-
ESI OpenFOAM Advanced Course
Course, 350 Sparks Street, Suite 220, Ottawa, Canada, May 11, 2017 This course covers advanced topics of OpenFOAM and is
designed to enable the participants to use OpenFOAM effectively on
real engineering problems and develop the toolbox to suit their
needs. It covers general use and programming of OpenFOAM, building
on topics presented earlier in the Foundation Course. It provides a
foundation for all aspects of OpenFOAM, from running cases to programming, so
is useful to both new users and existing users wishing to broaden their
knowledge of OpenFOAM.
-
AxCYCLE Workshop Online Course
Course, United States, May 9, 2017 This online training workshop provides participants with
an understanding of the design, analysis and optimization
of thermodynamic cycles using AxCYCLE ™.
-
ESI OpenFOAM Foundation Course
Course, 350 Sparks Street Suite 220, Ottawa, Canada, May 9, 2017 This course introduces the open source CFD toolbox,
OpenFOAM. It provides a foundation for all aspects of
OpenFOAM, from running cases to programming, so is useful
to both new users and existing users wishing to broaden
their basic knowledge of OpenFOAM.
-
15th INTERNATIONAL ICING COURSE
Course, 410 Sherbrooke Street West, Montreal, Canada, May 8, 2017 This course illustrates the state-of-the-art of CFD
applications in
icing
simulations and links theory to application. It is
structured to be of
equal
interest to aerodynamicists, icing, environmental systems
and flight
simulation engineers, regulators and Designated Engineering
Representatives.
-
Internal Combustion Engine Modeling in CONVERGE
Course, 21500 Haggerty Rd., Detroit, United States, May 3, 2017 This two-day course offers an introduction to CONVERGE for
internal
combustion (IC) engine modeling. You will learn about the
CONVERGE solver
and modeling options while working through a typical IC
engine case from start
to finish. Because CONVERGE has a completely automated
meshing process,
you do not need to spend any time preparing the volume mesh,
which simplifies
the case setup process.
-
One Month course on Advanced CFD analysis from 01-May-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, May 1, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Web Seminar: Fans 101
Online Event, April 27, 2017 Fans are common in many electronics cooling applications
though it may not be well understood why a particular fan
type might be better in a particular design. In this
presentation we will discuss how experimental fan
measurement is obtained and integrated into a CFD model.
-
The Engineering Simulation Show 2017
Conference, Roundhouse, Derby, United Kingdom, April 26, 2017 The Engineering Simulation Show 2017 brings together the
foremost products and from across the global engineering
industry.
-
SOWE 2017 - The Fifth Symposium on OpenFOAM in Wind Energy
Conference, ADItech Headquarters, Pamplona, Spain, April 26, 2017 The Fifth Symposium on OpenFOAM® in Wind Energy (SOWE 2017)
is hosted by the Department of Wind Energy at CENER
(National Renewable Energy Centre of Spain). As in the
previous editions, the symposium offers a space to share the
latest developments based on OpenFOAM® for Wind Energy
applications. The symposium brings together experts,
beginners, developers and final end users to discuss the
research results and techniques to solve the new demands of
the Wind Energy sector.
-
Online Training Program on Computational Fluid Dynamics (CFD) with OpenFOAM
Course, Department of Mechanical Engineering, Visvesvaraya National Ins, NAGPUR, India, April 24, 2017 This training gives the platform to the participant to
understand OpenFOAM for basic to advanced to programming
level.
-
VKI Lecture Series: Turbulent Combustion
Conference, Waterloosesteenweg 72, 1640 Sint-Genesius-Rode, Belgium, April 24, 2017 The objective of this biannual Lecture Series on Turbulent
Combustion is to present the state-of-the-art review of
on-going activities in turbulent combustion and to outline
current research directions.
-
Mixing In Stirred Tanks - A One Day Live Training Course - Frankfurt, Germany, April 20, 2017 - Attendees- MixIT Licence Free
Course, New Horizons, Frankfurt, Germany, April 20, 2017 This course is designed for chemists and chemical
engineers to learn or review mixing calculations and
scale up methods. Subsequently, this will provide an
opportunity for immediate practical application.
