-
OpenFOAM Course
Course, Euston House, 24 Eversholt Street, London, United Kingdom, October 3, 2016
OpenFOAM Foundation and Advanced trainings (each for 2 days)
bring the
essential knowledge of OpenFOAM software. After the
trainings the users will
be able to
run OpenFOAM cases, understand where to find relevant
information, use
efficiently snappyHexMesh mesh generator, use Function
Objects and other
features of OpenFOAM.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, October 1, 2016
Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
Classes - about 5 hours perday (Theory +
practicals).Theory most probably from 5 PM to 7 PM
(Monday to saturday)
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-October-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-October-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Free Webinar: Rocket Engine Turbopump
Online Event, September 29, 2016
This one-hour webinar begins with a brief introduction to
liquid rocket engines and rapidly brings attendees to the
design and optimization of turbopumps in the AxSTREAM®
platform. At the turbomachinery component level a
turbopump reduces to the fuel pump, oxidizer pump, and
turbine which are discussed in the webinar.
-
Aerospace ECS – Cabin Design and Analysis Using Thermo-Fluid System Simulation
Online Event, September 29, 2016
View this presentation to learn about thermo-fluid system
design for a cabin distribution in an aerospace
environmental control system using 1D CFD.
-
Increasing CFD Simulation Throughput for Real, Complete Pump Systems
Online Event, September 29, 2016
By participating in this webinar, you will gain a greater
understanding of how to Ssimulate complex flow behavior
in real, complete pump systems by using 3-D CAD geometry
as-is – without needing to simplify your systems and
introduce approximations which reduce the accuracy of
your simulation results - and more!
-
Introduction to CFD Analysis for Chemical Process Engineers An Online Instructor Led Training Course
Online Event, September 28, 2016
The objective of the course is to introduce process
engineers to CFD analysis and discuss how CFD results can
be used to solving mixing problems. The course will cover
the basic aspects of CFD.
-
Advanced Simulation for Internal Combustion Engines (ICE)
Workshop, Mövenpick Hotel Nürnberg Airport, Nuremberg, Germany, September 28, 2016
Please join us for the workshop on September 28, 2016, to
hear firsthand about the benchmark results and
development efforts for both STAR-CD/es-ice and STAR-
CCM+® solutions. Specialists will highlight advanced
developments and workflow automation, and how they are
delivering added value and time savings to ICE customers.
-
Better Medical Device Design, Faster
Online Event, September 28, 2016
This webinar will show the latest advancements in the
integration of simulation and PLM technologies to help
you Design Better Medical Devices, Faster. Presenters
will highlight tools that are available to help improve
not only your design process, but specifically benchtop
tests and in vitro and in vivo tests. This online event
will also address how to better document and track your
work and to accelerate the clinical trial approval
process.
-
Fluid Dynamics Workshop
Workshop, Provinciehuis Vlaams-Brabant, Leuven, Netherlands, September 27, 2016
Fluid flow is involved in many engineering applications.
Discover the power of COMSOL Multiphysics for fluid
dynamics
analysis and any multiphysics application involving fluid
flow
in this workshop.
-
XFlow Practical Free Webinar to learn how to run XFlow/MSC Nastran FSI Co-Simulations
Online Event, September 27, 2016
Join our Free and Public webinar next September 27th 2016 at
10:00 AM or 6:00 PM CEST. This webinar will be about the FSI
Co-simulations capability between XFlow and MSC Nastran. In
this webinar, you will learn how to run a co-simulation of a
spacecraft parachute and co-simulation of an elastic beam.
-
CFD for Microfluidics & Biomedical Flows - Workshop
Workshop, Warsaw, Poland, September 26, 2016
QuickerSim is giving a 2-day workshop focused on biomedical
and microfluidic simulations in QuickerSim CFD Toolbox.
-
3-Day AxCYCLETraining Workshop
Course, 1500 District Avenue, Burlington, United States, September 26, 2016
This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™. During this
interactive, hands-on workshop, engineers will use the
AxCYCLE™ software to successfully perform modeling and
simulation of thermodynamic cycles at design and off-
design conditions as well as undertake optimization
tasks.
