to apply the LES technique or LES solvers to the accurate
simulations of turbulent flows.
-
The 30th International Conference on Parallel Computational Fluid Dynamics
Conference, Omni Severin Hotel, 40 W Jackson Pl, Indianapolis, United States, May 14, 2018 Parallel CFD (ParCFD) is an annual international
conference devoted to the discussion of recent
developments in parallel computing and its applications
to the field of CFD and related disciplines. Since the
establishment of the ParCFD conference series, parallel
computing technology has evolved from GFLOPS machines to
PFLOPS supercomputers. ParCFD 2018 will include
contributed and invited papers, and also panel
discussions.
-
OpenFOAM Foundation course
Course, ESI GmbH, Siemensstrae 12, Neu-Isenburg, Germany, May 14, 2018 This course introduces the open source CFD toolbox, OpenFOAM. It provides a
foundation for all aspects of OpenFOAM, from running cases to programming, so is
useful to both new users and existing users wishing to broaden their basic
knowledge of OpenFOAM.
-
Virtual OpenFOAM Foundation course
Online Event, May 14, 2018 This course introduces the open source CFD toolbox,
OpenFOAM. Online training
via internet. It provides a
foundation for all aspects of OpenFOAM, from running cases
to programming, so is
useful to both new users and existing users wishing to
broaden their basic
knowledge of OpenFOAM.
-
[ Live Two Day Training Event ] Mixing in the Process Industries - San Francisco, CA - May 10 &11, 2018
Workshop, 655 Montgomery St, Suite 400, San Francisco, United States, May 10, 2018 The event will deliver the followings:
- How mixing science acts as an organizing principle for
various aspects of industrial mixing practice?
- It will further show how mixing science can be used to
reliably and seamlessly design/select the right kind of
mixing equipment for a given application.
- The utility of computational tools (CFD for fluids, DEM
for bulk solids) will also be shown via a number of
industrial examples.Process engineers and researchers
alike will find this event useful.
-
[Live Webinar] - Mixing In The Food Industry
Online Event, May 10, 2018 Tridiagonal Solutions Inc, provides process performance
enhancement and product development solutions to its
clients, will be hosting a free webinar on “Mixing In The
Food Industry” on May 10, 2018 at 1:00 pm CST, 7:00 pm BST
and 8:00 pm CEST.
-
[Live Webinar] - Mixing In The Food Industry
Online Event, May 10, 2018 Tridiagonal Solutions Inc, provides process performance
enhancement and product development solutions to its
clients, will be hosting a free webinar on “Mixing In The
Food Industry” on May 10, 2018 at 1:00 pm CST, 7:00 pm BST
and 8:00 pm CEST.
-
Shallow Flows - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-genesius-Rode, Belgium, May 7, 2018 The purpose of this Lecture Series is to offer an overview
of various aspects of shallow flows: fundamental as well as
applied aspects, and numerical modelling as well as
laboratory studies and field observations.
-
Online Training Program on CFD with OpenFOAM
Course, India, May 7, 2018 The goal of the present training is to objectively
appreciate the open source CFD code OpenFOAM for use on
various types of problems. This training gives the platform
to the participant to understand OpenFOAM for primary to
advanced to programming level.
-
Weekend batch-Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - 06-May-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, May 6, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
Join us for a Free 30 minute Webinar: ANSYS on Azure
Online Event, May 3, 2018 Learn how you can benefit from taking your ANSYS simulations
to a cloud, such as Microsoft Azure.
-
Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - From 02-May-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, May 2, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
PCB Thermal Modelling with Empirical Thermal Conductivity Methods
Online Event, April 26, 2018 Attend this web seminar to learn more about PCB effective
thermal conductivity modelling and to learn more about the
accuracies of the empirical method vs analytical method.
-
Moving Mesh & Shape Optimization - Free Webinar
Online Event, April 25, 2018 See how easy it is to deform meshes and perform shape
optimization in MATLAB and join our webinar.
-
Fluid-driven Soft Robots
Workshop, Grand Hotel Palazzo, Livorno, Italy, April 24, 2018 Scalability and new domains of application of novel fluidic
compliant actuators
-
How does CFD complement Business Information Modelling (BIM)?
Online Event, April 19, 2018 In this webinar, we will discuss how computational fluid
dynamics (CFD)
plays a key role in the context of sustainable building
design.
