-
AxSTREAM Workshop
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore-560052, India, May 4, 2016 3-Day Training Workshop for Professional Designers - May 4
- 6, Bangalore
-
CONVERGE Combustion Summit
Seminar, Promenade des Anglais, 223, Nice, France, May 3, 2016 Combustion modeling will be discussed in detail along with
industry
needs and the needs of future models in order to increase
the impact of
CFD simulations. The talks and open forum will promote the
exchange
of ideas such that experts can learn from each other’s
processes.
Sessions will include speakers from industry, academia, and
research
facilities. A welcome dinner on the rooftop terrace will
take place on the
evening of May 3, followed by the summit on May 4.
-
Workshop on Flow-Induced Noise and Vibration
Workshop, Minneapolis Airport Marriott, Bloomington, United States, May 3, 2016 We are pleased to invite you to a complimentary seminar
focusing on acoustic simulations. Attendees will discover
the benefits of using CFD simulation software to model
noise and vibration.
-
CFD & Tech 2016
Conference, Draria-Alger, Algeria, May 2, 2016 Computational Fluid Dynamics in energy production
engineering, nuclear thermal hydraulics, nuclear safety,
conversion energy equipments, fluid flow, heat transfer and
turbomachinery.
-
Turbocharger - May 2- 6 , Bangalore India
Course, Flat No. 301, 3rd Floor, Royal Manor, 70/10, Cunningham Road,, Bangalore-560052, India, May 2, 2016 Turbocharger Design and Performance Matching: 2-Day
Training Course
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 02 nd May 2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, May 2, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 4 hours
per
day.
-
Rotor Dynamics and Bearing Design - Online Training Course
Online Event, May 2, 2016 4 Day online training courses on Rotor Dynamics and Bearing
Design
-
Axial Compressor - Online Training Course
Online Event, May 1, 2016 8 Days online training courses on Axial Compressor
-
Online course on Advanced CFD analysis (Theory,Ansys Fluent,CFX and ICEM CFD Hexa),Saturday and Sunday batch
Online Event, May 1, 2016 Training mode: 100 % live interactive sessions through
skype, desktop sharing, very close to class room sessions.
Certificate: Industry recognized certificate will be
provided.
Batch commences from : 01-May-2016 ,Sunday
Timings: Based on Mutual convenience, between 9 AM to 7 PM,
IST,
Skype/desktop sharing sessions
-
Sunday batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 01st May 2016
Course, Niharika Institute of Computational Engineering, New Thippasandra,HAL 3rd stage ,Bangalore, India, May 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on Sunday from 9 AM to 3PM.Total duration
12 weeks.
-
Using Thermal Simulation to Address Challenges in Electronics
Workshop, Courtyard San Diego Sorrento Valley, San Diego, United States, April 28, 2016 This workshop will show how detailed CFD simulation and
design exploration can reveal secrets of system
performance and enable robust system design, so you, the
design engineer, can produce better designs, faster. The
tools and techniques that will be discussed apply whether
your design work focuses on component, board, or system
design.
-
AxCYCLE S-CO2 Cycles - Online Training Course
Online Event, April 26, 2016 4 Day online training courses on AxCYCLE S-CO2 Cycles
-
Using Thermal Simulation to Address Challenges in Electronics
Workshop, Courtyard Palo Alto Los Altos, Los Altos, United States, April 26, 2016 This workshop will show how detailed CFD simulation and
design exploration can reveal secrets of system
performance and enable robust system design, so you, the
design engineer, can produce better designs, faster. The
tools and techniques that will be discussed apply whether
your design work focuses on component, board, or system
design.
-
Modeling Complex Motions and Simulating Reality with Overset Mesh
Online Event, April 21, 2016 This webinar will provide an overview of the Overset Mesh
process and will cover various applications that can
benefit from this approach. The presenter will discuss
the workflow and will show practical examples
illustrating the usage of this powerful technology.
-
Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
Workshop, Courtyard Boston Cambridge., Cambridge, United States, April 21, 2016 Join us for this engineering workshop where we will
present the value of bringing CFD into your engineering
process and show the key capabilities of STAR-CCM+ for
fluid flow and heat transfer problems. We'll also give
you the opportunity to work with the software in our
hands-on session at the end of the day.