-
2016 FLOW-3D Americas Users Conference
User Conference, Warwick Allerton Hotel, Chicago, United States, September 22, 2016
Flow Science's annual FLOW-3D Americas Users Conference is
an exciting event where users advance their simulation
skills through interactions with Flow Science staff
engineers, collaboration with other users, exploring new
modeling approaches, and learning about the latest FLOW-3D
features — this year in the home of deep-dish pizza, Second
City Improv, and the Miracle Mile.
-
Discover Better Reactor Designs, Faster Through Computational Fluid Dynamics
Workshop, Manchester United Limited, Manchester, United Kingdom, September 22, 2016
This workshop will demonstrate how CFD simulation and
modeling have become critical components for examining
and adapting new designs, reducing operational costs, and
guiding regulatory priorities and practices in the civil
nuclear industry and military applications. Guest
speakers include Dr. Afaque Shams, Research Consultant at
NRG, Dr. Nicolas Goreaud, Section Manager at AREVA NP and
Dr. Emilio Baglietto, professor at MIT.
-
Fluid Dynamics Workshop
Workshop, Rontgenlaan 37, Zoetermeer, Netherlands, September 22, 2016
Fluid flow is involved in many engineering applications.
Discover the power of COMSOL Multiphysics for fluid dynamics
analysis and any multiphysics application involving fluid flow
in this workshop.
-
Free CFD Workshops
Workshop, Warwick Allerton Hotel, Chicago, United States, September 21, 2016
Two FREE hands-on workshops geared towards prospective users
of FLOW-3D and FLOW-3D Cast will be held in Chicago on
September 21, 2016 in conjunction with the FLOW-3D Americas
Users Conference. The workshops will focus on two major
application areas where FLOW-3D and its three-dimensional,
transient, free-surface modeling capabilities shine. Bring
your own laptop to follow along or just watch. All workshop
registrants will receive a 30-day license of FLOW-3D or
FLOW-3D Cast (a $2,000 value).
-
3-Day AxSTREAM Training Workshop
Course, 1500 District Avenue, Burlington, United States, September 21, 2016
The goal of this course is to provide engineers with a
better understanding of steam and gas turbines and help
them find new, more accurate, cost-saving solutions
through successful axial turbine design and operation
tasks.
-
3-Day AxSTREAM Training Workshop
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road, Bangalore-560052, India, September 21, 2016
This training provides participants with a practical
understanding of the design and optimization of flow
paths for turbomachinery equipment using AxSTREAM™.
During this interactive, hands-on workshop, engineers
will use AxSTREAM™ software to successfully perform
preliminary design of turbomachinery flow paths, inverse
and direct 1D/2D analysis and optimization, 3D
profiling/stacking of the airfoils, 3D FEA and CFD, and
export of results to 3D CAD programs.
-
fast Track Batch on CFD with OpenFOAM
Course, Chinchwad, Pune, India, September 20, 2016
This course is for you, if you are:
New to OpenFOAM || You have partial training in OpenFOAM ||
Want to develop proficiency in CFD / OpenFOAM || Want to
simplify the use of OpenFOAM || PG Student, Research
Scholar, starting career in CFD || R&D person either in
industry / lab etc
-
Better Designs Faster with Integrated Fluid-Structure Interaction (FSI)
Online Event, September 20, 2016
This webinar will demonstrate how FSI problems can now be
set up and solved within a single integrated user
interface, taking into account fluid flow, structural
response and automatic coupling between the two.
-
The 11th International Symposium on Numerical Analysis of Fluid Flows, Heat and Mass Transfer - Numerical Fluids 2016
Conference, Rodos Palace Hotel, Rhodes, Greece, September 19, 2016
Understanding fluid dynamics and heat transfer has been one
of the major advances of mathematics, physics and
engineering. Our symposium covers various subjects: from new
numerical methods and fundamental research until engineering
applications. This annual meeting is a part of the
International Conference of Numerical Analysis and Applied
Mathematics - ICNAAM 2016.