-
Webinar: Thermal-Fluid Simulation for Steam and Gas Turbine Systems
Online Event, April 18, 2018 In this webinar, we will discuss the approach to AxSTREAM
NET™ modeling of different systems found in steam and gas
turbines, namely end seal modeling for a 40 MW steam
turbine, lubrication system modeling for a 500 MW steam
turbine, rotor cooling modeling for a 115 MW gas turbine
and modeling of compressed air cooling in an intermediate
heat exchanger for a 0.5 MW compressor.
-
OpenFOAM Advanced course
Workshop, Madrid, Spain, April 18, 2018 This course covers advanced topics on the open source CFD toolbox, OpenFOAM.
It is designed to enable the participants to use OpenFOAM effectively on real
engineering problems and develop the toolbox to suit their needs. It covers general
use and programming of OpenFOAM, building on topics presented earlier in the
Foundation Course.
-
Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - From 16-April-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 16, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
OpenFOAM Foundation course
Workshop, ESI Group, Planta 3a , Madrid, Spain, April 16, 2018 This course introduces the open source CFD toolbox,
OpenFOAM. It provides a
foundation for all aspects of OpenFOAM, from running cases
to programming, so is
useful to both new users and existing users wishing to
broaden their basic
knowledge of OpenFOAM.
-
Virtual OpenFOAM Foundation course
Online Event, April 16, 2018 This course introduces the open source CFD toolbox,
OpenFOAM. Online training
via internet. It provides a
foundation for all aspects of OpenFOAM, from running cases
to programming, so is
useful to both new users and existing users wishing to
broaden their basic
knowledge of OpenFOAM.
-
2-day course on Smoothed Particle Hydrodynamics (SPH)
Workshop, University of Manchester, George Begg Building, Manchester, United Kingdom, April 10, 2018 With world-leading authorities from research and industry,
this 2-day course on the SPH method will cover
basic theory, develop methodologies for modelling both
fluids (weakly compressible and incompressible), modelling
solids, high-performance computing and GPUs, hands-on
session with the open-source DualSPHysics code for real
applications, industrial perspectives, finishing with latest
state-of-the-art developments for SPH with exciting new
paradigms of variable
resolution and Eulerian SPH.
-
Post-Processing CONVERGE Results with Tecplot 360
Online Event, April 3, 2018 This is a webinar on CONVERGE CFD software presented by
technical partner
Tecplot.
-
Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - From 01-April-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 2, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
Webinar: Ventilation Design Validation for Thermal Comfort with Cloud-Based CFD
Online Event, March 29, 2018 In this free webinar, you will learn how cloud-based CFD
simulations can help you analyze and optimize air conditioning
designs for offices and buildings without leaving the web
browser.
-
Solid Liquid Interfaces: Challenging Molecular Aspects for Industrial Applications [SLIMAIA]
Conference, IFP Energies nouvelles - 4 avenue de Bois Préau, Rueil-Malmaison, France, March 27, 2018 This international event aims highlighting the most
recent advances, presenting a variety of innovative
experimental and theoretical methods that improve our
molecular-scale understanding of SLI and offer
significant promise for specific applications.
It will bring together experts in industrial
applications, cutting-edge characterization techniques
(in situ and operando spectroscopy, calorimetry, etc.)
and computational chemistry from the molecular to the
mesoscale level.
-
4th Workshop of Belgian OpenFOAM®
Workshop, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, March 22, 2018 The workshop is aiming to get together the Belgian OpenFoam®
users, share experiences, show achievements and identify
common interests. The workshop is open to anyone, but
registration is required for better organization. The scope
of the workshop includes the application of OpenFoam®
solvers to predict fluid flows, construction of simulation
platforms for special needs and development new physical models.
-
Annual Physicians Meeting 2018
Conference, JW Marriott Hotel, Abu Baker Al Siddique Road, near Hamarain Sh, Dubai, United Arab Emirates, March 21, 2018 The Conference on “Annual Physicians Meeting 2018” is going
to be held on March 21-23, 2018 at Dubai, UAE. We are most
awaiting to innovate new things in the presence of
specialized physicians by fetching things through their
valuable words.
-
OpenFOAM® General Programming Course
Course, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, March 21, 2018 The programing course shows the how-to for the most common
programming issues in OpenFoam® covering the implementation
of new solver, adding own boundary conditions, modifying
turbulence models and defining user-specific utilities.
-
Introductory course to OpenFOAM®
Course, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, March 19, 2018 The course gives a practical introduction to the structure
and usability of OpenFoam and OpenFOAM related applications
(snappyHexMesh, paraview). Besides the general introduction
the participants will perform a complete numerical
simulation starting from choosing the solver till
post-processing. The second day will be partially dedicated
to the open source mesh generator snappyHexMesh and a
multiphase simulation will be performed with the obtained mesh.
