-
Live Webinar: Automated Geometry Optimization
Online Event, August 25, 2016 Please join Flow Science and Friendship Systems for a live
webinar that will demonstrate how you can bring your
simulation-driven design to the next level using the
automated optimization software CAESES and FLOW-3D Cast.
-
TRAINING: Internal Combustion Engine Modeling in CONVERGE
Course, 21500 Haggerty Road, Suite 120, Livonia, United States, August 24, 2016 This two-day course offers an introduction to
CONVERGE v2.3 for
internal combustion (IC) engine modeling. You will
learn about the
CONVERGE solver and modeling options while working
through a
typical IC engine case from start to finish.
-
AxSTREAM Turbo Machinery Design Traditional Onsite Classroom Course - Softinway Inc.
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore, India, August 24, 2016 This training provides participants with a practical
understanding of the design and optimization of flow paths
for turbomachinery equipment using AxSTREAM™. During this
interactive, hands-on workshop, engineers will use AxSTREAM™
software to successfully perform preliminary design of
turbomachinery flow paths, inverse and direct 1D/2D analysis
and optimization, 3D profiling/stacking of the airfoils, 3D
FEA and CFD, and export of results to 3D CAD programs.
-
TRAINING: Surface Preparation with CONVERGE
Course, 21500 Haggerty Road, Suite 120, Livonia, United States, August 23, 2016 This course offers an introduction to surface
preparation in CONVERGE
Studio v2.3.
-
NUMAP-FOAM Summer School 2016
Course, University of Zagreb, Zagreb, Croatia, August 22, 2016 2-week tutored summer course for advanced OpenFOAM users.
-
Waste Heat Recovery Traditional Onsite Classroom Course - Softinway Inc.
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore, India, August 22, 2016 Design of a Waste Heat Recovery System – 5 Day Training
Course Overview The objective of this course is to provide
participants theoretical and practical training on designing
waste heat recovery systems for improving energy
efficiencies in existing and new energy intensive systems.
During this course the participants will be exposed to
design of systems for waste heat recovery from low
temperature sources.
-
The 3rd International Conference on Heat Transfer and Fluid Flow (HTFF'16)
Conference, Novotel Budapest Centrum, Budapest, Hungary, August 16, 2016 The 3rd International Conference on Heat Transfer and
Fluid Flow (HTFF'16) aims to become the leading annual
conference in fields related to heat transfer and fluid
flow.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, August 15, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Gaining Insight into Heat Exchanger Design Performance
Online Event, August 11, 2016 Optimize design of automotive heat exchangers for
performance, cost and resources.
-
XFlow Free Webinar: How to run XFlow CFD simulations on Rescale cloud HPC?
Online Event, August 10, 2016 Free Webinar: How to run XFlow CFD simulations on Rescale
cloud HPC?
-
Axial Turbine Design online course- Softinway Inc. - TurboMachinery Mastered
Online Event, August 8, 2016 he course details the key principles of axial turbine design
and operation. The highlights of the program include:
fundamentals of thermodynamics, gas dynamics, structural
analysis, and basics of steam turbines and their elements.
This comprehensive course gives in-depth insight into
turbine engineering, starting from general data like turbine
classification and layouts, and ending with 3D blade design.
-
Live Webinar: Microfluidic Flow Modeling
Online Event, August 4, 2016 FLOW-3D’s free surface and multi-fluid modeling capabilities
provide highly accurate simulations for a wide range of
microscale fluid flow applications. Please join us for a
technical webinar on August 4 that will explore
lab-on-a-chip applications, additive manufacturing and metal
deposition and ink jet processes.
-
Vehicle Overheating Scenarios Explored - A 1D CFD Modeling Approach
Online Event, August 3, 2016 This technical webinar discusses advanced 1D fluid dynamics
and wider powertrain modeling methodology to thermally
analyze vehicle cooling systems to explore various scenarios
for potential vehicle overheating.