-
Steam and Gas Turbine Design: 5-Day Training Course
Course, 1500 District Avenue, Burlington, United States, September 19, 2016
The goal of this course is to provide engineers with a
better understanding of steam and gas turbines and help
them find new, more accurate, cost-saving solutions
through successful axial turbine design and operation
tasks.
-
Axial & Centrifugal Pumps Fundamentals, Design & Optimization – 5 Day Training Course
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road, Bangalore-560052, India, September 19, 2016
The course structure will familiarize attendees with the
basics of pump design, starting from a theoretical
overview and ending with practical hands-on examples of
how to implement the suggested procedures.
-
8 Day Axial Compressor Online Training
Online Event, September 19, 2016
This axial compressor design course covers a broad range
of topics from general compressor layouts to a detailed
approach of flow path aerodynamic design, including axial
compressor analysis, optimization, mixed flow compressor
design, and axial fan design. The extensive theoretical
session is supported by multiple examples and exercises
which bring a practical understanding of the topics
explored.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, September 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
ERCOFTAC- Advanced Computing for Fluid Solver, 15-16 September 2016, Amazon Web Services, London, UK
Course, Amazon Web Services, London, United Kingdom, September 15, 2016
Experienced modelling and simulation practitioners and new
researchers are aware of the rapid rates of progress in many
areas of ICT. The progress cover (i) accelerated
processing speed, (ii) big data, (iii) remote data analysis
, and (iv) low cost ops. The full benefits are often seen
hard to access and assess. The course delivers a guide with
hands-on training on open available tools. Attendees need
bring a laptop for the tutorial sessions.
-
Structure Functions at the System Level
Online Event, September 15, 2016
Attend an upcoming online web seminar on how to understand
package thermal performance within real electronic systems
using structure functions.
-
Numerische Berechnung turbulenter Strömungen in Forschung und Praxis
Course, Dresden, Germany, September 14, 2016
Der Kurs hat zum Ziel, Ingenieure der Industrie und
Forschung mit modernen Methoden der Simulation turbulenter
Strömungen vertraut zu machen. Er besteht aus 16 sorgfältig
aufeinander abgestimmten Vorlesungen namhafter Experten. Sie
zeigen
Möglichkeiten und Grenzen auf und
vermitteln Grundlagen zur Qualitätsbeurteilung numerischer
Rechenergebnisse. Es besteht auch Gelegenheit eigene
Fragestellungen
intensiv mit den Referenten zu diskutieren.
-
3-Day AxSTREAM Training Workshop
Course, Baarerstrasse 2, Zug, Switzerland, September 14, 2016
This training provides participants with a practical
understanding of the design and optimization of flow
paths for turbomachinery equipment using AxSTREAM™.
During this interactive, hands-on workshop, engineers
will use AxSTREAM™ software to successfully perform
preliminary design of turbomachinery flow paths, inverse
and direct 1D/2D analysis and optimization, 3D
profiling/stacking of the airfoils, 3D FEA and CFD, and
export of results to 3D CAD programs.
-
Better Metal-Temperature Calculations Faster with Conjugate Heat Transfer (CHT) and CFD
Online Event, September 13, 2016
As you will see in this webinar, the CHT method available
in leading simulation software is especially effective
for discovering better thermal designs faster, due to the
combination of several technologies particular to STAR-
CCM+®. Best practices for performing CHT calculations
will also be provided as part of this presentation and a
live demonstration will be presented.
-
Rotor Dynamics and Bearing Design - 3 Day Training Course
Course, 1500 District Avenue, Burlington, United States, September 12, 2016
This course covers rotor dynamics analysis and bearings
simulation for different types of rotors. Rotor dynamics
fundamentals, basic design rules and analyses according
API and other standards, bearing simulation aspects are
explained.