-
ESI OpenFOAM® Advanced Course
Workshop, San Diego, United States, March 15, 2018 This course covers advanced topics on the open source CFD
toolbox,
OpenFOAM. It is designed to enable the participants to use
OpenFOAM
effectively on real engineering problems and develop the
toolbox to suit
their needs. It covers general use and programming of
OpenFOAM, building
on topics presented earlier in the Foundation Course.
-
FloMASTER V9 – What’s New
Online Event, March 15, 2018 Introducing what’s new in FloMASTER V9.
-
Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - From 15-March-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 15, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
Using HVAC Simulations for Indoor Agriculture
Online Event, March 14, 2018 Join us for a webinar Envenio will exploring how CFD
simulations can be
used to characterize common issues within indoor agriculture
operations.
-
ESI OpenFOAM® Foundation Course
Conference, 32605 W. 12 Mile Road, Suite 350, San Diego, United States, March 13, 2018 This course introduces the open source CFD toolbox,
OpenFOAM. It provides a
foundation for all aspects of OpenFOAM, from running cases
to programming, so is
useful to both new users and existing users wishing to
broaden their basic
knowledge of OpenFOAM.
-
CFDEM®training
Course, Industriezeile 35, Linz, Austria, March 12, 2018 If you want to learn how to fully harness the power of open
source DEM and CFD-DEM simulations, visit our short courses
and get crucial knowledge directly from our developers.
LIGGGHTS® DEM Engine / CFDEM®couplingCFD-DEM Engine /
CFDEM®Workbench for LIGGGHTS®
-
CFDEM®training
Course, Industriezeile 35, Linz, Austria, March 12, 2018 If you want to learn how to fully harness the power of open
source DEM and CFD-DEM simulations, visit our short courses
and get crucial knowledge directly from our developers.
LIGGGHTS® DEM Engine / CFDEM®couplingCFD-DEM Engine /
CFDEM®Workbench for LIGGGHTS®
-
5 Days GIAN Course by Prof. Yunus A. Çengel at IIT Indore, India
Workshop, The Centre for Fluid Dynamics, IIT Indore, Indore, India, March 12, 2018 5 Days GIAN Course on 'Energy, Education and Innovation' is
being offered by
Prof. Yunus A. Çengel at IIT Indore.
-
Weekend batch: Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - From 10-March-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 10, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
Achieving Simulation Goals with TotalCAE High-Performance Computing Solutions for CONVERGE
Online Event, March 8, 2018 This is a webinar on CONVERGE CFD software presented by
TotalCAE.
-
Fundamental and Practical Aspects of Waste Heat Recovery Workshop
Workshop, San Diego Convention Center Room #3, San Diego, United States, March 7, 2018 This workshop covers everything from assessment,
opportunities, development and challenges for waste to
energy processes to fluid properties and selection while
diving into thermodynamic cycles and design of waste heat
recovery system components using a combination of both
theoretical and real-life examples.
-
Advanced Programme on Computational Fluid Dynamics and Thermal Analysis - From 01-March-2018
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 1, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
An Introduction to MotorSolve: Rapid Electric Motor Design
Online Event, February 22, 2018 Is it possible to accurately design an electric motor in
less than 20 minutes? Watch this web seminar to find out how!
-
Optimization of Ship Hulls with CAESES and NavCad
Online Event, February 20, 2018 In this webinar, HydroComp and FRIENDSHIP SYSTEMS are
joining forces to show you how their tools NavCad and CAESES
can be combined for the design and optimization of ship hulls.
We will give you an idea of the unique characteristics of
the two tools, what your benefits are and demonstrate the
capabilities and the workflow on some
relevant real-life examples.
-
The 4th International Conference in Ocean Engineering (ICOE2018)
Conference, Dept. of Ocean Engineering, Chennai, India, February 18, 2018 ICOE2018 will be organized by the
Department of Ocean Engineering, IIT Madras. The
department is a centre of
excellence in disciplines spanning across the areas of
ship design, coastal and harbor structures, deep-water
technologies, marine geo-techniques, energy and areas in
oil and gas. With this background, the 4th
ICOE2018 offers a platform for academicians, engineers
from
industry, policy makers and administrators to deliberate
on various conference themes.
-
Industry Oriented Course on CFD analysis from 15-February-2018 (Theory+Ansys Fluent,CFX&ICEMCFD Hexa)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 15, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
What’s New in FloEFD V17.0 and V17.1
Online Event, February 15, 2018 Find out what’s new in FloEFD Version 17.0 and 17.1 that
gives you more physics, capabilities and performance.