-
Predicting the Real-World Performance of Your Products with Multiphase Simulations
Online Event, August 3, 2016 This event will cover a wide variety of applications that
can be solved with multiphase simulations delivered from
a single integrated user interface. Examples include the
build-up of ice on an aircraft wing, the demisting of a
headlamp, the transport of rocks/aggregates, dropping a
lifeboat into the sea or the spray painting of a car.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, August 1, 2016 Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, August 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Live Free Webinar on “Fundamental Understanding Of Solids Flow Processes” 28th July 9am CDT
Online Event, July 28, 2016 Tridiagonal Solutions Inc, a global chemical process
enhancement solutions provider, will be hosting a live free
webinar on “Fundamental Understanding Of Solids Flow
Processes : A Key To Successful Process Development” on 28th
July, 2016 from 9:00 am to 10:00 am CDT, 4:00 pm – 5:00 pm
CEST and 3:00 pm – 4: 00 pm UK.
-
Check out these workshops at NUMECA this summer!
Workshop, NUMECA International, Brussels, Belgium, July 28, 2016 NUMECA International has a whole series of workshops
planned this summer! We would be happy to welcome you in
one of them
-
Improving Thermal Interface Material (TIM) Thermal Testing Accuracy
Online Event, July 27, 2016 An introduction to DynTIM, Mentor Graphics’ simple yet
highly accurate solution for the measurement of the bulk
thermal conductivity coefficient of TIM materials.
-
FINE™/Turbo v11.1: new features webcast!
Online Event, July 27, 2016 Discover the new features of NUMECA’s CFD suite dedicated
to turbomachinery: FINE™/Turbo!
-
Steam and Combined Cycles Design online course- Softinway Inc. - TurboMachinery Mastered
Online Event, July 26, 2016 This online training course will teach the fundementals of
Steam and Combined Cycles using the AxCYCLE software.
-
TRAINING: Internal Combustion Engine Modeling in CONVERGE
Course, 6400 Enterprise Lane, Madison, United States, July 20, 2016 This two-day course offers an introduction to
CONVERGE v2.3 for
internal combustion (IC) engine modeling. You will
learn about the
CONVERGE solver and modeling options while working
through a
typical IC engine case from start to finish.
-
TRAINING: Surface Preparation with CONVERGE
Course, 6400 Enterprise Lane, Madison, United States, July 19, 2016 This course offers an introduction to surface
preparation in CONVERGE
Studio v2.3.
-
Live Webinar: FLOW-3D Cast v4.2
Online Event, July 19, 2016 Combining an intuitive, progressive user interface, FLOW-3D
Cast guides users to successful project setup with the
powerful FLOW-3D solver, delivering accurate predictions of
filling and solidification-related defects. Please join us
for a webinar on July 19 that will present the new models,
features and design workflows of FLOW-3D Cast v4.2.
-
11th ASMO UK/ISSMO/NOED2016: International Conference on Numerical Optimisation Methods for Engineering Design
Conference, Munich, Germany, July 18, 2016 Multi-disciplinary and adjoint-based design optimisation
methods are providing powerful and systematic model-based
processes for the optimisation of increasingly complex
engineering systems, including many important examples in
the aerospace and automotive industries.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, July 15, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
14th ERCOFTAC Osborne Reynolds Day, Manchester University
George Begg Building, Sackville St, University of Manchester, Manchester, United Kingdom, July 14, 2016 The Osborne Reynolds Oral and Poster PhD competitions offer
prestigious awards that celebrate the quality of students
and graduates who have been pursuing doctoral‐level research
across the broad domain of fluid mechanics including
turbulence, multi‐phase, stratified and free‐surface flows,
convective transport processes, combustion and acoustics.
Entry to both competitions is open to current and recent
PhD graduates from a UK university.
-
Thermodynamioc Cycle Design, Analysis, and Optimization with AxCYCLE - Softinway Inc.
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore, India, July 13, 2016 This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™. During this
interactive, hands-on workshop, engineers will use the
AxCYCLE™ software to successfully perform modeling and
simulation of thermodynamic cycles at design and off-design
conditions as well as undertake optimization tasks.