-
OpenFOAM Course
Course, ETC - Enterprise Training Center GmbH, Vienna, Austria, September 12, 2016
OpenFOAM Foundation and Advanced trainings (each for 2 days)
bring the
essential knowledge of OpenFOAM software. After the
trainings the users will
be able to
run OpenFOAM cases, understand where to find relevant
information, use
efficiently snappyHexMesh mesh generator, use Function
Objects and other
features of OpenFOAM.
-
Centrifugal Compressor Design: 5-Day Training Course
Course, Baarerstrasse 2, Zug, Switzerland, September 12, 2016
This comprehensive course includes multiple topics,
starting with the basics of fluid dynamics and ending
with a detailed overview of multistage centrifugal
compressor design. To provide students with a better
understanding of the materials covered, the course
features numerous real-life examples and exercises.
-
2nd edition of the international workshop on CFD and biomass thermochemical conversion, Leipzig September the 9th, 2016
Workshop, Hotel Pologne, Leipzig, Germany, September 9, 2016
Dear colleagues,
I have the pleasure to announce the 2nd edition of the
international workshop on CFD and biomass thermochemical
conversion which will take place on September the 9th, 2016
in Leipzig, Germany.
The workshop covers all areas of CFD applications to biomass
thermochemical conversion, including (not limited to):
• Small scale combustion
• Medium and large scale combustion
• Co-firing
• Gasification
-
SEMINAR at SMM 2016 - Steer the Right Course with FINE™/Marine
Seminar, Radisson BLU Hotel, Hamburg, Germany, September 8, 2016
Attend our FINE™/Marine Workshop to experience first-hand
how NUMECA’s dedicated maritime CFD tools allow you to be
prepared for today’s challenges.
-
UK Fluids Conference 2016
Conference, Imperial College, London, United Kingdom, September 7, 2016
The EPSRC Centres for Doctoral Training (CDT) in Fluid
Dynamics at the University of Leeds and Imperial College
London have joined forces to organise what we plan to be
a new annual UK Fluids Conference. Our primary intention
is to encourage greater cohesion and interaction amongst
the fluids communities in the UK and to be of benefit, in
particular, to PhD students.
-
11th International Conference on Advances in Fluid Mechanics
Conference, Hotel Excelsior La Fonte, Ancona, Italy, September 5, 2016
The conference covers a wide range of topics, including
basic formulations and their computer modelling as well as
the relationship between experimental and analytical
results. The emphasis is on new applications and research
currently in progress.
-
5 days course on 'An Advanced Introduction to the Finite Volume Methods in Computational Fluid Dynamics (with OpenFoam)''
Course, Indian Institute of Technology Indore, Indore, India, September 5, 2016
5 days course that gives an advanced introduction to finite
volume method in
CFD;
Organized by Indian Institute of Technology Indore, Madhya
Pradesh, INDIA
under Global Initiative of Academic Networks program (GIAN),
Ministry of Human
Resource Development, Government of India
-
Discover Better Designs, Faster
Workshop, Östergårdsgatan 2, Mölndal, Sweden, September 2, 2016
Imagine achieving better product designs, faster and with
less testing or repetitive manual work. A new capability
with automated workflow is available now! Learn how to
deploy design exploration easily with MDX
(Multidisciplinary Design eXploration), a methodology
that can link, enable and accelerate your current
simulation tools to give you much greater return on
investment.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, September 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, September 1, 2016
Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
Classes - about 5 hours perday (Theory +
practicals).Theory most probably from 5 PM to 7 PM
(Monday to saturday)
-
Introductory Water & Environmental FLOW-3D Workshop
Workshop, North Carolina Biotechnology Center, Raleigh, United States, August 31, 2016
Flow Science is offering an all-day workshop exploring
water & environmental applications using FLOW-3D.
-
Free Webinar-Mixing Tank – Scale up Your Mixing Process Like A Pro..
Online Event, August 31, 2016
Achieve Successful Scale-ups from Lab To Production Sites
-
Introductory Microfluidics FLOW-3D Workshop
Workshop, North Carolina Biotechnology Center, Raleigh, United States, August 30, 2016
Flow Science is offering an all-day workshop exploring
microfluidic applications using FLOW-3D.