-
Simulation Based Characterization: A 3D to 1D System Level Thermo-Fluid CFD Workflow
Online Event, April 20, 2017 Learn how FloEFD can be used to characterise complex
multi-arm geometries for use in FloMASTER thermos-fluids
simulations.
-
One Month course on Advanced CFD analysis from 15-April-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 15, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Rotor Dynamics and Bearing Design Online Course
Course, United States, April 11, 2017 This course provides education by covering everything
from basic definitions and the role of rotor dynamics in
machines to lateral and torsional analyses as well as
rotor balancing.
-
Using CFD for ship design evaluation and optimization
Online Event, April 11, 2017 This webinar will examine an automated system which
allows CFD simulations to run faster. It's also used in
performing hull form optimization where the CFD tool is
coupled with a parametric design tool, allowing for
hundreds of simulations a day to be run on an HPC
cluster, resulting in highly improved hull forms in a
matter of days. Check it out and sign up for this free
online event!
-
Advanced Simulation to Solve and Optimize Process Development Problems
Workshop, Courtyard Boston Cambridge, Cambridge, United States, April 11, 2017 If you are an engineer or a manager who wants to optimize
current processes in ways it was never possible before,
this event will help you understand the applicability of
deploying simulation to achieve these objectives.
If you are already using CFD in your engineering
workflow, this session will demonstrate that it is not a
single point simulation but rather the ability to rapidly
and intelligently explore a host of designs and processes
that bring the most value from simulation.
-
FLOW-3D Workshop for Water & Environmental Flows
Conference, Marriott Anaheim, Anaheim, United States, April 6, 2017 In this CFD workshop that will take place on Thursday, April
6 at the Marriott Anaheim in Anaheim, CA, Flow Science
Senior CFD Engineer, John Wendelbo, will introduce water &
environmental simulation workflows using FLOW-3D.
-
One-week Course on Aerodynamics & Hydrodynamics in Sports (CAHS-2017)
Course, Motilal Nehru National Institute of Technology (MNNIT), Allahabad, India, April 3, 2017 This course is one of its kind in India, which will be
taught by Prof. Firoz Alam of RMIT University, Melbourne
(Australia). Five days of the certificate course includes
classroom teaching followed by Tutorials and discussions.
UG and PG Students, Research scholars, Faculty
members, Practicing Engineers, Scientists, Sports
personnel, Sports trainers and Sports enthusiastic would
be benefited from the course.
-
One Month course on Advanced CFD analysis from 01-April-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 1, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Web Seminar: Power Electronics Cooling Calculations at Room Level
Online Event, March 29, 2017 This presentation will demonstrate 3D-CFD flow calculations
with FloEFD for the analysis of a power electronics cabinet
with electrical components.
-
Applications of Advanced Computational Methods in Engineering 28-29th March, 2017
Workshop, Birla Institute of Technology and Science Pilani Pilani Campus, Jhujhunu, Rajsathan, India, March 28, 2017 The Department of Mechanical Engineering, BITS-Pilani,
Pilani Campus, is conducting a two day Workshop on
Applications of Advanced Computational Methods in
Engineering during March 28-29, 2017. The objective of
the workshop is to equip participants with skills
required in advanced computational techniques
particularly in the areas of computational fluid
dynamics, and computational materials science.
-
CFD for Atmospheric Flows and Wind Engineering
Conference, Waterloosesteenweg 72, 1640 Sint-Genesius-Rode, Belgium, March 27, 2017 The present course offers a wide overview of the
state-of-the-art of the domain, considering the application
to both small and mesoscale range. Reynolds Averaging (RANS)
and large-eddy (LES) approaches are discussed and their
respective capabilities for different classes of flows axes
are evaluated. The discussion is completed by the
presentation of examples of practical implementation and
applications using Open Source Codes as well as in-house and
commercial software.
-
Design of a Waste Heat Recovery System 5-Day Training
Course, Boston, United States, March 27, 2017 The objective of this course is to provide participants
theoretical and practical training on designing waste
heat recovery systems for improving energy efficiency in
existing and new energy intensive systems.
-
Distance Learning Course in DSMC.
Course, United Kingdom, March 27, 2017 A Distance Learning Course in the Direct Simulation Monte
Carlo (DSMC) method.