-
9TH INTERNATIONAL CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS
Conference, GRAND CEVAHIR HOTEL, ISTANBUL, Turkey, July 11, 2016 ICCFD, a biennial event, is the merger of two important
CFD conferences: the International Conference on
Numerical Methods in Fluid Dynamics, ICNMFD
(since 1969) and International Symposium on Computational
Fluid Dynamics, ISCFD (since 1985). The first ICCFD
conference was held in 2000 in Kyoto, the seventh in 2012
in
Hawaii, the eighth in 2014 in Chengdu, and the ninth
conference, ICCFD9, will be held in Istanbul, Turkey in
July 11-15, 2016.
-
International Conference on the Finite Volume Method
Conference, American University of Beirut, Beirut, Lebanon, July 11, 2016 The goal of this conference is to bring together
mathematicians, physicists,
and engineers interested in the developments and
applications of the finite
volume method.
-
Waste Heat Recovery Online Training Course- Softinway Inc.
Online Event, July 11, 2016 The objective of this course is to provide participants
theoretical and practical training on designing waste heat
recovery systems for improving energy efficiencies in
existing and new energy intensive systems. During this
course the participants will be exposed to design of systems
for waste heat recovery from low temperature sources.
-
International Workshop on the Physics of Compressible Turbulent Mixing
Conference, School of Aerospace, Mechanical and Mechatronic Engineering, Sydney, Australia, July 10, 2016 The 15th International Workshop on the Physics of
Compressible Turbulent Mixing (IWPCTM) brings together
researchers from universities and research laboratories
around the world to discuss the state-of-the-art in theory,
modelling, experiment and simulation of compressible and
variable-density turbulent mixing induced by hydrodynamic
instabilities in multi-material hydrodynamic flows.
-
IMA Conference on Turbulence, Waves and Mixing
Conference, United Kingdom, July 6, 2016 The theme of this conference is to discuss, with review
lectures and contributed papers, the ongoing developments
of research in ‘turbulence, waves and mixing’ and their
applications in industry, environment and geo/astro and
mathematical physics.
-
ThermaComp2016
Conference, Academy of medicine at Georgia Tech, Atlanta, United States, July 6, 2016 4th International Conference on Computational Methods for
Thermal Problems
-
8EPFDC
Conference, Faculty of Physics of University of Warsaw, 5 Pasteura Street, Warsaw, Poland, July 6, 2016 8 European Postgraduate Fluid Dynamics Conference
-
XFlow Public Webinar: XFlow/MSC.Adams Advanced Co-Simulations
Online Event, July 6, 2016 an XFlow Public Webinar about the co-simulation capability
between XFlow and MSC.Adams next July 6th 2016.
-
Organic Rankine Cycle Overview and Heat Balance Calculation
Online Event, July 5, 2016 Overview of the Organic Rankine Cycle and Heat Balance
calculation using AxCYCLE software
-
the 25th International Conference on Discrete Simulation of Fluid Dynamics (DSFD2016)
Conference, South University of Science and Technology of China, Shenzhen, China, July 4, 2016 It is a great forum for researchers on discrete simulation of
fluid dynamics.
-
Complete CFD Basics with Physical Significance and Mathematical Modelling using OpenFOAM
Online Event, July 3, 2016 This event will cover all the basic concepts in CFD
including turbulence modeling, Discretization of PDE, SIMPLE
Algorithms, Differencing Schemes and their Physical Significance
-
Weekend batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 02-July-2016
Course, Niharika Institute of Computational Engineering, New Thippasandra,HAL 3rd stage ,Bangalore, India, July 2, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on saturday 3 to 6 PM and Sunday 2to 5
PM.Total duration 2 Months.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, July 1, 2016 Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, July 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),Theory from 5 to 7 PM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, July 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Designing Under-Body Components Using Leading Wading Simulation Methods
Online Event, June 30, 2016 This webinar looks at water management tools focusing on
state-of-the-art vehicle wading simulations. Attendees
will gain a valuable understanding of leading simulation
methods within this vital design area.