-
Fluids under Pressure
Course, Institute of Mathematics, AS CR , Žitná 25, Prague 1, Czech Republic, August 29, 2016
The aim of the summer school is to present a comprehensive
series of lectures on problems related to pressure and its
role in mathematical analysis and numerical simulation of
various types of flows. It is a multidisciplinary event with
topics ranging from theoretical and numerical mathematics up
to physics and applications.
Besides of the course lectures, the program
will include a one day workshop (on Wednesday, August 31)
dedicated to short, more advanced lectures given by
attending scientists.
-
Classroom training on FINE™/Marine (Brussels, Belgium)
Workshop, NUMECA International, Brussels, Belgium, August 29, 2016
Join NUMECA's training and get acquainted with the full
FINE™/Marine suite, from your project requirements to the
solution!
-
Live Webinar: Automated Geometry Optimization
Online Event, August 25, 2016
Please join Flow Science and Friendship Systems for a live
webinar that will demonstrate how you can bring your
simulation-driven design to the next level using the
automated optimization software CAESES and FLOW-3D Cast.
-
TRAINING: Internal Combustion Engine Modeling in CONVERGE
Course, 21500 Haggerty Road, Suite 120, Livonia, United States, August 24, 2016
This two-day course offers an introduction to
CONVERGE v2.3 for
internal combustion (IC) engine modeling. You will
learn about the
CONVERGE solver and modeling options while working
through a
typical IC engine case from start to finish.
-
AxSTREAM Turbo Machinery Design Traditional Onsite Classroom Course - Softinway Inc.
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore, India, August 24, 2016
This training provides participants with a practical
understanding of the design and optimization of flow paths
for turbomachinery equipment using AxSTREAM™. During this
interactive, hands-on workshop, engineers will use AxSTREAM™
software to successfully perform preliminary design of
turbomachinery flow paths, inverse and direct 1D/2D analysis
and optimization, 3D profiling/stacking of the airfoils, 3D
FEA and CFD, and export of results to 3D CAD programs.
-
TRAINING: Surface Preparation with CONVERGE
Course, 21500 Haggerty Road, Suite 120, Livonia, United States, August 23, 2016
This course offers an introduction to surface
preparation in CONVERGE
Studio v2.3.
-
NUMAP-FOAM Summer School 2016
Course, University of Zagreb, Zagreb, Croatia, August 22, 2016
2-week tutored summer course for advanced OpenFOAM users.
-
Waste Heat Recovery Traditional Onsite Classroom Course - Softinway Inc.
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore, India, August 22, 2016
Design of a Waste Heat Recovery System – 5 Day Training
Course Overview The objective of this course is to provide
participants theoretical and practical training on designing
waste heat recovery systems for improving energy
efficiencies in existing and new energy intensive systems.
During this course the participants will be exposed to
design of systems for waste heat recovery from low
temperature sources.
-
The 3rd International Conference on Heat Transfer and Fluid Flow (HTFF'16)
Conference, Novotel Budapest Centrum, Budapest, Hungary, August 16, 2016
The 3rd International Conference on Heat Transfer and
Fluid Flow (HTFF'16) aims to become the leading annual
conference in fields related to heat transfer and fluid
flow.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, August 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Gaining Insight into Heat Exchanger Design Performance
Online Event, August 11, 2016
Optimize design of automotive heat exchangers for
performance, cost and resources.
-
XFlow Free Webinar: How to run XFlow CFD simulations on Rescale cloud HPC?
Online Event, August 10, 2016
Free Webinar: How to run XFlow CFD simulations on Rescale
cloud HPC?
-
Axial Turbine Design online course- Softinway Inc. - TurboMachinery Mastered
Online Event, August 8, 2016
he course details the key principles of axial turbine design
and operation. The highlights of the program include:
fundamentals of thermodynamics, gas dynamics, structural
analysis, and basics of steam turbines and their elements.
