-
FREE webinar on 'Vibro-acoustic analysis of a centrifugal water pump', January 17, 2013
Online Event, January 17, 2013 Wish to learn more about noise emissions from industrial
machines? Join NUMECA for this free webinar focused on the
vibro-acoustic analysis of a water pump.
-
Online course on "CFD and Aerospace Engineering"
Online Event, January 15, 2013 Online course offered by Niharika Institute of Computational
Engineering,Bangalore.
Limited number of seats.Syllabus available in www.nicecfd.com
-
Educational Webinar: Modeling Multiphase Flows Using STAR-CCM+
Online Event, January 1, 2013 Please join us on January 17th for an educational webinar on
multiphase flows. The event will discuss the differences
between the two categories of flow: stratified flows (e.g.
free surface flows) and dispersed flows (e.g. bubbly,
droplet and particle flows).
-
International Conference on Mechanical, Automotive and Aerospace Engineering 2013
Conference, Kuala Lumpur, Malaysia, January 1, 2013 The Faculty of Engineering,
International Islamic University
Malaysia is organizing this
International Conference on
Mechanical, Automotive and
Aerospace Engineering to bring
together researchers and
engineering professionals from
all
over the globe to meet and
deliberate in the beautiful
green city of Kuala Lumpur,
during the period July 2-4,
2013.
-
ASSE-MEC 11th Professional Development Conference and Exhibition
Conference, Manama - Bahrain, Saudi Arabia, January 1, 2013 American Society of Safety Engineer Safety, Health and
Environemtal conference in the Middle East
-
One Month Crash course titled "Industry Oriented course on CFD and Aerospace Engineering"
Course, MES English School,Near Havanoor circle,Basaveshwar Nagar, Bangalore, India, December 29, 2012 Niharika Institute of Computational Engineering
( www.nicecfd.com) offers one Month crash course on CFD at
Bangalore during December 2012 and January 2013.
Course duration: 75 Hours. Classes on all 7 days of the
week( evening 6 to 9 PM).
Registration open. Visit our website www.nicecfd.com for
detailed syllabus.
-
2012 International Conference on Mechatronics and Computational Mechanics(ICMCM 2012)
Conference, Dubai, United Arab Emirates, December 20, 2012 2012 International Conference on Mechatronics and
Computational Mechanics (TTP Official Conference
ID:622),which is being organized and will be held on 20-
21st December, 2012 in Dubai, UAE. All accepted papers
will be published in "Applied Mechanics and Materials"
[ISSN:1660-9336],which is indexed by SCOPUS, Ei Compendex
(CPX), CSA, CA , Google and Google Scholar, ISTP, IEE.
-
LearnCAx' Industry Focused CFD Training
Course, 1 Akshay Residency, Aundh, India, December 15, 2012 A course with perfect blend of theory & software knowledge
in order to understand fundamentals of computational
uid dynamics and develop skills using ICEM CFD and ANSYS
Fluent softwares.
Ideal For:
+ Engineering Graduates and Post-Graduates (B.E / B.Tech /
M.E. / M. Tech in Aerospace,
Automobile, Mechanical, Industrial Production, Chemical,
Petro-chemical, Bio-chemical and Bio-medical).
-
Engineering Workshop: Computational Fluid Dynamics (CFD) for the CPI and Pharmaceutical Industry
Workshop, Boston Marriott Quincy, 1000 Marriott Drive, Quincy, United States, December 14, 2012 This event will give process R & D engineers, process
development engineers, and plant engineers a better
understanding of how companies are successfully using
engineering simulation to save expensive experiments, reduce
time-to-market of new products, and evaluate the safety and
performance of new conceptual designs.
-
Introduction to CFX
Course, Airport House, Purley Way, Croydon, United Kingdom, December 12, 2012 This course is designed for those interested in the
analysis of fluid motion. Basic knowledge of the ANSYS
interface is beneficial but not required. Prior knowledge
of fluid mechanics and general FE modelling is particularly
useful.
Each course topic is followed by hands on workshops and
exercises
-
FREE webinar on 'Introduction to the nonlinear harmonic method NLH of FINE/Turbo'
Online Event, December 12, 2012 NUMECA is hosting a FREE webinar on December 12
-
Web Seminar: Vehicle Thermal Management System Performance Modeling with System Level Fluid Simulation
Online Event, December 12, 2012 Presentation on using 1D fluid dynamics for modeling
vehicle thermal management systems using Flowmaster
simulation software – includes flow and heat transfer
prediction in IC and hybrid electric vehicle cooling
circuits (featuring heat exchangers, piping, thermostat
valves ) and details both pressure drop calculations and
Transient thermal analysis for drive cycle performance
analysis. Also looks at how 1D fluid simulation can be
enhanced with 3D Computational fluid dynamics studies.