-
Join our free, live, online Rotor Dynamics Training Course Preview & Short Lecture
Online Event, April 21, 2016 Rotor Dynamics Training Course Preview & Short Lecture, on
April 21st 10 am EST.
-
Aerospace Fuel System Modeling - Part 3: Advanced Tanks, Venting & Inerting
Online Event, April 21, 2016 Learn how to model advanced fuel venting and inerting
systems in Flowmaster.
-
ERCOFTAC O&G - Modelling & Simulation: Best Practice & Tech Trend - 21-22 April 2016, Kongsberg, Oslo, Norway
Seminar, Kongsberg OGT, Asker-Oslo, Norway, April 20, 2016 Considering current oil prices, that languish between 2
bands, shale gas - upper band, and middle east oil - lower
band, the aim of the seminar is to support the digital
agenda forward, with a view to operational
excellence(safety, efficiency, and profitability). This is
where CFD-FEM has even more a huge role to play. The seminar
will focus on modelling and simulation advances in:
Multiphase Flows, Real-Time Sims, Risk and Safety, Subsea
Ops, and Machine Design.
-
AxSTREAM Training Workshop
Course, Baarerstrasse 2 – 6300 , Zug, Switzerland, April 20, 2016 3-Day Training Workshop for Professional Designers - April 20-
22, 2016
-
Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
Workshop, Courtyard Fort Meade BWI Bus. Dist., Annapolis Jct., United States, April 19, 2016 Join us for this engineering workshop where we will
present the value of bringing CFD into your engineering
process and show the key capabilities of STAR-CCM+ for
fluid flow and heat transfer problems. We'll also give
you the opportunity to work with the software in our
hands-on session at the end of the day.
-
Steam and Gas Turbine
Course, Baarerstrasse 2 – 6300 , Zug, Switzerland, April 18, 2016 Steam and Gas Turbine Design: 5-Day Training Course - April
18 - 22
-
Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
Workshop, Princeton Marriott at Forrestal, Princeton, United States, April 15, 2016 Join us for this engineering workshop where we will
present the value of bringing CFD into your engineering
process and show the key capabilities of STAR-CCM+ for
fluid flow and heat transfer problems. We'll also give
you the opportunity to work with the software in our
hands-on session at the end of the day.
-
17th Annual Internal Combustion Engine (ICE) Workshop
Workshop, The Inn at St. John's, Plymouth, United States, April 15, 2016 CD-adapco is pleased to announce the 17th annual Internal
Combustion Engine workshop being held on April 15 at the
Inn at St. John's in Plymouth, Michigan. This workshop is
a great opportunity to come together with colleagues in
industry, academia, and your partners at CD-adapco to
discuss the latest in the field of in-cylinder engine
simulation.
-
Time Changes All Things…Even Air Flow & Temperature
Online Event, April 14, 2016 This webinar will examine the meaning of time scales in
physical systems and the implications to electronics
cooling simulations. Both flow and thermal time scales
will be demonstrated through sample simulations along
with foundational calculations that help us understand
and predict transient situations.
-
Application-Oriented CFD for the Turbomachinery Industry
Workshop, Palm Beach Gardens Marriott, West Palm Beach Gardens, United States, April 14, 2016 Please join us for a free, one-day workshop on
"Application-Oriented CFD for the Turbomachinery
Industry" taking place in Palm Beach Gardens, Florida.
This event will provide an excellent opportunity for you
to see firsthand how flow and thermal simulation can
facilitate innovation and reduce development time and
costs.
-
Free Webinar - Rotor Dynamics Training Preview
Online Event, April 14, 2016 The session will include:
Short presentation of the contents of the full course
(classroom/online)
Detailed lecture of some specific aspects that are
discussed in the full class.
-
AxSTREAM Training Workshop
Course, 15 New England Executive Park, Burlington, United States, April 13, 2016 3-Day Training Workshop for Professional Designers
-
Expanding Horizons in Engineering Simulation of Fluid Flow & Heat Transfer
Workshop, Toronto Airport Marriott Hotel, Toronto, Canada, April 13, 2016 Join us for this engineering workshop where we will
present the value of bringing CFD into your engineering
process and show the key capabilities of STAR-CCM+ for
fluid flow and heat transfer problems. We'll also give
you the opportunity to work with the software in our
hands-on session at the end of the day.