This comprehensive course gives in-depth insight into
turbine engineering, starting from general data like turbine
classification and layouts, and ending with 3D blade design.
-
Live Webinar: Microfluidic Flow Modeling
Online Event, August 4, 2016
FLOW-3D’s free surface and multi-fluid modeling capabilities
provide highly accurate simulations for a wide range of
microscale fluid flow applications. Please join us for a
technical webinar on August 4 that will explore
lab-on-a-chip applications, additive manufacturing and metal
deposition and ink jet processes.
-
Vehicle Overheating Scenarios Explored - A 1D CFD Modeling Approach
Online Event, August 3, 2016
This technical webinar discusses advanced 1D fluid dynamics
and wider powertrain modeling methodology to thermally
analyze vehicle cooling systems to explore various scenarios
for potential vehicle overheating.
-
Predicting the Real-World Performance of Your Products with Multiphase Simulations
Online Event, August 3, 2016
This event will cover a wide variety of applications that
can be solved with multiphase simulations delivered from
a single integrated user interface. Examples include the
build-up of ice on an aircraft wing, the demisting of a
headlamp, the transport of rocks/aggregates, dropping a
lifeboat into the sea or the spray painting of a car.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, August 1, 2016
Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, August 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Live Free Webinar on “Fundamental Understanding Of Solids Flow Processes” 28th July 9am CDT
Online Event, July 28, 2016
Tridiagonal Solutions Inc, a global chemical process
enhancement solutions provider, will be hosting a live free
webinar on “Fundamental Understanding Of Solids Flow
Processes : A Key To Successful Process Development” on 28th
July, 2016 from 9:00 am to 10:00 am CDT, 4:00 pm – 5:00 pm
CEST and 3:00 pm – 4: 00 pm UK.
-
Check out these workshops at NUMECA this summer!
Workshop, NUMECA International, Brussels, Belgium, July 28, 2016
NUMECA International has a whole series of workshops
planned this summer! We would be happy to welcome you in
one of them
-
Improving Thermal Interface Material (TIM) Thermal Testing Accuracy
Online Event, July 27, 2016
An introduction to DynTIM, Mentor Graphics’ simple yet
highly accurate solution for the measurement of the bulk
thermal conductivity coefficient of TIM materials.
-
FINE™/Turbo v11.1: new features webcast!
Online Event, July 27, 2016
Discover the new features of NUMECA’s CFD suite dedicated
to turbomachinery: FINE™/Turbo!
-
Steam and Combined Cycles Design online course- Softinway Inc. - TurboMachinery Mastered
Online Event, July 26, 2016
This online training course will teach the fundementals of
Steam and Combined Cycles using the AxCYCLE software.
-
TRAINING: Internal Combustion Engine Modeling in CONVERGE
Course, 6400 Enterprise Lane, Madison, United States, July 20, 2016
This two-day course offers an introduction to
CONVERGE v2.3 for
internal combustion (IC) engine modeling. You will
learn about the
CONVERGE solver and modeling options while working
through a
typical IC engine case from start to finish.
-
TRAINING: Surface Preparation with CONVERGE
Course, 6400 Enterprise Lane, Madison, United States, July 19, 2016
This course offers an introduction to surface
preparation in CONVERGE
Studio v2.3.
-
Live Webinar: FLOW-3D Cast v4.2
Online Event, July 19, 2016
Combining an intuitive, progressive user interface, FLOW-3D
Cast guides users to successful project setup with the
powerful FLOW-3D solver, delivering accurate predictions of
filling and solidification-related defects. Please join us
for a webinar on July 19 that will present the new models,
features and design workflows of FLOW-3D Cast v4.2.