-
Design Exploration with CFD for Better Dry Low NOx Hydrogen Gas Turbine Combustors
Online Event, June 28, 2016 In this webinar, you will hear from guest presenter Anis
Haj Ayed from B&B-AGEMA in Aachen, Germany, who is a
subject-matter expert in the use of CFD for leading-edge
GT combustion simulations. Anis will share the success
story associated with his company’s ability to discover
better designs, faster, ensuring the desired performance
of innovative Dry Low NOx (DLN) micro-mix hydrogen
combustors in modified gas turbines.
-
AxSTREAM Workshop
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore-560052, India, June 27, 2016 3-Day Training Workshop for Professional Designers, June 27
- 29, Banglore
-
Turbomachinery Design Traditional Onsite Classroom Course - AxSTREAM Workshop
Course, Flat No. 301, 3rd Floor, Royal Manor,, Bangalore, India, June 27, 2016 This training in a traditional classroom setting provides
participants with a practical understanding of the design
and optimization of flow paths for turbomachinery equipment
using AxSTREAM™. During this interactive, hands-on workshop,
engineers will use AxSTREAM™ software to successfully
perform preliminary design of turbomachinery flow paths,
inverse and direct 1D/2D analysis and optimization, 3D
profiling/stacking of the airfoils, 3D FEA and CFD, and
export of results to 3D CAD programs.
-
FLOW-3D Workshop for Water & Environmental Flows
Workshop, Red Lion Hotel on the River – Jantzen Beach, Portland, United States, June 27, 2016 Flow Science CFD Engineers will demonstrate water &
environmental simulation workflows by modeling two case use
examples: a power-plant effluent discharge and a
pump-station jet outflow. Key modeling features include open
channel free surface hydraulics, scour & sediment
deposition, and thermal plume analysis. This workshop will
be held on Monday, June 27 in conjunction with the 6th
International Symposium on Hydraulic Structures.
-
11th International OpenFOAM Workshop
Workshop, Guimarães, Portugal, June 26, 2016 Since its inception, in 2006, the OpenFOAM® Workshop is
attended by a large group of users and developers, both from
industry and academy, interested in the OpenFOAM®
-
Steam and Gas Turbine Design
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore-560052, India, June 25, 2016 Steam and Gas Turbine Design: 5-Day Training Course, Jun
25-29, Bangalore
-
Steam and Gas Turbine Design - Softinway Inc.
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore, India, June 25, 2016 The goal of this course is to provide engineers with a
better understanding of steam and gas turbines and help them
find new, more accurate, cost-saving solutions through
successful axial turbine design and operation tasks.
-
Second International Conference in Numerical and Experimental Aerodynamics of Road Vehicles and Trains (AEROVEHICLES 2)
Conference, Chalmers University of Technology, Gothenburg, Sweden, June 21, 2016 Second International Conference in Numerical and
Experimental Aerodynamics of Road Vehicles and
Trains(AEROVEHICLES2) will take place from 21 to 23 June
2016 in Gothenburg, Sweden.
-
Self Financed One Week Workshop on Computational Fluid Dynamics and Software Training
Workshop, Department of Mechanical Engineering, VNIT, Nagpur, India, June 21, 2016 Proposed workshop is based on most popular and widely
used CFD software - ANSYS FLUENT. 50% of the complete
training session will be dedicated for hands on training
to learn CFD through practice. The practical session will
be supported by strong theoretical training focusing on
CFD fundamentals to know behind the screen activities of
CFD software. This workshop is designed for UG/PG
students, research scholars and
faculty members of academic institutes.
-
Easy Design Engineering Simulation: Free ANSYS AIM Workshop
Workshop, Stockport, United Kingdom, June 21, 2016 Join our complimentary workshop on 21st June to see
first-hand how ANSYS AIM R17.1 can help you solve your
toughest structural or fluid flow design challenges in a
single, easy-to-use environment.
-
Three days online workshop on Ansys ICEMCFD HEXA
Online Event, June 20, 2016 Introduction to Geometry cleanup, Blocking,Hexahedral mesh
generation.Timings 9 Am to 3 PM (IST).