-
Gompute User Meeting 2016
Conference, Gothenburg, Sweden, April 12, 2016 The Nordic Meeting for Technical & Scientific Computing
-
Using Engineering Software to Teach Heat Transfer
Online Event, April 12, 2016 In this webinar, Professor Milovan Peric, co-author of
Computational Methods for Fluid Dynamics, will
demonstrate how engineering software can be integrated
with traditional curriculum to improve the understanding
of conduction, radiation, convection and CHT. Real-world
course material includes heat transfer examples for both
solid and fluid flows.
-
Axial and Centrifugal Pumps
Course, 15 New England Executive Park, Burlington, United States, April 11, 2016 Axial & Centrifugal Pumps Fundamentals, Design &
Optimization – 5 Day Training
-
16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery
Conference, Honolulu, United States, April 10, 2016 Over thirty forums dealing with all aspect of design,
analysis and simulation of rotating
machinery. Forum 31 on Algorithm for High performance CFD
will focus on new
developments in CFD algorithms, models and numerics in the
field of turbo machinery
simulation. Papers addressing any these aspects are welcome.
The list of suggested
topics include CFD solvers and methods, Pressure and
density-velocity coupling algorithms, Immersed boundary
method, etc ...
-
The Engineering Simulation Show
Conference, The Roundhouse,, Derby, United Kingdom, April 7, 2016 Showcasing the latest technologies in CFD, FEA and
Engineering Simulation and Modelling
-
Free CFD Webinars using CONSELF Cloud CFD
Online Event, April 7, 2016 Series of 5 free Webinars in the following fields:
HVAC, Valves, Pumps, Wind Tunnel and Buildings.
We will show how easy is to complete a simulation with
CONSELF
Cloud CFD, directly in your browser on our Computing Cloud.
-
An Introduction to Open Source CFD Using OpenFOAM
Course, University of Strathclyde, Glasgow, United Kingdom, April 6, 2016 We present a 1-day training course as an introduction to
the OpenFOAM CFD software using a hands-on, applications-
based approach. Fee £200.
-
STAR Career Day
Seminar, Silver Cloud Hotel Eastgate, Bellevue, United States, April 5, 2016 By attending this student career event, you will gain
insight in the hiring process of industry leaders in
Aerospace, Ground Transportation, Enterprise Software,
and National Laboratories. Get a competitive advantage by
hearing a “Day in the Life” perspective from speakers
about engineering roles in their company. This event is
free but space is limited. Register today!
-
Discover Better Designs, Faster with an End-to-End Solution for Electric Machine Design
Online Event, April 5, 2016 This online event will demonstrate how our tools can be
efficiently used together as an end-to-end solution for
the design of modern electric machines. Presenters will
discuss the workflow for thermal and mechanical stress
management and the intelligent design of electric
machines. The event will also feature a live
demonstration of the thermal and electromagnetic
workflow.
-
NUMAP-FOAM Spring School 2016
Course, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia, April 4, 2016 Advanced School for Researchers using OpenFOAM
-
CONVERGE: Introductory and Advanced Topics
Course, Austria, April 4, 2016 Join us in Linz at Convergent Science GmbH for a
five day course that
will cover a variety of topics about CONVERGE v2.3.
Space is limited
and registration closes on March 31, 2016.
-
Simulation Methods Used for the In-flight Icing Certification of Aircraft, Rotorcraft and Jet Engines
Course, 3407 Rue Peel H3A 1W7, Montreal, Canada, April 4, 2016 The course covers the fundamentals of icing, the
certification process, and the role of CFD as an
increasingly acceptable means of compliance.
In the afternoon sessions, demonstrations are made using
FENSAP-ICE, and the course has proven to be an important
source of sales of the product, and a great forum for
potential users to interact and exchange points of view.
-
CFD analysis using Open FOAM
Online Event, April 4, 2016 Industry level course on OpenFOAM covering validation
problems on CFD analysis related to Turbomachines,
Aerodynamics, Heat transfer ,Gas dynamics.
-
Axial and Centrifugal Pumps - Online Training Course
Online Event, April 4, 2016 6 Day online training courses on Axial and Centrifugal Pumps
-
CFD analysis using OpenFOAM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 2, 2016 Training on OpenFOAM CFD software with real time problems on
CFD analysis.