-
11th ASMO UK/ISSMO/NOED2016: International Conference on Numerical Optimisation Methods for Engineering Design
Conference, Munich, Germany, July 18, 2016
Multi-disciplinary and adjoint-based design optimisation
methods are providing powerful and systematic model-based
processes for the optimisation of increasingly complex
engineering systems, including many important examples in
the aerospace and automotive industries.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, July 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
14th ERCOFTAC Osborne Reynolds Day, Manchester University
George Begg Building, Sackville St, University of Manchester, Manchester, United Kingdom, July 14, 2016
The Osborne Reynolds Oral and Poster PhD competitions offer
prestigious awards that celebrate the quality of students
and graduates who have been pursuing doctoral‐level research
across the broad domain of fluid mechanics including
turbulence, multi‐phase, stratified and free‐surface flows,
convective transport processes, combustion and acoustics.
Entry to both competitions is open to current and recent
PhD graduates from a UK university.
-
Thermodynamioc Cycle Design, Analysis, and Optimization with AxCYCLE - Softinway Inc.
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore, India, July 13, 2016
This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™. During this
interactive, hands-on workshop, engineers will use the
AxCYCLE™ software to successfully perform modeling and
simulation of thermodynamic cycles at design and off-design
conditions as well as undertake optimization tasks.
-
9TH INTERNATIONAL CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS
Conference, GRAND CEVAHIR HOTEL, ISTANBUL, Turkey, July 11, 2016
ICCFD, a biennial event, is the merger of two important
CFD conferences: the International Conference on
Numerical Methods in Fluid Dynamics, ICNMFD
(since 1969) and International Symposium on Computational
Fluid Dynamics, ISCFD (since 1985). The first ICCFD
conference was held in 2000 in Kyoto, the seventh in 2012
in
Hawaii, the eighth in 2014 in Chengdu, and the ninth
conference, ICCFD9, will be held in Istanbul, Turkey in
July 11-15, 2016.
-
International Conference on the Finite Volume Method
Conference, American University of Beirut, Beirut, Lebanon, July 11, 2016
The goal of this conference is to bring together
mathematicians, physicists,
and engineers interested in the developments and
applications of the finite
volume method.
-
Waste Heat Recovery Online Training Course- Softinway Inc.
Online Event, July 11, 2016
The objective of this course is to provide participants
theoretical and practical training on designing waste heat
recovery systems for improving energy efficiencies in
existing and new energy intensive systems. During this
course the participants will be exposed to design of systems
for waste heat recovery from low temperature sources.
-
International Workshop on the Physics of Compressible Turbulent Mixing
Conference, School of Aerospace, Mechanical and Mechatronic Engineering, Sydney, Australia, July 10, 2016
The 15th International Workshop on the Physics of
Compressible Turbulent Mixing (IWPCTM) brings together
researchers from universities and research laboratories
around the world to discuss the state-of-the-art in theory,
modelling, experiment and simulation of compressible and
variable-density turbulent mixing induced by hydrodynamic
instabilities in multi-material hydrodynamic flows.
-
IMA Conference on Turbulence, Waves and Mixing
Conference, United Kingdom, July 6, 2016
The theme of this conference is to discuss, with review
lectures and contributed papers, the ongoing developments
of research in ‘turbulence, waves and mixing’ and their
applications in industry, environment and geo/astro and
mathematical physics.
-
ThermaComp2016
Conference, Academy of medicine at Georgia Tech, Atlanta, United States, July 6, 2016
4th International Conference on Computational Methods for
Thermal Problems
-
8EPFDC
Conference, Faculty of Physics of University of Warsaw, 5 Pasteura Street, Warsaw, Poland, July 6, 2016
8 European Postgraduate Fluid Dynamics Conference
-
XFlow Public Webinar: XFlow/MSC.Adams Advanced Co-Simulations
Online Event, July 6, 2016
an XFlow Public Webinar about the co-simulation capability
between XFlow and MSC.Adams next July 6th 2016.
-
Organic Rankine Cycle Overview and Heat Balance Calculation
Online Event, July 5, 2016
Overview of the Organic Rankine Cycle and Heat Balance
calculation using AxCYCLE software
-
the 25th International Conference on Discrete Simulation of Fluid Dynamics (DSFD2016)
Conference, South University of Science and Technology of China, Shenzhen, China, July 4, 2016
It is a great forum for researchers on discrete simulation of
fluid dynamics.