-
Sunday batch of course on Advanced CFD analsysi from 26-March-2017
Course, Niharika Institute of Computational Engineering, HAL 3rd stage,, Bangalore, India, March 26, 2017 Classes by Mr.Rudresh Ganganna,Former Scientist-ISRO.
Theory +live problems using Ansys Fluent,CFX and ICEMCFD Hexa.
-
AxSTREAM NET Online Course
Course, United States, March 21, 2017 The goal of this 4 day online course is to teach attendees
how to successfully use AxSTREAM NET™
-
CFDEM® Training
Course, Industriezeile 35, Linz, Austria, March 20, 2017 Intense hands-on-trainings - if you want to learn how to
fully harness the power of open source DEM and CFD-DEM
simulations, visit our short courses and get crucial
knowlegde directly from our developers!
LIGGGHTS® Open Source DEM Engine
CFDEM®coupling CFD-DEM Engine
CFDEM®Workbench for LIGGGHTS®
-
Computational Science Symposium
Conference, Dept. CDS, IISc, Bangalore, India, March 16, 2017 The central theme of this symposium is on the development of
accurate
numerical schemes for solving differential equations, of
analysis and
robust numerical algorithms including efficient parallel
algorithms for
high performance computing.
More than 20 invited plenary speakers (academia/industry)
and several
contributed talks are planned.
-
OpenFOAM Advanced Course
Course, 25 Burlington Mall Road 2nd Floor, Burlington, United States, March 16, 2017 This course covers advanced topics of OpenFOAM and is
designed to enable the participants
to use OpenFOAM effectively on real engineering problems and
develop the toolbox to suit
their needs. It covers general use and programming of
OpenFOAM, building on topics
presented earlier in the Foundation Course. It provides a
foundation for all aspects of
OpenFOAM, from running cases to programming, so is useful to
both new users and existing
users wishing to broaden their knowledge of OpenFOAM.
-
Improving the Efficiency of Hydro Turbines with 3D CFD
Online Event, March 16, 2017 In this webinar see how 3D computational fluid dynamics
(CFD) simulation technology has been used to accurately
assess the efficiency of a Francis hydro turbine.
Simulation results will be compared to experimental
results for a realistic, full-scale, non-proprietary
hydro turbine model made available as part of the
Francis-99 workshop series hosted by the Norwegian
Hydropower Centre.
-
ERCOFTAC- Oil, Gas and Petroleum: Modelling and Simulation
Seminar, Frazer Nash Consulting, Dorking, United Kingdom, March 15, 2017 Aims - to capture latest modelling and
simulation practices and issues surrounding network
digitisation, in order to understand how best can we serve
the sector with the latest technologies, leading to
operational excellence, where oil prices remain much lower
than their 2014 highs, but in a more stable price plateaux,
that allows producers and solution providers a viable
business environment.More detail to
follow shortly..
-
One Month course on Advanced CFD analysis from 15-March-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 15, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
OpenFOAM Foundation Course
Course, 25 Burlington Mall Road 2nd Floor, Burlington, United States, March 14, 2017 This course introduces the open source CFD toolbox, OpenFOAM.
It provides a foundation for all aspects of OpenFOAM, from
running cases to programming, so is useful to both new users
and existing users wishing to broaden their basic knowledge
of OpenFOAM.
-
AxCYCLE Workshop
Course, Switzerland, March 13, 2017 This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™
-
FloTHERM XT V3.0 - What's New
Online Event, March 9, 2017 Learn the new features providing added benefits to FloTHERM XT.
-
AxSTREAM Workshop - 3 Day Training
Conference, Boston, United States, March 8, 2017 This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
Lattice Boltzmann Methods with OpenLB Software Lab
Conference, Tunisia, March 6, 2017 The spring school introduces scientists and applicants from
industry to the
theory of LBM and trains them on practical problems. The
first three days are
dedicated to the theoretical fundamentals of LBM up to
ongoing research on
selected topics. Followed by two days of mentored training
on case studies using
OpenLB, the participants gain deep inside into LBM and its
applications.
-
Axial Turbine Design 5-Day Training
Course, Bangalore, India, March 6, 2017 The goal of this course is to provide engineers with a
better understanding of steam and gas turbines and help
them find new, more accurate, cost-saving solutions
through successful axial turbine design and operation
tasks.