-
Thermal Comfort Assessment for ASHRAE 55 with CFD
Online Event, February 14, 2018 In this short webinar, the design of an HVAC system for a large
theater room will be analyzed with CFD, and a second improved
configuration will be designed and suitably tested. The main
decisions explored in this particular analysis are the inlet
and
outlet ventilation locations.
-
Moving boundary problems in Mechanics
Conference, University of Canterbury, Christchurch, New Zealand, February 12, 2018 The conference Recent Advances in Moving Boundary Problems
in Mechanics will take place from Feb 5-8 2018 in
Christchurch, New Zealand. There will be a wide range of
practical topics under discussion, including fluid-
structure interaction, free surface flows, flows over soft
tissues and textiles, flows involving accretion/erosion,
flows through deformable porous media, material forming
and shape optimisation.
-
COBEE2018, Melbourne, Australia Feb 5-9th 2018.
Conference, Storey Hall, RMIT University, Melbourne, Australia, February 5, 2018 The 4th International Conference On Building Energy &
Environment will be held in Melbourne Australia Feb 5-9th
2018. The conference brings forth the increasing demands
for indoor air quality and comfort while maintaining
sustainable practices. A significant portion of
electricity and thermal energy, and the conversion of
primary energy to electricity and thermal energy accounts
for a large portion of greenhouse gas emissions used in
buildings
-
Industry Oriented Course on CFD analysis from 01-February-2018 (Theory+Ansys Fluent,CFX&ICEMCFD Hexa)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 1, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
Improving Building Performance with Simulations: HVAC, Fire, and Wind Applications
Online Event, January 31, 2018 In this webinar, our engineers will demonstrate how modern
CFD tools
play a role in building design & performance. Practical
applications
explored in this webinar will include HVAC, Fire & Smoke,
and Wind
Loading.
-
von Karman Short Course: Radial Compressor Design and Optimization
Conference, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, January 29, 2018 This short course is the regular course on radial
compressors thought at the von Karman Institute to the
turbomachinery students
specializing in compressors in the context of the “Research
Master in Fluid Dynamics”. It provides an overview of the
present knowledge and flow models and intends to provide a
good background for the people interested in the aerodynamic
design of radial compressors.
-
Detailed PCB Thermal Modeling with Thermal Territories
Online Event, January 25, 2018 Whether you are creating a thermal model of a PCB for the
first time or are experienced, this web seminar will provide
insight into the best approach to take given the information
you have at hand.
-
General Purpose GPU Programming
Course, Cranfield University, Cranfield, United Kingdom, January 22, 2018 This five-day continuing professional development (CPD)
programme provides an introduction to programming GPUs for
general computing tasks. On completion you will be able
to: judge when and where to apply GPU computing; use
existing development tools and frameworks to best
advantage; adapt existing algorithms; understand
performance issues.
-
von Karman Lecture Series: Introduction to Computational Fluid Dynamics
Course, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, January 22, 2018 The objective of these lecture series on "Introduction to
CFD" is to provide an elementary tutorial presentation on
computational fluid dynamics (CFD), emphasizing the
fundamentals and surveying a variety of solution techniques
whose applications range from low speed incompressible flow
to hypersonic flow.
-
Industry Oriented Course on CFD analysis from 16-January-2018 (Theory+Ansys Fluent,CFX&ICEMCFD Hexa)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 16, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
GT-SUITE India Conference
Conference, Novotel Pune, Pune, India, January 15, 2018 GT-SUITE is a 1D CFD code used for system level analysis.
Gamma Technologies is excited to host the 2018 India GT
Conference on
Monday, January 15th in Pune. We invite everyone to
register for this free
event. A variety of training classes and seminars will be
held on the days
following the conference.
-
Advanced CFD Tool for Turbo-Machinery Applications
Workshop, IV Sanctum Hotel, 33, 5th Main, Sheshadri Road, BANGALORE, India, January 11, 2018 Hands-on Workshop aims to cover from fundamental
theory to real-time application modelling involving
fluid mechanics,
thermodynamics to Turbo-machines and its Applications. We
will be using FlowVision –Advanced, Realistic CFD
Simulations –
-
International Bhurban Conference on Applied Sciences and Technology (IBCAST)
Conference, National Center for Physics, Islamabad, Pakistan, January 9, 2018 IBCAST is respected as one of the best International
Conference in Pakistan. With highly competitive and
challenging review process, the quality of papers is
excellent. There are 9 activities in parallel during this
conference. Selected international key authors are funded
for partial or full travel bursaries.