Projects covering TurboMachine , Aerodynamics and Gas
Dynamics.Classes on Saturday and Sunday . Timings Saturday 3
to 6 PM , Sunday 10 AM to 1 PM. (Tentative).Total duration
four weekends.Course Fee is Rs.30000 (Thirty thousand rupees)
-
One Month Evening batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 01 st April 2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 4 hours
per
day.
-
A One Day Training Course - " Mixing In Stirred Tanks" - 31 March 2016, NJ
Course, Rutgers University Inn and Conference Center, New Brunswick, United States, March 31, 2016 The course will review principles of mixing in stirred
tanks, provide recommendations for process design and scale-
up, plus enable participants to apply these principles and
recommendations to their mixing processes/problems.
-
Webinar: Rapid design of Small Modular Nuclear Reactors (SMR)
Online Event, March 29, 2016 Join us on 29th March for an introduction to new
developments in systems simulation engineering. These
developments offer greatly reduced times for performing
typical design tasks required for Small Modular Nuclear
Reactor (SMR) projects.
-
Fluid Dynamics Workshop
Workshop, Provinciehuis Vlaams-Brabant, Leuven, Belgium, March 24, 2016 Fluid flow is involved in many engineering applications.
Discover the
power of COMSOL Multiphysics for fluid dynamics analysis and
any
multiphysics application involving fluid flow in this
workshop.
Come and experience the power and efficiency of COMSOL
Multiphysics!
Date: March 24, 2016
Time: 13:00 - 16:00
Location: Leuven
For registration, please visit COMSOL website.
www.comsol.nl/events/id/61651
-
Flow and Solids Simulation for Oil Sands
Workshop, Calgary Marriott Downtown Hotel, Calgary, Canada, March 22, 2016 CD-adapco invites you to a one-day workshop that will
provide you the opportunity to learn how engineering
simulation and design space exploration technology
benefits many aspects of oil and gas exploration,
production and processing. The oil sands industry will be
the specific focus of this event.
-
Aerospace Fuel System Modeling - Part 2 : Controls
Online Event, March 17, 2016 The second in our series on fuel system modeling showing the
development and basic use of a 1D system model of a
passenger aircraft fuel system through the addition of controls.
-
Attend NAFEMS CFD Seminar in Torino for FREE!
Seminar, NH Ambasciatori Hotel, Torino, Italy, March 16, 2016 NAFEMS Computational Fluid Dynamics in Engineering
Simulation Seminar will be held on 16th March in Torino,
Italy and registration is free of charge to both members
and non-members of NAFEMS.
The seminar will help CFD engineers and managers answer
questions on:
• How to improve simulation within the engineering
processes
• Best practice in engineering simulation
processes.
Please find further details and registration at
http://nafems.org/events/nafems/2016/italia_cfd/.
-
ESI's Visual-CFD: A Smarter Way of Working with OpenFOAM
Online Event, March 14, 2016 A Smarter Way of Working with OpenFOAM
-
Week end batch (Sunday only)-Advanced course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 13-March-2016 ,Sunday 9 AM
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 13, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.
Class timings: Sunday (9:00 AM to 3 PM), 12 weeks
-
Centrifugal Compressor Design 5-Day Training
Course, Boston, United States, March 6, 2016 This comprehensive course includes multiple topics,
starting with the basics of fluid dynamics and ending
with a detailed overview of multistage centrifugal
compressor design.
-
ECS - Thermal Management Challenges in Forced Convection Tablets
Online Event, March 3, 2016 Thermal design of forced convection tablets with FloTHERM XT
and T3Ster presented by Electronic Cooling Solutions.
-
Using CFD to Increase Yields in Fermentation Production Methods
Online Event, March 3, 2016 In this webinar, we will present several case studies, a
demonstration on G-L CFD simulation for mixing, effective
use of mesh type and bubble size distribution.
-
One Month Evening batch-Course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 01 st March 2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 4 hours
per
day.
-
One month course-Advanced course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 01-March-2016 ,Tuesday ,Evening batch
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.