-
Engineering Workshop: Computational Fluid Dynamics (CFD) for the CPI and Pharmaceutical Industry
Workshop, Essex Technology Group, 201 W. Passaic ST, Rochelle Park, United States, December 12, 2012 This event will give process R & D engineers, process
development engineers, and plant engineers a better
understanding of how companies are successfully using
engineering simulation to save expensive experiments, reduce
time-to-market of new products, and evaluate the safety and
performance of new conceptual designs.
-
Engineering Workshop: Computational Fluid Dynamics (CFD) for the CPI and Pharmaceutical Industry
Workshop, Courtyard Newark-Univ. of Delaware, 400 David Hollowell DR, Newark, United States, December 11, 2012 This event will give process R & D engineers, process
development engineers, and plant engineers a better
understanding of how companies are successfully using
engineering simulation to save expensive experiments, reduce
time-to-market of new products, and evaluate the safety and
performance of new conceptual designs.
-
Engineering Workshop: Future Trends in Battery Systems Modeling
Workshop, Newport Beach Marriott Hotel & Spa, 900 Newport Center Drive, Newport Beach, United States, December 11, 2012 This workshop will cover the many ways engineers are now
engaged in the design and simulation of lithium-ion batteries.
-
Ninth International Conference on Computational Fluid Dynamics in the Minerals and Process Industries
Conference, Melbourne Convention and Exhibition Centre, Melbourne, Australia, December 10, 2012 CSIRO is organizing CFD2012, which is being held in
Melbourne on 10-12 December 2012. The conference invites
papers on the application of CFD in the minerals processing,
metal production, power generation, chemicals and other
process industries. This year's conference also has
minisymposia running concurrently with general sessions on
the following topics: Computational Fluid Dynamics in
Bio-engineering; Renewable Energy Processes: Modelling and
Simulation; Modelling of Gas-Particle Flows.
-
ESI DACH Anwenderforum
User Conference, Fulda, Germany, December 10, 2012 Virtual Performance, Virtual Manufacturing, Virtual Reality
-
nek5000 second User and Development Meeting in Zurich, Switzerland
User Conference, Zurich , Switzerland, December 7, 2012 We are pleased to invite you to attend the second nek5000
User and Development Meeting, to be hosted by the
Aeorthermochemistry and Combustion Systems Laboratory (LAV)
at the Swiss Federal Institute of Technology (ETHZ) in
Zurich, Switzerland, on December 7-8, 2012.
-
Battery & Electrification Webinar: Innovations in Engineering Simulation for Today's Electric & Hybrid Vehicles
Online Event, December 6, 2012 This event will provide attendees the latest information on
engineering simulation technology impacting the development
of electric & hybrid vehicles. Presenters will also cover
applications in electric aircraft, satellite technology and
other alternative forms of transport.
-
Free Workshop: Application-Oriented CFD for Aerospace & Defense Using STAR-CCM+
Workshop, University of Alabama, Huntsville, United States, December 5, 2012 Please join us for this informative seminar on December 5th
and witness firsthand how flow and thermal simulation can
reduce development times and costs, and ultimately
facilitate innovation. Gain a greater understanding of how
CFD can be applied to your programs and learn more about
major new development advances, including the release of
overset grids.
-
CFD modeling using ANSYS ICEM-CFD & ANSYS FLUENT
Course, flat 1, Anand Park, Aundh, India, December 5, 2012 A course with perfect blend of theory & software knowledge
in order to understand fundamentals of computational
uid dynamics and develop skills using ICEM CFD and ANSYS
Fluent softwares.
-
NAFEMS Training Course - Introduction to CFD Analysis: Theory & Applications
Course, The Legacy Falcon Hotel, Stratford upon Avon, United Kingdom, December 4, 2012 The course offers excellent guidance on how to judge which
numerical approximations are acceptable and appropriate for
solving a wide range of practical problems. Of equal
importance is the manner in which results are interpreted.
Advice is provided which allows the correct decisions to be
taken, based on results which are known to be reliable.
-
Engineering Workshop: Understanding How Fluid-Structure Interaction (FSI) Simulation Can Work For You
Workshop, Computational Dynamics, Ltd. , London, United Kingdom, November 30, 2012 Our seminar will detail how customers can benefit from
seamless, easy-to-use and robust fluid-structure interaction
solutions with STAR-CCM+ as well as how they link leading
FEA tools such as SIMULIA’s Abaqus.
-
Reminder: LES4ICE'12 call for papers open
Conference, Rueil-Malmaison (near Paris), France, November 29, 2012 LES4ICE'12, the international conference on LES for Internal
Combustion Engine Flows, will be held at IFP Energies
nouvelles, Rueil-Malmaison (near Paris, France) on 29 and 30
November 2012, within the framework of its Rencontres
Scientifiques.