-
Advanced microfluidic flow modeling using FLOW-3D
Online Event, March 2, 2017 The CFD software FLOW-3D offers a unique blend of both free
surface and internal flow modeling capabilities coupled with
advanced multiphysics features that are particularly well
suited to micro-scale fluid flow applications. This
technical webinar will focus on presenting a broad overview
of FLOW-3D’s modeling capabilities as applied to
microfluidics, and will include an emphasis on particle
sorting applications, including advanced electro, magneto
and acousto-phoresis topics.
-
One Month course on Advanced CFD analysis from 01-March-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 1, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
IGBT Cold Plate Optimization
Online Event, March 1, 2017 Discover several ways to optimize an IGBT cold plate in
FloEFD and with additional information on the external
pSeven optimizer platform.
-
FloEFD v.15 - What's New
Online Event, February 23, 2017 See what’s new in FloEFD v16
-
AxCYCLE Workshop
Course, Boston, United States, February 22, 2017 This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™
-
OpenFOAM Stammtisch User Meeting
User Conference, Universität Kassel, Campus Center, Moritzstrasse 18, Kassel, Germany, Germany, February 20, 2017 European users gather to exchange experiences in the use of
OpenFOAM technology.
-
One Month course on Advanced CFD analysis from 15-February-2017 (Morning and Evening batch)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 15, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Sunday batch :Course on Advanced CFD analysis from 12-February-2017 (10:30 Am to 6 PM, 12 Sundays)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 12, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Water Resources: a comprehensive review of FLOW-3D’s modeling capabilities
Online Event, February 9, 2017 Following a series of webinars that have focused on various
aspects of civil infrastructure and environmental flow
modeling, this presentation will offer a comprehensive
review of the modeling options that are currently available
to water resource engineers using the CFD tool FLOW-3D.
-
Designing a 1,000mph car - the use of CFD
Seminar, Oxford e-Research Centre, 7 Keble Road, Oxford, United Kingdom, February 9, 2017 The BLOODHOUND Supersonic Car is set to take the Land Speed
Record into a whole new era. The team plans to take a manned
vehicle to 1000mph by 2018, increasing the current Land
Speed Record (763mph) by over 30%.
This target presents the Bloodhound CFD team with massive
scientific and engineering challenges.
Dr Ben Evans of the University of Swansea will talk
about the aerodynamics of the Bloodhound SSC project and
discuss the extreme challenges of designing a car to
reach 1000mph.
-
AxSTREAM 3 Day Workshop
Course, Boston, United States, February 8, 2017 his training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
AxSTREAM 3 Day Workshop
Course, Zug, Switzerland, February 8, 2017 This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
Radial Compressor Design and Optimization
Course, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, February 6, 2017 The short course provides an overview of the present
knowledge and flow models and intends to provide a good
background for the people interested in the aerodynamic
design of radial compressors.
-
One Month course on Advanced CFD analysis from 01-February-2017 (Morning and Evening batch)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 1, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Rotor Dynamics and Bearing Design
Course, Zug, Switzerland, February 1, 2017 This course covers rotor dynamics analysis and bearings
simulation for different types of rotors and bearings
(journal, gas, rolling elements). Rotor dynamics
fundamentals, basic design rules and analyses according
API and other standards, bearing simulation aspects and
more are explained.understanding of the design, analysis
and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
Webinar: Design of High Efficiency Compressors with Low GWP Refrigerants
Online Event, February 1, 2017 Register to see how the different modules of TURBOdesign
Suite can be used to develop high efficiency compressors
for new refrigerants with low Global Warming Potential
(GWP).
-
FloMASTER v8.0 - Industrial Fluid System Simulation
Online Event, February 1, 2017 The eagerly anticipated Version 8.0 of FloMASTER is now
available and you have the opportunity to see how you can
benefit in your design process in this new live web seminar.
-
Industry oriented course on CFD analysis (Ansys Fluent, Ansys CFX, Ansys ICEMCFD-Hexa).