Class timings: Evening(5:00 PM to 7 PM)
-
Rotor Dynamics and Bearing Design
Course, Boston, United States, March 1, 2016 This course covers rotor dynamics analysis and bearings
simulation for different types of rotors and bearings
(journal, gas, rolling elements). Rotor dynamics
fundamentals, basic design rules and analyses according
API and other standards, bearing simulation aspects and
more are explained.understanding of the design, analysis
and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
OpenFOAM Symposium at IIT Bombay
LCH, IIT Bombay, Mumbai, India, February 27, 2016 First OpenFOAM Symposium at IIT Bombay.The symposium aims to
provide a platform for OpenFOAM experts and beginner to
discuss and explore the capabilities of the software. Aimed
at establishing a OpenFOAM user community in India.
-
Master the Fastest Route from CAD to CFD
Workshop, Courtyard Kansas City Shawnee, Shawnee, United States, February 25, 2016 In this workshop, we will cover the latest surface
wrapping and meshing technologies that eliminate manual
repair from the CFD process. This assures a faster route
from CAD to flow simulation, and gives engineers the
opportunity to concentrate on engineering analysis.
-
Predicting the Real-World Performance of Your Products with Multiphase Simulation
Online Event, February 25, 2016 This webinar will provide attendees with an introduction
to multiphase modeling, the background and applicability
of each method, as well as some practical examples that
illustrate what can be achieved.
-
Aerospace Fuel System Modeling with Flowmaster - Part 1
Online Event, February 25, 2016 The first in a 3-part series showing the development and
basic use of a 1D system model of a passenger aircraft fuel
system.
-
CONVERGE: Applying High Performance Computing to Engine Design using Supercomputers
Online Event, February 25, 2016 Dr. Kodavasal will discuss work done at Argonne to develop both
capability and capacity computing for CONVERGE engine
simulations on
supercomputing platforms.
-
Webinar: How Simulation can improve Wind Microclimate Studies for Pedestrian Safety & Comfort
Online Event, February 25, 2016 Planning applications for large buildings in the urban
environment often require wind microclimate assessment.
Join our webinar on 25th February to learn more about
simulation-based assessment and how we can save you time
and money in preparing your planning application.
-
Simulation to Solve Changing Technology Demands of the Refining & Petrochemical Industries
Workshop, Houston Marriott Energy Corridor, Houston, United States, February 25, 2016 The refining and petrochemical industries are undergoing
tremendous change. All of this change results in the
demand for cutting-edge technology that can meet the
needs and reduce cost of production at the same time.
These issues will be discuss in this workshop - focusing
on the common challenges faced by the refining and
petrochemical industries.
-
Simulation for Marine Applications
Workshop, CD-adapco, Orlando, United States, February 25, 2016 Do you want to learn how Computational Fluid Dynamics
(CFD) can help improve your design process and achieve
better results? Would you like to understand how you can
reduce the need for towing tank testing by using CFD, or
explore new, advanced methods for using CFD to design
marine systems? If so, this is a workshop you shouldn't
miss.
-
Webinar: Improving Gas Turbine Combustor Performance through Full-Fidelity CFD Simulations
Online Event, February 25, 2016 In this webinar, combustion specialists and developers
will show how simulation software can be used to discover
better GT Combustor designs faster.
-
Efficient Urea/SCR Aftertreatment Design using CONVERGE and GT-SUITE
Online Event, February 24, 2016 Successful Urea/SCR system design requires capturing the
composition
and mixing upstream of the catalyst as well as the NOx
reduction reactions
that occur within the catalyst. CFD is the dominant tool for
simulating the
urea-water spray, filming, mixing and urea conversion
upstream of the SCR
catalyst.
-
Master the Fastest Route from CAD to CFD
Workshop, Indianapolis Marriott East, Indianapolis, United States, February 23, 2016 In this workshop, we will cover the latest surface
wrapping and meshing technologies that eliminate manual
repair from the CFD process. This assures a faster route
from CAD to flow simulation, and gives engineers the
opportunity to concentrate on engineering analysis.
-
CFD in the Marine & Offshore Design Process
Workshop, The Ritz-Carlton, New Orleans, New Orleans, United States, February 23, 2016 Are you involved in the design or operation of offshore
vessels or platforms? Or perhaps you would like to
understand how you can reduce the need for towing tank
testing by using CFD, or explore new, advanced methods
for using CFD to design energy efficient vessels? If so,
we are holding an educational seminar you shouldn't miss.
-
CFD in MATLAB - QuickerSim CFD Toolbox Workshop
Workshop, Warsaw, Poland, February 22, 2016 The workshop will be focused on efficient solving of CFD
problems (including nonlinear material models, heat
transfer, applications to teaching etc.) using a free of
charge QuickerSim CFD Toolbox for MATLAB.