We remind you that paper & poster abstracts can be submitted
until 30 March 2012.
All information can be found on the conference web-site.
-
Engineering Workshop: Understanding How Fluid-Structure Interaction (FSI) Simulation Can Work For You
Workshop, High Tech Campus, The Strip, Eindhoven, Netherlands, November 28, 2012 Our seminar will detail how customers can benefit from
seamless, easy-to-use and robust fluid-structure interaction
solutions with STAR-CCM+ as well as how they link leading
FEA tools such as SIMULIA’s Abaqus.
-
Engineering Workshop: Aerodynamics Developed in Formula One - Delivered to Formula Students
Workshop, Hochschule Esslingen - Campus Flandernstrasse, Esslingen am Neckar, Germany, November 28, 2012 Please join us for an update on new ways STAR-CCM+ is
improving vehicle aerodynamics. CFD specialists and guest
speakers will discuss how CD-adapco continues to push the
accuracy and process time boundaries of traditional
aerodynamics calculations. Workshop attendees will get a
firsthand look at how they can use the software to see the
best practices in preparation, meshing, and results on a
formula student car without any sacrifice in accuracy.
-
Engineering Workshop: Understanding How Fluid-Structure Interaction (FSI) Simulation Can Work For You
Workshop, Hotel Scandic Europa, Gothenburg, Sweden, November 27, 2012 Our seminar will detail how customers can benefit from
seamless, easy-to-use and robust fluid-structure interaction
solutions with STAR-CCM+ as well as how they link leading
FEA tools such as SIMULIA’s Abaqus.
-
2nd Australian OpenFOAM User Group Meeting - Melbourne
User Conference, The University of Melbourne, Australia, November 26, 2012 Applied CCM is pleased to announce
The 2nd Australian OpenFOAM Users Group meeting will be held
at The University of Melbourne on Monday 26 November, 2012.
-
4th International Conference on Computational Methods (ICCM2012)
Conference, Crowne Plaza, Gold Coast, Australia, November 25, 2012 The 4th International Conference on Computational Methods
(ICCM2012) will be held in Gold Coast, Australia from 25 to
27 November 2012. Gold Coast is a beautiful coastal city of
Australia located in South East Queensland, close to the
state capital Brisbane. Gold Coast is well known as a major
international tourist destination with its sunny subtropical
climate, beautiful beaches, canal and waterway systems, its
high-rise skyline, nightlife, and rainforest hinterland.
-
Materialise Innovation Course Aachen - from CAD to CFD
Course, Pauwelsstrasse 20, Aachen, Germany, November 22, 2012 Materialise is proud to announce that, in collaboration with
the renowned RWTH Aachen, we will be organizing a two day
Innovation Course, focused on cardiovascular applications!
Next to hands-on training sessions, you have the opportunity
to find out what innovations are going on nowadays in
cardiovascular research.
-
Experimental Fluid Mechanics 2012
Conference, Hradec Kralove, Czech Republic, November 20, 2012 The conference will focus on obtaining an overview of
projects under investigation, and experimental methods used
in the field of fluid mechanics and thermodynamics. Its aim
is to organize a network of young research workers who are
interested in experimental, and also theoretical, work in
the field of fluid mechanics and thermodynamics.
-
Engineering Workshop: Multiphysics Simulation for Marine Applications
Workshop, Royal National Lifeboat Institution, West Quay Road, Poole, United Kingdom, November 20, 2012 During this complimentary event, CFD experts will cover a
wide variety of naval issues and demonstrate a comprehensive
simulation including geometry import, model preparation,
configuration of the physics to post-processing, and reading
results.
-
Cold and Ultracold Molecules
Conference, Universitätszentrum Obergurgl, Gaisbergweg 5, 6456, Obergugl, Austria, November 18, 2012 It is the aim of this conference to bring together
scientists from these diverse fields, which are now
contributing to an increasing extent to developing new ideas
and approaches for the realization of cold and ultracold
molecular gases and to identifying new research directions
and applications of these novel systems.
-
Complimentary Webinar: CFD Methods in the Pharmaceutical Industry - Continuous Manufacturing for the API Process
Online Event, November 15, 2012 This event will teach attendees about the benefits of CFD
methods for continuous processes, and how it can shorten
product-process development cycles, optimize existing
processes, reduce energy requirements, and lead to the
efficient design of new products.
CFD specialists will speak on the developments in continuous
manufacturing for the API (Active Pharmaceutical Ingredient)
process and how the integration of CFD modeling and
simulation is emerging as a game changer.