-
Short term course on Applied CFD and FEM
Course, IIT Mandi, Mandi, India, June 18, 2016 Engineers and students study lots of theory on Computer
Aided Engineering (CAE), specially on Finite Element Method
(FEM) and
Computational Fluid Dynamics (CFD) but when comes to the
application of theory in solving real world problems, they
either lack the skill and/or don’t know how to approach the
problem. Keeping this in mind, this course has been
designed to provide SKILL to the students/faculty/industry
engineers on industry standard tools and practices using
Applied CFD and FEM.
-
Workshop and course on Applied CFD and FEM
Workshop, IIT Mandi, Mandi, India, June 18, 2016 First time a 7-day workshop/course on CFD and FEM that
brings both the fields on plateform. The workshop involves
theory, hands-on and industry standard training. After the
training the participants will be able handle
multi-disciplinary problems
-
Weekend batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 18-June- 2016
Course, Niharika Institute of Computational Engineering, New Thippasandra,HAL 3rd stage ,Bangalore, India, June 18, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on saturday 3 to 6 PM and Sunday 2to 5
PM.Total duration 2 Months.
-
16th FLOW-3D European Users Conference
Conference, The Grand Hotel, Krakow, Poland, June 15, 2016 The 16th FLOW-3D European Users Conference will be held at
the Grand Hotel in Kraków, Poland, June 14-16, 2016. We
invite all FLOW-3D, FLOW-3D Cast and FLOW-3D/MP users and
those interested in learning more about our software
products to join us for a stimulating CFD conference.
-
Free NUMECA webinar FINE/Marine
Online Event, June 15, 2016 The overset grids technique removes the limits of the solid
bodies interaction
-
Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
Workshop, Fairfield Inn & Suites Montreal Airport, Montreal, Canada, June 15, 2016 Join us for this engineering workshop where we will
present the value of bringing CFD into your engineering
process and show the key capabilities for fluid flow and
heat transfer problems. We'll also give you the
opportunity to work with the software in our hands-on
session at the end of the day.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, June 15, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 4 hours
per
day.
-
Fluid Dynamics Workshop
Workshop, Kennispoort, Eindhoven, Netherlands, June 14, 2016 Fluid flow is involved in many engineering applications.
Discover the power of COMSOL Multiphysics for fluid dynamics
analysis and any multiphysics application involving fluid
flow in
this workshop.
Come and experience the power and efficiency of COMSOL
Multiphysics!
Date: March 24, 2016
Time: 13:00 - 16:00
Location: Eindhoven
For registration, please visit COMSOL website.
www.comsol.nl/events/id/61651
-
CFD Training - Workflow Process Optimization and Customization
Conference, The Grand Hotel, Krakow, Poland, June 14, 2016 Flow Science will be offering a free training for FLOW-3D
and FLOW-3D Cast users in conjunction with the 16th FLOW-3D
European Users Conference. The training will focus on
helping you increase efficiency, take advantage of
automation, extend functionality using customization, and
learn how to use active simulation control.
-
11th International SPHERIC (SPHERIC 2016) Workshop
Workshop, Argentina, June 13, 2016 The SPHERIC workshops are the only worldwide events which
exclusively focus on the Smoothed Particle Hydrodynamics (SPH)
methodology and related simulation approaches. SPH has recently
gained enhanced attention in the area of scientific computing.
Exemplary applications refer to the development of galaxies in
astrophysics, environmental engineering, applied solid
mechanics,
marine and coastal engineering, nuclear power engineering,
medical
engineering or geotechnical problems.
-
ERCOFTAC-LBM for Industrial Applications, ONERA, Paris, 13-14 June 2016
Course, ONERA, Paris, France, June 13, 2016 Lattice-Boltzmann Methods (LBM) became recently a very
powerful tool for engineering in Computational Fluid
Dynamics. They represent a very efficient competitor to
Mavier-Stokes based tools. This course aim at presenting the
fundamental of LBM, and state-of-the-art applications for
engineering problems issued from major industrial
companies(Airbus, Renault,...) Examples will illustrate
application in different fields: aerodynamics, acoustics,
and heat transfer.