Online Event, February 1, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Live Webinar - Get to know FieldView 16.1
Online Event, February 1, 2017 Register now for your chance to get to know the new
FieldView 16.1 update in a live webinar with Yves-Marie
Lefebvre, our FieldView Product Chief. Demonstration and
exploration of the features our customers asked for and
how they will help all CFD users be more productive.
-
Live Webinar - Get to know FieldView 16.1
Online Event, January 31, 2017 Register now for your chance to get to know the new
FieldView 16.1 update in a live webinar with Yves-Marie
Lefebvre, our FieldView Product Chief. Demonstration and
exploration of the features our customers asked for and
how they will help all CFD users be more productive.
-
Second CFD Workshop at UTM, Malaysia
Workshop, HiREF Laboratory, Faculty of Mechanical, UTM, Skudai, Malaysia, January 30, 2017 A comprehensive course and workshop on CFD
held at Malaysia's premier university of
technology, UTM
-
AxSTREAM 3 Day Workshop
Course, Boston, United States, January 25, 2017 This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
FloTHERM XT: Compressing the Thermal Design Process
Online Event, January 25, 2017 Incorporating FloTHERM XT into your work flow can reduce
your design process time by a factor of at least 2 when
compared to traditional general-purpose simulation products.
A thermal design using the BeagleBone Black board will be
used to demonstrate FloTHERM XT's CAD-centric approach.
-
Flowing Matter 2017
Conference, Faculty of Engineering, University of Porto, Porto, Portugal, January 23, 2017 This conference will serve as an important event to get the
three scientific communities involved in the COST Action
MP1305 closer to each other: complex fluids (suspensions,
granular materials, glasses, rheology), active matter
(biological and
synthetic micro-swimmers, bird flocks, insect swarms), and
complex flows (turbulence, chaotic flows). The ultimate goal
is to
stimulate the interaction between these three scientific
communities working on Flowing Matter.
-
Advanced Methods in Computational Fluid Dynamics
Course, George Begg Building, School of MACE, University of Manchester, Manchester, United Kingdom, January 23, 2017 This four (04) day course will address the analysis of
modern approaches to turbulence modelling, different models
and their applications to the solution of industrial
problems including external and internal aerodynamics, heat
transfer, combustion, aero-acoustics, Lattice Boltzmann
Method, Smooth Particle Hydrodynamics (SPH), waves and tidal
energy extraction modelling. The course also induces two
(02) days of practical training on edf’s open source CFD
solver Code_Saturne.
-
Multi-scale methods for non-reacting and reacting flow simulations
Course, Université Libre de Bruxelles, Solbosch Campus, Bruxelles, Belgium, January 23, 2017 The focus of the school is on bridging scales in modelling
and simulation of
reacting and non-reacting flows.
Programme and school details are available at the website
http://francquichair.wixsite.com/course
-
Introduction to Computational Fluid Dynamics
Conference, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, January 23, 2017 The objective of these lecture series on "Introduction to
CFD" is to provide an elementary tutorial presentation on
computational fluid dynamics (CFD), emphasizing the
fundamentals and surveying a variety of solution techniques
whose applications range from low speed incompressible flow
to hypersonic flow.
-
Axial Turbine Design 5-Day Training
Course, Boston, United States, January 23, 2017 The goal of this course is to provide engineers with a
better understanding of steam and gas turbines and help
them find new, more accurate, cost-saving solutions
through successful axial turbine design and operation
tasks.
-
Sunday batch :Course on Advanced CFD analysis from 22-January-2017 (10:30 Am to 6 PM, 12 Sundays)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 22, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
AxCYCLE Workshop
Course, 1500 District Avenue, Burlington, United States, January 18, 2017 This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™.
-
Motorsports Heat Exchanger Optimization
Online Event, January 18, 2017 Join this event to watch how to optimize the design of an F1
sidepod heat exchanger.
-
One Month course on Advanced CFD analysis from 15-January-2017 (Morning and Evening batch)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 15, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
International Bhurban Conference on Applied Sciences and Technology (IBCAST)
Conference, National Centre for Physics (NCP), Quaid-i-Azam University, Islamabad, Pakistan, January 10, 2017 Starting from the year 2002, the IBCAST is being held
consecutively for over a decade. Until the year 2005,
four technological areas namely; Advanced Materials,
Control Engineering, Computational Fluid Dynamics and
Wireless Communication & Radar were covered. Later, four
more research areas - Biomedical Sciences, Cyber
Security, Medical Sciences and Underwater Technologies
were included. In 2015, another research area
Aerostructures was also included in the conference.