-
FREE webinar on ' FINE/Marine: Propulsion modeling'
Online Event, November 14, 2012 NUMECA International is hosting a FREE webinar on November 14
(two sessions)
-
OpenFOAM Training course in Munich, Nov. 13-15, 2012
Course, Lipowskystr. 12, Munich, Germany, November 13, 2012 In this 2 days training you will learn about the basic
functionality of the software OpenFOAM. On the basis of
use-oriented samples you will realize the theory into
practical experience.
-
Individual Training OpenFOAM,Munich, Nov. 13 till 15, 2012
Course, Munich, Germany, November 13, 2012 OpenFOAM individual training organized by CFD+engineering
in Munich. The 2-day training (Nov.13 and 14, 2012) is
designed on the basis of use-oriented samples, from theory
into practical experience. Optional after the training an
additional day (Nov. 15, 2012) can be booked for an
individual training on your application or geometry.
-
Understanding How Fluid-Structure Interaction Simulation Can Work for You
Workshop, Marriott Houston Westchase, Houston, United States, November 13, 2012 Our seminar on November 13th will detail how customers can
benefit from seamless, easy-to-use and robust
fluid-structure interaction solutions with STAR-CCM+ as well
as how they link leading FEA tools such as SIMULIA’s Abaqus.
-
modeFRONTIER Workshop
Workshop, International Digital Lab, University of Warwick, Coventry, United Kingdom, November 8, 2012 Introductory Workshop to the Multidisciplinary Design
Optimisation and Process Integration Software modeFRONTIER.
-
Engineering Workshop: Getting the Full Potential Out of Simulation For Product Development Design Exploration and Optimization
Conference, Sheraton Detroit Novi, 21111 Haggerty Rd., Novi, United States, November 6, 2012 Attendees will learn how to maximize the value of their
compute clusters through a new approach to CAE software
licensing. The afternoon hands-on session will allow
attendees to use Optimate, a newly released product from
CD-adapco. Trainers will have attendees walk through the
complete design process.
-
Webinar de Engenharia: Automatização do processo de simulação de CAE/CFD
Online Event, November 6, 2012 Este evento proporcionará aos participantes uma avaliação
das novas opções de pré-processamento e uma percepção de
como gastar menos tempo na preparação tediosa e manual de
uma simulação numérica, e mais tempo analisando os
resultados finais do projeto.
-
I Conference of the Venezuelan Society of Fluid Mechanics 2012 (FLUIDOS2012)
Conference, Hotel HESPERIA Isla Margarita, Margarita, Venezuela, November 5, 2012 This workshop will bring together national and international
researchers focusing on fluid flow and its applications. The
objetive of the workshop is to provide a forum for
presentation of state-of-the-art research in both
theoretical and experimental fluid mechanics as well as
opportunities for interactions among the participants.
-
OpenFOAM Intermediate Training, Melbourne, Australia - October 2012
Course, Suite 30/150 Albert Road, South Melbourne, Australia, November 1, 2012 Participants in the course will learn the layout of the
OpenFOAM library, understanding of pressure-velocity
coupling (steady-state SIMPLE algorithm), how to copy and
compile a solver, add an equation to existing solver, add
source terms involving surface interpolation. In addition,
discretization best practice will be covered with a hands-on
example, introduction to C++ programming language, creation
of the new turbulence model as a part of the existing
OpenFOAM library with curvature correction.
-
Academic Track Event of STAR-Indian Conference
Conference, ITC- Gardenia , Bangalore, India, November 1, 2012 As a part of STAR-Indian Conference CD-adapco India is
organizing a dedicated one day academic event targeted at
students and faculty members working on CFD for diverse
applications in India.
-
2012 FLOW-3D Users Conference in Taiwan
User Conference, The Regent Taipei , Taipei, Taiwan, October 31, 2012 The 2012 FLOW-3D Users Conference will be held October 31,
2012 at The Regent Taipei in Taipei, Taiwan. For more
information, please contact hyperInfo.
-
An Investigation into UAV Avionics Cooling Using FloEFD
Online Event, October 31, 2012 See how FloEFD can be used to analyze avionics cooling for
UAVs. We will also talk briefly about the use of
Flowmaster for avionics cooling.
-
ERCOFTAC - COMPUTATIONAL AEROACOUSTICS
Course, GE , MUNICH, Germany, October 30, 2012 This course is intended for researchers in industry and in
academia including Ph.D. students with a good knowledge in
fluid mechanics, who would like to build up or widen their
knowledge in the field of aeroacoustics (modeling,
computational tools and industrial applications).
It will first provide a comprehensive overview of recent
insights of aeroacoustics theories (practical applications
of Lighthills analogy and vortex sound, Goldsteins analogy,
and coupling with instability waves).