-
ERCOFTAC - CFD for Dispersed Multiphase Flows, 13-14 June 2016, Kongsberg, Oslo, Norway
Course, Kongsberg, Asker-Oslo, Norway, June 13, 2016 The simultaneous presence of different phases in external or
internal flows such as gas, liquid and solid are found in
numerous industries, & termed multiphase flows. E.g. are
gas-liquid transportation, crude oil recovery, bubble column
reactors & spray for food processing. Existence of the
different phases requires a detailed understanding of the
interfacial transport phenomena. The course objective - a
BPG, latest trends & a trouble shooting session.
-
I Brazilian Congress of Computational Fluid Dynamics
Conference, Convention Centre - Garden Hotel, Campina Grande, Brazil, June 11, 2016 The CBCFD is the largest event in South America related
to computational fluid dynamics. It brings together
researchers, scientist and engineers from various fields
of CFD application. It is a unique opportunity to keep
up to date with the latest advances in the field of
numerical modelling of fluid flow.
-
Using CFD to Design More Efficient Combustion Systems
Online Event, June 9, 2016 By attending this webinar, you will learn how to model
reacting flows to accurately predict flame position,
fluid and wall temperatures as well as the production of
undesirable emissions such as NOx and CO associated with
combusting various types of fuels.
-
Modeling Remote Plasma Sources Webinar
Online Event, June 9, 2016 We would like to invite you to register for our
complimentary CFD Multiphysics Webinar on Modeling Remote
Plasma Sources.
-
Heatsink 101 - An Introduction to Heatsinks
Conference, United Kingdom, June 9, 2016 This seminar focuses on how heatsinks work and how to design
a heatsink while considering critical factors such as size,
airflow, cost and attachment methods.
-
Automotive Simulation World Congress
Conference, Munich, Germany, June 7, 2016 Simulation is now an indispensable part of vehicle
engineering. Car, truck and off-highway vehicle makers
and suppliers worldwide are accelerating innovation with
the help of simulation to make vehicles smarter,
autonomous, safer, cleaner and efficient. They gather
annually at the Automotive Simulation World Congress to
share latest advances, examples and best practices in the
use of simulation for automotive innovation.
-
The Virtual Refinery: An Introduction to CFD in Downstream (Refining and Petrochemical) Operations
Online Event, June 7, 2016 This webinar will introduce the role that CFD can play in
operating an efficient process and meeting environmental
regulations through better designs. Specific case study
examples of how it is being applied in refineries, and a
live demonstration of design space exploration of a
burner will also be provided.
-
5th European Seminar on Computing
Conference, Pilsner Urquell Brewery, Pilsen, Czech Republic, June 5, 2016 ESCO 2016 is the 5th event in a successful series of
interdisciplineary international conferences. It promotes
modern technologies and practices in scientific computing
and visualization, and strengthens the interaction between
researchers and practitioners in various areas of
computational engineering and sciences.
-
Discover Better Designs, Faster
Workshop, Whiteways Technical Centre, Enstone, United Kingdom, June 2, 2016 This event will show you how to take the fundamental step
into design exploration: directly linking CAD with CAE
simulation. Empower your company by reducing the time
spent manually building and testing virtual prototypes,
enabling engineers to focus their time on the results of
those analyses. Realize the value that comes from an
enriched understanding of your product and the design
space!
-
North American Vehicle CFD Conference
Conference, Detroit Marriott Livonia, Livonia, United States, June 2, 2016 We are pleased to invite you to our North American
Vehicle CFD Conference being held June 2 in the Metro
Detroit area. This complimentary event is a great
opportunity to meet with colleagues in the ground vehicle
industry, and your partners here at
CD-adapco® to discuss how CFD simulation is helping
engineers to Discover Better Designs, Faster.
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, June 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 4 hours
per
day.
-
CFD Course - Fluent, CFX, ICEM CFD
Course, online , Online , Denmark, June 1, 2016 This course is intended for the professionals / students
who are either novice in CFD or want to learn advanced
techniques in CFD field. We have designed this course, from
our 10 years industrial CFD experience, in such a way that
it will make a smooth and swift transition from very basics
to very advanced features.