-
AxSTREAM 3 Day Workshop
Course, Bangalore, India, January 4, 2017 This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
One Month course on Advanced CFD analysis from 02-January-2017 (Morning and Evening batch)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 2, 2017 Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Axial & Centrifugal Pumps Fundamentals
Course, Bangalore, India, January 2, 2017 This course will lay the groundwork required for all
engineers who are involved in design, optimization and
operation of pumps.
-
fast Track Batch on CFD with OpenFOAM
Course, Chinchwad, Pune, India, January 1, 2017 This course is for you, if you are:
New to OpenFOAM || You have partial training in OpenFOAM ||
Want to develop proficiency in CFD / OpenFOAM || Want to
simplify the use of OpenFOAM || PG Student, Research
Scholar, starting career in CFD || R&D person either in
industry / lab etc
-
Free Webinar: XFlow Aeroacoustics the Analysis of the LAGOON Landing Gear
Conference, Algeria, January 1, 2017 Join this Free XFlow Webinar about the Aeroacoustics the
Analysis of the LAGOON Landing Gear next March 23rd 2017 at
5:00 pm CET:
https://attendee.gotowebinar.com/register/7225586178773928194
-
ADT | Global TURBOdesign Symposium 2017
Conference, Holiday Inn Bloomsbury, London, United Kingdom, January 1, 2017 Global TURBOdesign Symposium, 6th & 7th November 2017!
http://bit.ly/2sXr1Y8
The event will bring together users from customers,
partners, and
designers interested in the unique capabilities of 3D
inverse design
technology applied to the design and optimization of
turbomachinery
components highlight, in hands-on presentations, their
best
practices, challenges, and achievements.
-
Product Design and Innovation using CFD and FEM
Workshop, IIT (B.H.U), Mechanical Engineering Department, Varanasi, India, December 27, 2016 Engineers, graduate students including masters and PhD
students study lots of theory on Computer Aided Engineering
(CAE), specially on Finite Element Method (FEM) and
Computational Fluid Dynamics (CFD) but when comes to the
application of theory. This short course would help Industry
Engineers and
Designers, Academic Institutions Faculty, Post Graduate and
Research
students in designs based on 21st Century Approach
“Simulation Based Engineering Approach".
-
Twelfth International Conference of Fluid Dynamics (ICFD12)
Conference, Le Méridien Pyramids Hotel , Cairo, Egypt, December 19, 2016 The goals of the conference are to provide a forum for the
development of experimental and computational methods and
tools, to foster cross-fertilization among different fields
of application, and most notably to enable communication
between the scientists and researchers who build the theory
and applicants who use it in fluid dynamics. The conference
program will consist of presentations on subjects ranging
from basic science reach to solid applications.
-
3rd International Conference on Computational Methods in Engineering and Health Sciences , Dec 2016, Japan
Conference, Tobata Campus, Kyushu Institute of Technology, Kitakyushu, Japan, December 17, 2016 Two day International Conference on Computational Methods in
Engineering and Health Sciences (ICCMEH-2016) serves the
purpose of bringing together the computational scientists and
engineers and medical fraternity from various
interdisciplinary domains under a common forum. The theme of
this conference will be broad covering several analytical and
numerical techniques, and novel applications of computational
techniques to solve problems in engineering, health sciences
disciplines
-
6th International & 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016)
Conference, Department of Applied Mechanics, Allahabad, India, December 15, 2016 FMFP is the most important conferences in the area of
Fluid Mechanics and Fluid Power in India organised at one
of the premier institutions of India every year under the
aegis of the National Society of Fluid Mechanics and
Fluid Power.
-
What’s New in FLOW-3D v11.2
Online Event, December 15, 2016 Please join Flow Science engineers for a webinar where they
will discuss the latest developments in FLOW-3D v11.2.
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-December-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 4 hours per day , Lab/practical training 4 hours
per
day.