-
Complete CFD Basics with Physical Significance and Mathematical Modelling using OpenFOAM
Online Event, July 3, 2016
This event will cover all the basic concepts in CFD
including turbulence modeling, Discretization of PDE, SIMPLE
Algorithms, Differencing Schemes and their Physical Significance
-
Weekend batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 02-July-2016
Course, Niharika Institute of Computational Engineering, New Thippasandra,HAL 3rd stage ,Bangalore, India, July 2, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on saturday 3 to 6 PM and Sunday 2to 5
PM.Total duration 2 Months.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, July 1, 2016
Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, July 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, July 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Designing Under-Body Components Using Leading Wading Simulation Methods
Online Event, June 30, 2016
This webinar looks at water management tools focusing on
state-of-the-art vehicle wading simulations. Attendees
will gain a valuable understanding of leading simulation
methods within this vital design area.
-
Design Exploration with CFD for Better Dry Low NOx Hydrogen Gas Turbine Combustors
Online Event, June 28, 2016
In this webinar, you will hear from guest presenter Anis
Haj Ayed from B&B-AGEMA in Aachen, Germany, who is a
subject-matter expert in the use of CFD for leading-edge
GT combustion simulations. Anis will share the success
story associated with his company’s ability to discover
better designs, faster, ensuring the desired performance
of innovative Dry Low NOx (DLN) micro-mix hydrogen
combustors in modified gas turbines.
-
AxSTREAM Workshop
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore-560052, India, June 27, 2016
3-Day Training Workshop for Professional Designers, June 27
- 29, Banglore
-
Turbomachinery Design Traditional Onsite Classroom Course - AxSTREAM Workshop
Course, Flat No. 301, 3rd Floor, Royal Manor,, Bangalore, India, June 27, 2016
This training in a traditional classroom setting provides
participants with a practical understanding of the design
and optimization of flow paths for turbomachinery equipment
using AxSTREAM™. During this interactive, hands-on workshop,
engineers will use AxSTREAM™ software to successfully
perform preliminary design of turbomachinery flow paths,
inverse and direct 1D/2D analysis and optimization, 3D
profiling/stacking of the airfoils, 3D FEA and CFD, and
export of results to 3D CAD programs.
-
FLOW-3D Workshop for Water & Environmental Flows
Workshop, Red Lion Hotel on the River – Jantzen Beach, Portland, United States, June 27, 2016
Flow Science CFD Engineers will demonstrate water &
environmental simulation workflows by modeling two case use
examples: a power-plant effluent discharge and a
pump-station jet outflow. Key modeling features include open
channel free surface hydraulics, scour & sediment
deposition, and thermal plume analysis. This workshop will
be held on Monday, June 27 in conjunction with the 6th
International Symposium on Hydraulic Structures.
-
11th International OpenFOAM Workshop
Workshop, Guimarães, Portugal, June 26, 2016
Since its inception, in 2006, the OpenFOAM® Workshop is
attended by a large group of users and developers, both from
industry and academy, interested in the OpenFOAM®
-
Steam and Gas Turbine Design
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore-560052, India, June 25, 2016
Steam and Gas Turbine Design: 5-Day Training Course, Jun
25-29, Bangalore
-
Steam and Gas Turbine Design - Softinway Inc.
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore, India, June 25, 2016
The goal of this course is to provide engineers with a
better understanding of steam and gas turbines and help them
find new, more accurate, cost-saving solutions through
successful axial turbine design and operation tasks.
-
Second International Conference in Numerical and Experimental Aerodynamics of Road Vehicles and Trains (AEROVEHICLES 2)
Conference, Chalmers University of Technology, Gothenburg, Sweden, June 21, 2016
Second International Conference in Numerical and
Experimental Aerodynamics of Road Vehicles and
Trains(AEROVEHICLES2) will take place from 21 to 23 June
2016 in Gothenburg, Sweden.
|