-
Online and Offline Detailed CFD Training from Basics to Advanced Mathematical Modeling with OpenFOAM
Course, Chinchwad, Pune, India, May 28, 2016 This course is in offline and online mode. It covers all the
basic aspects including physics and mathematics in governing
equations and its applicability.
This course will be a complete guide for newbies in CFD and
OpenFOAM and will be an healthy review for intermediates and
expert CFD professionals.
Hurry up, only 15 seats remaining, give a token amount now
and book your seat.
For syllabus, please visit:
http://workshopwale.com/technical/weekend-batch-openfoam-salome-icemcfd.html
-
Complete CFD Training Sessions using OpenFOAM
Online Event, May 28, 2016 A complete training sessions, specially for fresh graduates
and newbies in CFD. The workshop will be organized in
Chinchwad, Pune.
100% Placement assistance will be given, so that fresh
graduated and newbies will be benefited. You can see more at
our homepage: www.workshopwale.com
-
Summer School in Computational Fluid Dynamics (CFD)
Course, Department of Mechanical Engineering, VNIT, Nagpur, India, May 26, 2016 Summer school will give a platform for the participant in
understanding CFD with well planned theoretical lectures and
hands-on-tutorials with commercial tools ANSYS.
The school will also facilitate to execute academic projects
at various stages: Project conceptualization; Literature
survey; Model and parameter selection; Geometry development;
Mesh generation; Simulation; Post-processing; Result and
data analysis; Report writing, etc.
-
Upcoming Webinar: AxSTREAM NET, New Thermal-fluid Flow Simulation Software for Secondary Flows
Online Event, May 26, 2016 AxSTREAM NET, a new thermal-fluid flow simulation
software and its application to gas turbine secondary &
cooling systems analysis & design.
-
TRAINING: Internal Combustion Engine Modeling in CONVERGE
Course, 6400 Enterprise Lane, Madison, United States, May 25, 2016 This two-day course offers an introduction to
CONVERGE v2.3 for internal
combustion (IC) engine modeling. You will learn about
the CONVERGE
solver and modeling options while working through a
typical IC engine
case from start to finish.
-
TRAINING: Surface Preparation with CONVERGE
Course, 6400 Enterprise Lane, Madison, United States, May 24, 2016 This course offers an introduction to surface
preparation in CONVERGE
Studio v2.3.
-
CFD in Naval Hydrodynamics, Off-Shore and Wave Modelling with OpenFOAM
Seminar, Southbank House, Black Prince Road SE1 7SJ, London, United Kingdom, May 23, 2016 1-day event on the use OpenFOAM and the Naval Hydro Pack for
CFD simulations in Naval Hydrodynamics, Off-Shore and Wave
Modelling with OpenFOAM.
-
Online training " Advanced CFD analysis,Ansys CFX,Fluent and ICEM CFD hexa)
Online Event, May 21, 2016 100 % Interactive live sessions through Skype and desktop
sharing.
Faculty profile in the below link,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
Timings: select one of the below slots,
1.Saturday and Sunday 9 Am to 12 IST
2.Monday to Friday 9 Am to 12 IST
Select a slot of your convenience.
24 sessions ,each session is 3 hours
-
Training Program on Computational Modelling with COMSOL Multiphysics
Course, Department Chemical Engineering, VNIT, South Ambazari-440010, Nagpur, India, May 21, 2016 Department of Chemical Engineering of Visvesvaraya
National Institute of Technology (VNIT), Nagpur, India is
conducting a short-term training program on
"Computational
Modelling with COMSOL Multiphysics" during 21-25 May
2016.
This training program is a combination of lectures,
demonstrations and case studies. The main emphasis
placed
on "learning by doing". The participants will get rich
hands-on experience on use of Comsol Multiphysics for
chemical engineering applications.
-
Oil, Gas and Chemical CFD Conference
Conference, Houston Marriott Westchase, Houston, United States, May 19, 2016 Whether it’s multiphase, flow induced vibration,
fluidization, erosion, reacting flows, heat transfer,
fluid structure interaction, CFD simulation presents many
benefits and challenges to the Oil, Gas and Chemical
industries. This conference acts as a venue for experts
from industry and academia to share experiences and
lessons learnt.