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-December-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Evening batch for working professionals: 5: 30 Pm onwards
Morning batch from : 10:30 AM onwards
-
Best practices for forced and natural convection cooling simulations
Online Event, December 15, 2016 Basic sizing calculations, as well as the detailed
simulation steps, will be covered to best equip the
thermal engineer to effectively use simulation to aid and
guide the demanding task of reliable system design.
-
Simulating Vehicle HVAC Systems
Workshop, Doubletree Suites Chicago-Downers Grove, Downers Grove, United States, December 15, 2016 This workshop will showcase various software tools,
models, and coupling techniques used by today’s engineers
to achieve better design, faster. Ranging from fast and
efficient CFD "pre-thru post-processing" in STAR-CCM+®
software, to more advanced modeling such as de-ice/defog
and cabin heatup/cool down simulation. You will also
learn about 1D-3D system simulation coupling, as well as
the exciting possibilities design
exploration/optimization can bring to the design process.
-
Automotive Lighting - A Spotlight on Solar Radiation
Online Event, December 14, 2016 This web seminar will focus on the simulation of solar
radiation and its impact on hot spots and resulting maximum
temperatures.
-
How to add CFD into a fluid mechanics course
Online Event, December 13, 2016 Penn State professor John M. Cimbala, co-author of Fluid
Mechanics: Fundamentals and Applications, will
demonstrate how tutorial materials and videos can be
combined with engineering simulation software to increase
the understanding of basic CFD concepts while also
enhancing students’ knowledge about fluid flow. Using
class-tested materials and homework samples, Professor
Cimbala will highlight proven teaching methods to prepare
students for basic CFD modeling.
-
Hands-on Workshop on Computational Fluid Dynamics
Workshop, DEE, National Institute of Technology, Tiruchirappalli, India, December 12, 2016 This course will provide core knowledge on the
fundamentals of CFD for engineers, and an introduction to
the methods and analysis techniques used in CFD.
• It also provides an introduction to the use of
commercial
CFD codes to analyze internal and external flow heat
transfer, multiphase and combustion problems of practical
engineering interest.
-
10days certificate course on "Hydrodynamic stability and dynamo theory"
Course, National Institute of Technology, warangal, warangal, India, December 9, 2016 During the course the following topics will be covered
Foundations of Magnetohydrodynamics, Dynamics of Rotating
Fluids, Numerical Simulations of Dynamos and Natural Dynamos.
-
Admixtus is the time and cost saving solution for mixing engineers
Online Event, December 9, 2016 Attendees of this webinar will learn the basics of
performing a mixing simulation with Admixtus. A
demonstration by a technical expert will show the ease of
setting up such a simulation.
-
Computational Fluid Dynamics (CFD) with OpenFOAM
Course, Department of Mechanical Engineering, VNIT, Nagpur, India, December 8, 2016 The objective of the present training program is to
appreciate the open source CFD code OpenFOAM and simplify
OpenFOAM use. This training gives a platform to the
participant to understand OpenFOAM from basics to advanced
to programming level.
-
HPDC Webinar Series: Part III - Cooling & Solidification
Online Event, December 8, 2016 In Part III of our High Pressure Die Casting webinar series,
we will explore cooling and solidification simulations.
-
Web Seminar: ECS & Ducted Air Systems CFD Simulation - Modeling Complex System Interactions
Online Event, December 7, 2016 Modeling sub-system interactions of a full aerospace
aircraft management system during operation using
Thermo-fluid 1D-CFD simulation.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, December 1, 2016 Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
Classes - about 5 hours perday (Theory +
practicals).Theory most probably from 5 PM to 7 PM
(Monday to saturday)
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-December-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Evening batch for working professionals: 5: 30 Pm onwards
Morning batch from : 10:30 AM onwards
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-December-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 4 hours per day , Lab/practical training 4 hours
per
day.
-
LES4ICE'16
Conference, Rueil-Malmaison (near Paris), France, November 30, 2016 Large-Eddy Simulation for Internal Combustion Engines 2016
-
CFD Day – Simulation Makes the Difference
Seminar, Via Luigi Beccali, 4, MIlan, Italy, November 30, 2016 Free seminar in Milan, Italy. It is the first event in Italy
fully dedicated to CFD techniques and methodologies for
industry.
|