-
Sunday batch : Industry Oriented Course on CFD analysis from 07-January-2018 (Theory+Ansys Fluent,CFX&ICEMCFD Hexa)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 7, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Rudresh Ganganna, Former Scientist-ISRO
-
Weekend batch: Industry Oriented Course on CFD analysis from 07-January-2018 (Theory+Ansys Fluent,CFX&ICEMCFD Hexa)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 7, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with
experimental
data for validation purpose.
Faculty: Mr.Rudresh Ganganna, Former Scientist-ISRO
-
Industry Oriented Course on CFD analysis from 02-January-2018 (Theory+Ansys Fluent,CFX&ICEMCFD Hexa)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 2, 2018 Perfect blend of Theory, Software and live
projects.Benchmark Investigation projects with experimental
data for validation purpose.
Faculty: Rudresh Ganganna, Former Scientist-ISRO
-
International Aerodynamics and Fluid Mechanics Congress 2018
Conference, Helsinki, Vanta, Helsinki, Finland, January 1, 2018 ME Conferences is excited to announce the “International
Aerodynamics and Fluid Mechanics Congress 2018, Holistic
and Traditional” that will be held in October 15-16, 2018
at Helsinki Finland, Malaysia. The theme of our
conference is “Emphasizing Latest updates and
Technological advancements in Aerodynamics & Fluid
Mechanics. Aerodynamics Meet 2018 initiates a world of
Aerospace technologies and developments to learn about
the latest research in Aerodynamics.
-
13th OpenFOAM® Workshop
Workshop, Dongchuan Road 800, Shanghai, China, January 1, 2018 The annual OpenFOAM® Workshop is the most important and
influential forum for
researchers and users from universities, institutes as well
as industries
to promote
collaborative activities and share recent advances on
OpenFOAM® in
many areas. It is
an attractive community event opening to scientist, scholars,
engineers, students,
users and contributors, regardless of their background and
avocations.
-
Gompute user meeting
User Conference, Scandic Rubinen hotel, Gothenburg, Sweden, January 1, 2018 Simulation and Data intensive Fair
-
ERCOFTAC-HRLES Methods for Ind CFD, (VIII) Overview, Guidance and Examples 20-21 Nov 2018, NUMECA, BE
Course, NUMECA, BRUSSELS, Belgium, January 1, 2018 course aims:
-An overview of turbulence modelling.
-A firm foundation in the theory and ideas underlying, RANS,
LES and Hybrid RANS-LES techniques.
-Recommendation and guidance for the appropriate and
effective application of Hybrid RANS-LES. Examples from
real-world engineering simulations, using the DES class of
models.
-
XXXVIII International School of Hydraulics
Conference, HOTEL DĘBOWA GÓRA Active & Spa Street: Nowe Rumunki 40/1, Łąck, Poland, January 1, 2018 XXXVIII School of Hydraulics, similarly to previous
events, is intended to provide a forum for scientists and
engineers working in the field of broadly understood
hydraulics.
By bringing together experts (academics and
practitioners) as well as young scientists, we hope to
create a very good atmosphere for scientific debate and
learning, and also to make this occasion an enjoyable
experience for the participants.
-
Design and Topology Optimization using CFD and FEM
Course, Mechanical Engineering, IIT (BHU), Varanasi, India, December 21, 2017 Topology optimization
using Finite Element Method (FEM)/CFD optimizes material
layout within a given design space, for a given set of
loads, boundary conditions and manufacturing constraints
with the goal of maximizing the performance of the system.
Once the component design is freezed, any modifications
becomes a costly affair. This course aims at providing the
much needed FEM/CFD skills to analyze the components at
concept stage for light weight and efficient components.
-
10days course on Computational Methods and Parallel Processing in Science and Technology
Course, National Institute of Technology, Warangal, India, December 20, 2017 This course emphasis on the state-of-art in contemporary
mathematical methods for problems related to fluid dynamics
with a wide spectrum of industrial applications. Topics
will include simulations of complex physical, biological,
and engineering systems, optimization and evaluation of
simulation models, scientific visualization and parallel
computing on GPU (Graphics Processing Unit).
-
4th International Conference on Computational Methods in Engineering and Health Sciences (ICCMEH-2017)
Conference, Manipal Institute of Techology, Manipal University, Udupi, India, December 19, 2017 The International Conference on Computational Methods in
Engineering and Health Sciences (ICCMEH-2017) serves the
purpose of bringing together the computational scientists
and engineers and medical fraternity from various
interdisciplinary domains.
-
One Month /15 days course on Advanced CFD analysis from 15-December-2017, Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2017 Perfect blend of Theory, Software and live projects.
|