-
Aerospace Fuel System Modeling – Part 4
Online Event, May 19, 2016 In this web seminar, we will be using FloEFD 3D CFD to
perform flow analysis on a jet pump model and characterize
it for use in Flowmaster 1D CFD
-
Rotor Dynamics and Bearing Design
Course, 15 New England Executive Park, Burlington, United States, May 18, 2016 Rotor Dynamics and Bearing Design 3 Day Training Course, May 18
- 20, Boston MA
-
modeFRONTIER International Users' Meeting 2016
User Conference, Magazzino 42, TRIESTE, Italy, May 17, 2016 ESTECO and CPOMD are proud to announce the 7th edition of the
modeFRONTIER International Users' Meeting which will be held
on 17th-18th
May 2016 in Trieste. This biennial event, first run in 2004,
has proved to be a
key technology forum for all design optimization enthusiasts.
-
The Benefits of CFD in Process Industries
Workshop, Minneapolis Airport Marriott, Bloomington, United States, May 17, 2016 Join us for a free workshop that focuses on how
Computational Fluid Dynamics (CFD) can help you improve
some of your most common manufacturing processes.
-
Ten Full days course-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 14 to 23 rd may 2016
Course, Niharika Institute of Computational Engineering, New Thippasandra,HAL 3rd stage ,Bangalore, India, May 14, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes from 9 Am to 5 PM.
-
AxSTREAM Workshop
Course, 15 New England Executive Park, Burlington, United States, May 11, 2016 3-Day Training Workshop for Professional Designers, May 11-
13, Boston MA
-
CFMS DrivAer Automotive Workshop Event
Workshop, Bristol & Bath Science Park, Bristol, United Kingdom, May 10, 2016 The DrivAer Workshop event is focused on the automotive
sector and
targeted towards organisations who would like to assess
their own tools
and gain access to the DrivAer geometry that has been
de-featured for
CFD, access the meshes that have already been generated by
CFMS for
this test case in order to validate their own methods and
learn more
about the latest techniques and advances for meshing tools
-
Streamline your In-Cylinder Design Processes to Reduce Testing & Manual Analysis
Workshop, Courtyard Chicago Elmhurst/Oakbrook Area, Elmhurst, United States, May 10, 2016 Join us for a free workshop that focuses on how recent
developments in simulation software have improved the
automation process, allowing for increased fidelity of
virtual models and a decrease in the time and effort for
analysis. Presenters will look at optimization and design
exploration tools and how they can be applied to in-
cylinder applications, thermal management and coupling
ICE and powertrain simulations.
-
Centrifugal Compressor Design: 5-Day Training Course
Course, 15 New England Executive Park, Burlington, United States, May 9, 2016 Centrifugal Compressor Design: 5-Day Training Course, May 9
-13
-
Mini-Symposium on Flows over Non-Smooth Walls
Workshop, City University London, University building, room BLG07, London, United Kingdom, May 9, 2016 We, at the Turbulence and Flow Control Group of City
University London, are organising a mini-symposium on the
flows over non-smooth walls to be held on May 9.
Distinguished speakers from around the world will present
at this event that starts from 9am and lasts till 6pm.
Please look at the attached flyer and share it with your
colleagues who may be interested to attend. Use the
following link for registration and further information.
flows-over-non-smooth-walls
-
AxSTREAM Workshop
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore-560052, India, May 4, 2016 3-Day Training Workshop for Professional Designers - May 4
- 6, Bangalore
-
CONVERGE Combustion Summit
Seminar, Promenade des Anglais, 223, Nice, France, May 3, 2016 Combustion modeling will be discussed in detail along with
industry
needs and the needs of future models in order to increase
the impact of
CFD simulations. The talks and open forum will promote the
exchange
of ideas such that experts can learn from each other’s
processes.
Sessions will include speakers from industry, academia, and
research
facilities. A welcome dinner on the rooftop terrace will
take place on the
evening of May 3, followed by the summit on May 4.
|