-
ESI Energie Seminar
Seminar, Hamburg, Germany, October 30, 2012 CAE gestuetzte Entwicklung von Windkraftanlagen
-
Energy Seminar (German)
Seminar, MARITIM Hotel Reichshof Hamburg, Kirchenallee 34-36, 20099 Hamburg, Germany, October 30, 2012 CAE gestuetzte Entwicklung von Windkraftanlagen
-
2012 Automotive Simulation World Congress
Conference, Detroit Marriott at the Renaissance Center, Detroit, United States, October 30, 2012 2012 Automotive Simulation World Congress is being held Oct.
30-31 in Detroit. The two-day international event is
dedicated solely to the automotive industry: vehicles for
road, rail, racetrack and off-highway.
-
OpenFOAM Introductory Training, Melbourne, Australia - October 2012
Course, Suite 30/150 Albert Road, South Melbourne, Australia, October 30, 2012 The two day introductory training in OpenFOAM is designed to
enable CFD practitioners to start using OpenFOAM for
practical computations. The methodology employed consists of
a series of lectures that provide a general understanding of
OpenFOAM topics followed by hands-on work.
-
Webinar: ' HEXPRESS/Hybrid: Meshing solution for complex and unclean CAD geometries'
Online Event, October 30, 2012 Join NUMECA International for a FREE webinar on October 30.
-
2012 FLOW-3D Users Conference in Japan
User Conference, Tokyo International Forum, Tokyo, Japan, October 26, 2012 The 2012 FLOW-3D Users Conference in Japan will be held
October 26, 2012 at the Tokyo International Forum in Tokyo,
Japan. For more information, please contact Flow Science Japan.
-
Optimising HVAC for De-frost and De-mist
Online Event, October 25, 2012 With new interior designs, vehicles have more electronics
and thus more thermal events inside than ever before. How
can you guarantee your HVAC system will clear the glass from
frost or condensation in an acceptable time?
-
International CAE Conference 2012
Conference, Hotel Parchi del Garda, Verona province (Lake Garda), Italy, October 22, 2012 The International CAE Conference will present the state-of-
the-art of CAE in diverse industries. Significant user
testimonials will prove how such technologies help increase
the product efficiency and ROI. This annual appointment is
a major, an efficient platform for designers, analysts, IT
managers, engineers, professors, researchers, associations
and students involved or interested in virtual simulation
tools.
-
Industry oriented course on Computational Fluid Dynamics (CFD)
Course, Basaveshwar Nagar ,West of Chord Road, Bangalore, India, October 20, 2012 Niharika Institute of Computational Engineering,Bangalore
offers an Industry oriented course on CFD.The classes will
be held on Saturday and Sundays only.
The course is designed as per the Industry requirements.
The course covers theory of CFD and related subjects on
Aerospace Engineering.
The course is for fresh graduates and practicing Engineers.
For more details visit our website http://www.nicecfd.com
-
Foundation course on Aerospace Engineering
Course, Basaveshwar Nagar ,West of Chord Road, Bangalore, India, October 20, 2012 Niharika Institute,Bangalore offers an Industry oriented
foundation course on Aerospace Engineering.The classes will
be held on Saturday and Sundays only.The course covers the
important fluid mechanics related subjects of Aerospace
Engineering and Introduction to CFD.The course is designed
keeping in view non-aerospace graduates like Fresh
Mechanical Engineering students aspiring to begin a career
in Aerospace Industry.
For more details visit our website http://www.nicecfd.com
-
ESI Global Forum 2012
Conference, Sheraton San Diego Hotel & Marina, San Diego, United States, October 18, 2012 ESI Global Forum will bring together users from around the
world to share expertise, best practices, challenges and
successes in Virtual Product Engineering. In addition to
learning from simulation experts from around the world,
attendees will get a sneak peak at ESI's latest product
features and benefits, as well as practical tips and tricks.
-
Optimising Thermal Cabin Comfort
Online Event, October 18, 2012 Regulations on occupant comfort and temperature control are
causing manufacturers to consider the thermal management of
the cabin. How do you predict the thermal comfort of your
occupants, placing temperature sensors through the cabin?
Looking at airflows? This may be one way of doing it, but
these methods do not account for the shape of a person,
their clothing etc.
-
FREE webinar 'NUMECA CFD software for Hydropower Applications' on October 17
Online Event, October 17, 2012 NUMECA is hosting a FREE webinar on CFD software for
Hydropower Applications.
-
modeFRONTIER Workshop
Workshop, International Digital Lab, University of Warwick, Coventry, United Kingdom, October 16, 2012 Introductory Workshop to the Multidisciplinary Design
Optimisation and Process Integration Software modeFRONTIER.
-
OpenFOAM Seminar
Seminar, Hilton Garden Inn, Southfield, United States, October 16, 2012 ESI invites you to a complimentary OpenFOAM seminar during
which our experts, including some of the OpenFOAM founding
members, will share with you their knowledge and experience
of OpenFOAM.