-
AxSTREAM 3 Day Workshop
Course, Boston, United States, February 22, 2016 his training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
Combustion modelling in CFD (Gas Turbine domain)
Course, India, February 20, 2016 Online course on Combustion modelling in CFD.
Classes on Saturday and Sunday from 8 AM to 10 AM (IST) via
skype/desktop sharing.About 40 hours duration.
Syllabus available at http://www.nicecfd.com/syllabus.php?c_id=6
-
OpenFOAM® Stammtisch United 2017
Workshop, Universität Fachbereich 15 - Institut für Mechanik, Kassel, Germany, February 20, 2016 Der Stammtisch dient
als informelles Anwendertreffen und soll damit eine
Plattform zur Vernetzung und zum Austausch bieten.
-
Design of a Waste Heat Recovery System 5-Day Training
Course, Bangalore, India, February 20, 2016 The objective of this course is to provide participants
theoretical and practical training on designing waste
heat recovery systems for improving energy efficiency in
existing and new energy intensive systems.
-
Good (and bad) Vibrations: Designing for Flow Induced Vibration with Simulation
Online Event, February 16, 2016 This educational webinar will feature presentations from
Oil & Gas engineering and management consultants Norton
Straw and CD-adapco’s Oil & Gas technical specialist Alex
Graham. They will outline a typical FIV study: starting
with the EI guidelines, followed by CFD and FEA
simulations.
-
Webinar: Rapid Analysis and Design of Cooling Flow Paths for Turbine Machinery
Online Event, February 15, 2016 Join this webinar on 15th February to learn about new
developments in systems simulation engineering within the
field of turbine machinery offering rapid design of
cooling flow paths.
-
Discover Better Designs, Faster
Workshop, Courtyard Columbus Airport, Columbus, United States, February 11, 2016 This event will show you how to achieve the fundamental
step into design exploration, i.e. directly linking CAD
with CAE simulation.
Demonstrations will highlight a complete workflow from
automated meshing to our unique optimization algorithms
which enable CAE engineers to perform multiple
simulations seamlessly for robust design exploration and
critical optimization studies.
-
The What, Why and How of Simulating Joule Heating
Online Event, February 11, 2016 This web seminar will explore the physical phenomena of
Joule heating and present standard calculations that can
be used to predict the amount of heat dissipated based on
the electrical situation and conductor material. In
addition, options for modeling Joule heating in
engineering simulation will be shown through examples,
including a discussion of the different advantages and
disadvantages.
-
Topical Problems of Fluid Mechanics 2015
Conference, Dolejskova 5, Prague, Czech Republic, February 10, 2016 The aim of the conference is to discuss contemporary
problems of fluid mechanics and to bring out latest results.
Scope of the conference covers the whole field of fluid
mechanics. Papers on experimental, numerical and theoretical
investigations of problems in fluid mechanics are welcome.
Also reports on new mathematical and/or experimental
approaches to solution of fluid flow problems are of great
interest.
-
9TH INTERNATIONAL CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS
User Conference, SİDE HOTEL, ISTANBUL, Turkey, February 8, 2016 ICCFD, a biennial event, is the merger of two important
CFD conferences: the International Conference on
Numerical Methods in Fluid Dynamics, ICNMFD
(since 1969) and International Symposium on Computational
Fluid Dynamics, ISCFD (since 1985). The first ICCFD
conference was held in 2000 in Kyoto, the seventh in 2012
in
Hawaii, the eighth in 2014 in Chengdu, and the ninth
conference, ICCFD9, will be held in Istanbul, Turkey in
July 11-15, 2016.
-
Axial Compressor Design 5-Day Training
Course, Zug, Switzerland, February 6, 2016 This comprehensive course includes multiple topics,
starting with the basics of fluid dynamics and ending
with a detailed overview of multistage centrifugal
compressor design.
-
A Better Understanding of Particulate Flows and Fluid Flows
Online Event, February 4, 2016 Coupling Computational Fluid Dynamics (CFD) with Discrete
Element Modeling (DEM) is a powerful combination to
investigate the effects of particulate flows and fluid
flows.