-
Hand-Tied to Profitability - Conducting CFD During Product Development in a Tough Economy
Online Event, October 16, 2012 Computational Fluid Dynamics is at a crossroads where it is
more readily adopted yet is not a disruptive risk. Join us
for this webinar as Chad Jackson talks about this new
opportunity to change the equation for engineering.
-
11th Symposium on Overset Composite Grids and Solution Technology
Conference, Holiday Inn Dayton/Fairborn I-675, Fairborn, United States, October 15, 2012 This symposium brings together scientists,
engineers, mathematicians and students from industry,
government and academia to discuss overset
grid-related technologies as they are utilized to address
computational modeling and simulation issues in a wide
variety of industries. These overset-
grid technologies include, but are not limited to geometry
processing, mesh generation, grid connectivity, solution
algorithms for partial differential equations, and post-
processing.
-
ASME - EL513 - Introduction to Computational Fluid Dynamics
Online Event, October 15, 2012 This online course provides an introduction to the
scientific principles and practical engineering
applications of CFD. Although it provides an overview of
some of the fundamental mathematical equations governing
the fluid flow and heat transfer phenomena, its emphasis is
not to teach the theory behind the technology but to help
the participants apply the knowledge gained into practical
use of commercial CFD codes.
-
Webinar : A New Approach to Predicting Industrial Fan Noise in Heavy Vehicle
Online Event, October 11, 2012 Exa Corporation solutions for engineering simulation are
based on an extended Lattice Boltzmann method. This
inherently transient, numerically stable and patented
technology enables Exa to predict fluid flow with a level of
accuracy and insight into flow behaviour better than
physical testing or traditional computational fluid dynamics
(CFD) methods.
-
Technology Update On Battery Modeling Tools
Online Event, October 11, 2012 CD-adapco and Battery Design LLc first released their
innovative flow, thermal and electrochemistry simulation
tools 2 years ago, there has been significant product
development driven by customer feedback and a desire to
continue to lead this emerging field. This complimentary
online event will exam the benefits of these updates.
-
Webinar : A New Approach to Predicting Industrial Fan Noise for Civil Engineering
Online Event, October 11, 2012 Industrial fans, from domestic to large-scale commercial
models, all share a common issue, the noise generated by
the equipment. The acoustic effects of the housing and
adjacent duct work however cannot be ignored and can be
addressed quickly and accurately by using Exa software due
to its ability to handle complex geometry.
-
NUMECA International is hosting a FREE webinar on October 10: 'Introduction to VNoise - Aeroacoustic applications'
Online Event, October 10, 2012 This free webinar will show how the different VNoise
computational modules (i.e. FEM, BEM, FW-H and FlowNoise)
can be used to model typical turbomachinery applications as
well as sound generated by external/confined flows. The
attendees will gain a basic knowledge of the potentiality of
VNoise and the benefits achievable by its application.
-
Aerospace & Defense Luncheon
Dolce La Hulpe Hotel Chaussée de Bruxelles 135, La Hulpe, Belgium, October 9, 2012 The ANSYS Global Industry Director for Aerospace & Defence,
will be
visiting Europe at the beginning of October and more
specifically will be stopping in Belgium to meet and discuss
with the Aerospace & Defense Community not only about the
ANSYS current strategy and vision of the future for
Aerospace & Defense regarding simulations but also your own
points of view, issues, vision and to respond to your
questions.
To serve that purpose, we are organizing a lunch meeting
on 09/10/2012.
-
OpenFOAM user & advanced training in Prague
Course, Lisabonska 2394/4 , Prague, Czech Republic, October 8, 2012 OpenFOAM user & advanced training organised by CFD
support, s.r.o. will be held in Prague (Czech Republic) in
February 2012. http://www.cfdsupport.eu/training.php
-
CFD-driven Design and Analysis with SpaceClaim and SimericsMP
Online Event, October 3, 2012 SpaceClaim provides engineers flexibility in geometry prep
for simulation; SimericsMP enables unsurpassed ease and
accuracy of fluid and heat simulation for complex systems.
SpaceClaim and SimericsMP offer an integrated simulation
solution. See a live demo from CAD to simulation.
-
PLM Road Map 2012
Conference, The Inn at St. John's, Plymouth, United States, October 2, 2012 PLM Road Map is a strategic conference focused on the
critical trade-offs that shape product development. At PLM
Road Map 2012, find out first hand which issues are
confronting end users.
-
AutoGrid5 - Contra-Rotating Open-Rotors
Online Event, September 27, 2012
Providing multi-block structured meshes for turbomachinery
designs is what AutoGrid5 is all about. Generating high-
quality grid is now fast and easy: AutoGrid5 can do it
automatically starting from your geometry.
Join us for this webinar and get familiar with the
environment. The main features of AutoGrid5 will be
presented through a Contra-Rotating Open-Rotor application.
-
[Violent Flows 2012] 2nd international conference on Violent Flows (VF2012) - Sept. 25-27, 2012 - Nantes, France
Conference, Ecole Centrale Nantes, Nantes, France, September 25, 2012 This conference will gather research scientists
expertise in the field of violent interface hydrodynamic
flows, so as to share and assess progress made in the field
since the 1st edition held in Fukuoka in 2007. The
latest achievements in
research on strongly nonlinear hydrodynamics in all its
aspects will be discussed. The latter include experimental
and physical
modeling up to advanced numerical simulation with an
emphasis on emerging immersive/interactive simulation
techniques of these flows.
-
Reservoir Simulation Post-processor Webinar
Online Event, September 25, 2012 Join us for a 1 hour free webinar and live demo to see how
you can benefit from Kraken.
Register here > http://bit.ly/Krakenweb
-
Flow Measurement & Allocation Metering
Workshop, Kuala Lumpur, Malaysia, September 24, 2012 Best Practices In Design & Operation Of Metering Stations
-
International Conference on Applications of Fluid Engineering
Conference, Dept. of Mech. Engg., G. L. Bajaj Inst. of Tech. & Mgmt, Greater Noida, India, September 20, 2012 The field of fluid mechanics is vast and has numerous and
diverse applications. The conference will cover a wider
range of topics, including basic formulations and their
computer modelling as well as the relationship between
experimental and analytical results. The object of the
meeting is to provide a forum for discussing new work
in fluid mechanics and to promote the interchange of new
ideas, presentation of the latest applications in the field.
-
CFD OpenHouse
Kruppstr. 90, ETEC, 1. Etage Raum V5-1.02, Essen, Germany, September 19, 2012 ESI invites you to an OpenHouse on September 19th, 2012, in
their CFD competence center in Essen, Germany. For more
information visit our website
http://www.esi-group.com/corporate/events/cfd-open-house-german
-
7th Symposium on Numerical Analysis of Fluid Flow and Heat Transfer
Conference, Kypriotis Hotels and Conference Center, Kos, Greece, September 19, 2012 Understanding fluid dynamics and heat transfer has been one
of the major advances of mathematics, physics and
engineering. Our symposium covers various subjects: from new
numerical methods and fundamental research until engineering
applications.
-
Symposium on Mathematical Modeling, Simulation and Analysis of the Liquid Sloshing Problem
Conference, Kypriotis Hotels and Conference Center, Kos, Greece, September 19, 2012 The aim of this symposium is to bring together
researchers
who work in the
fields related to modeling, simulation or analysis of
the
sloshing type
problems by using mathematical approaches (analytical
or
numerical) and
discuss recent advances.
-
Info Day on Scripting in ANSYS Tools
Seminar, Radisson Blu Astrid Hotel, Koningin Astridplein 7, Antwerp, Belgium, September 19, 2012 Learn about:
Scripting in Workbench /Project Schematic
Scripting in Design Modeler & Meshing
Scripting Solvers and CFD Post
Coupling with External Programs
Application Customisation Toolkit (ACT)
Take the opportunity to meet and discuss your challenges
with peers, the presenters and ANSYS.
-
Add or customize physical models in FINE/Open using OpenLabs
Online Event, September 19, 2012 Always wanted to go beyond the capabilities of existing CFD
packages?
Wish to customize an existing physical model or add your
own?
This free webinar will show how FINE/Open with OpenLabs can
help.
-
OpenFOAM Introductory and Advanced Courses
Course, Mainz, Germany, September 18, 2012 This two courses are delivered by Dr. Henrik Rusche (Intro)
and H. Jasak (Advanced), one of the main developers of
OpenFOAM.
-
XX Fluid Mechanics Conference
Conference, Gliwice, Poland, September 17, 2012 It is our privilege to invite you to attend the XX Fluid
Mechanics Conference KKMP2012 in Gliwice (Poland). The aim
of the Conference is to unite scientists from different
countries and unite different approaches ranging from new
experimental techniques to computational methods.
-
2012 FLOW-3D World Users Conference
User Conference, Hyatt at Fisherman's Wharf, San Francisco, United States, September 13, 2012 The 2012 FLOW-3D World Users Conference will be held
September 13-14, 2012 at the Hyatt at Fisherman's Wharf in
San Francisco, CA, preceded by a day of free training. Join
Flow Science staff and FLOW-3D users from around the world
for insightful presentations, engaging conversations and a
chance to pose your questions directly to Flow Science's
developers and support staff.
-
Webinar - Engineering Simulation Solutions for the Oil & Gas Industry
Online Event, September 13, 2012 Engineering simulation software from ANSYS is playing an
increasingly critical role, enabling oil and gas engineers
to create
virtual prototypes and capture new knowledge about the
detailed workings of their equipment and processes.
-
Optimising Solving Speed using HPC
Seminar, Radisson Blu Astrid Hotel, Koningin Astridplein 7, Antwerp, Belgium, September 12, 2012 This seminar is intended to answer the following questions:
What factors are important when running FEA and CFD
calculations using HPC?
How can I achieve maximum scalability when running these
calculations?
What different types of hardware affect the performance of
solving?
What are the best practices for Job Scheduling and Remote
solving?
How can I use all this information to find the right balance
between licensing and hardware costs?
-
International summer school on design and optimization using Computer Aided Engineering tools for external aerodynamics problem
Course, Via R. Sanzio, 4, Segrate (Milan), Italy, September 11, 2012 The main aim of the school is to develop an appropriate
methodology for the design and the optimization in external
aerodynamics problems in green-power engineering.
-
NAFEMS North America Conference
Conference, Hyatt Dulles, Washington, D.C., United Kingdom, September 11, 2012 Engineering Simulation: A 2020 Vision of the Future
-
Reservoir Simulation Post-processor Webinar
Online Event, September 11, 2012 Join us for a 1 hour free webinar and live demo to see how
you can benefit from Kraken.
Register here > http://bit.ly/Krakenweb
-
10th UK Conference on Wind Engineering (WES 2012)
Conference, the Arts Annex, University of Southampton, Southampton, United Kingdom, September 10, 2012 The 10th UK Conference on Wind Engineering WES-2012 will be
held at the University of Southampton, UK from 10th to 12th
September 2012.
-
High Performance Computing Autumn Academy
Course, New Museums Site, Cambridge, United Kingdom, September 10, 2012 The Autumn Academy is targeted at people just starting a
PhD, though it is highly suitable for more mature
researchers from academia or industry. The Academy will take
attendees through Basic HPC
tools, Programming, Performance Programming, Parallel
Architectures, Shared Variables Parallelism, Message Passing
Parallelism and Practical Parallel Programming.
-
9th European Fluid Mechanics Conference
Conference, University of Rome "Tor Vergata", Rome, Italy, September 9, 2012 The 9th Euromech Fluid Mechanics Conference will be held at
the University of Rome "Tor Vergata" from 9 to 13 September
2012. The conference aims at covering the whole field of
Fluid Dynamics, comprising from most fundamental aspects to
recent applications. It provides a world-wide forum for
scientists to meet each other and exchange information of
all areas of fluid mechanics.
-
modeFRONTIER Workshop
Workshop, International Digital Lab, University of Warwick, Coventry, United Kingdom, September 5, 2012 Introductory Workshop to the Multidisciplinary Design
Optimisation and Process Integration Software modeFRONTIER.
-
Webinar - Curious About Making User Defined Functions
Online Event, September 4, 2012 Writing UDF:s can get very complicated and be as versatile
as the applications themselves.
This webinar aims at showing the basic process of writing
and using an UDF.
-
NUMAP-FOAM Summer School 2012
Workshop, Faculty of Mechanical Engineering, University of Zagreb, Zagreb, Croatia, August 29, 2012 Intensive practical course in numerical methods, physical
modelling and programming with OpenFOAM, with individual
tuition in duration of 11 working days, orgamised by the
University of Zagreb and Wikki.
-
CFD for Vehicle Aerodynamics (New trends in CFD for external vehicle aerodynamics)
Course, Chalmers University of Technology, Gothenburg, Sweden, August 29, 2012 The course will give an introduction in how time-dependent
techniques such as Large-Eddy Simulations (LES),
Detached-Eddy Simulations (DES), Partially-Averaged
Navies-Stokes (PANS) and unsteady RANS (URANS) can be used
in vehicle aerodynamics. Second part of the course will
introduce recent development in aerodynamic shape
optimization. The third part of the course will discuss
flow control and how time-dependent CFD approaches can be
used to improve aerodynamic performance of vehicles.
-
NEW BREAKTHROUGH IN MODERN CFD SEASON 2
Seminar, University Malaya (UM), Kuala Lumpur, Malaysia, August 27, 2012 Now,no more headache to create your mesh and spending so
much time in front of your PC to fix your mesh!
No more waste time to create your mesh! Just spend your time
to analyze the computed results!
No more waiting for to obtain your convergence! Say adios to
classical CFD!!!
We provide high quality mesh with high quality results with
just minutes and shorten the CFD cycle from months to weeks,
from weeks to days and from days to hours!!!!
-
Reservoir Simulation Post-processor Webinar
Online Event, August 8, 2012 Join us for a 1 hour free webinar and live demo to see how
you can benefit from Kraken.
Register here > http://bit.ly/Krakenweb
|