This webinar will highlight how these technologies have
been applied to shorten product process development
cycles and reduce energy requirements.
-
Discover Better Designs, Faster
Workshop, Hartford Marriott Farmington, Farmington, United States, February 3, 2016 This event will show you how to achieve the fundamental
step into design exploration, i.e. directly linking CAD
with CAE simulation.
Demonstrations will highlight a complete workflow from
automated meshing to our unique optimization algorithms
which enable CAE engineers to perform multiple
simulations seamlessly for robust design exploration and
critical optimization studies.
-
Master the Fastest Route from CAD to CFD
Workshop, Courtyard Pittsburgh Arpt Settlers Ridge, Pittsburgh, United States, February 2, 2016 In this workshop, we will cover the latest surface
wrapping and meshing technologies that eliminate manual
repair from the CFD process. This assures a faster route
from CAD to flow simulation, and gives engineers the
opportunity to concentrate on engineering analysis.
-
Discover Better Designs, Faster
Workshop, Courtyard Philadelphia Willow Grove, Willow Grove, United States, February 2, 2016 This event will show you how to achieve the fundamental
step into design exploration, i.e. directly linking CAD
with CAE simulation.
Demonstrations will highlight a complete workflow from
automated meshing to our unique optimization algorithms
which enable CAE engineers to perform multiple
simulations seamlessly for robust design exploration and
critical optimization studies.
-
One Month Evening batch-Course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 01 st February 2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 1, 2016 Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 4 hours per
day.
-
Free CFD Toolbox for MATLAB - Online Course
Online Event, February 1, 2016 Online course on CFD simulations in QuickerSim CFD Toolbox
for MATLAB.
-
Subsea: Improving Safety and Mitigating Risk through Simulation
Workshop, Houston Marriott Energy Corridor, Houston, United States, January 28, 2016 The day's events will include guest presentations
discussing the use of simulation in real-world
engineering projects. Topics covered will include
Erosion, Thermal analysis, Flow-Induced and Vortex-
Induced Vibration, and Separators. We will have a demo
and hands-on session with STAR-CCM+®, CD-adapco's
flagship simulation tool.
-
GET FIRED UP! Combustion Simulation in the Process Industry
Online Event, January 28, 2016 In this webinar, you will learn the various ways to use
CFD simulation to improve and optimize combustion system
designs via validation and case studies. A technical
specialist will use state-of-the-art simulation software
to demonstrate the ease of use and set-up of
optimization/design space exploration of a combustion
simulation.
-
Webinar: Rapid gas turbine combustion chamber analysis and design using a system modelling approach
Online Event, January 26, 2016 Flownex invites you to an exciting introduction to new
developments in systems simulation engineering with in the
field of turbine combustion chamber analysis and design. We
invite you to a webinar where we will discuss the full cost,
risk and time saving advantages as well as the incredible
accuracy of the simulations.
-
How CFD Improves Propeller Performance for Efficient Ship Propulsion
Online Event, January 21, 2016 During this webinar, Wärtsilä Propulsion will show that
with the aid of CFD simulations of the propeller in
behind ship condition, a direct feedback loop has been
established to the propeller designers. In addition,
Lloyd’s Register will demonstrate how they use relatively
fast numerical methods for calculating the performance of
a propeller in the wake flow of a ship.
-
Exploring Effective Urea/SCR Aftertreatment CFD Simulations
Online Event, January 20, 2016 Are you getting the accuracy and speed you need from your
engine
aftertreatment simulations?
Join us for a webinar to find out how to eliminate user
meshing and take
advantage of a comprehensive CFD tool for urea/SCR design.
-
CFD in MATLAB - 2-Day course on QuickerSim CFD Toolbox
Course, Warsaw, Poland, January 20, 2016 The course will be focused on efficient solving of CFD
problems (including nonlinear material models, heat
transfer, applications to teaching etc.) using a free of
charge QuickerSim CFD Toolbox for MATLAB. Tips & Tricks and
many examples will be given.
-
Simulating Flow Induced Noise and Vibration for Accurate Modeling
Online Event, January 19, 2016 Presenters will cover how recent advances in hardware
performance, combined with newly developed methods in
simulation software and Vibro-Acoustic and Aero-Vibro-
Acoustic technology like wave6®, present new
opportunities. Attendees will learn how they can more
accurately model flow induced noise and vibration across
a broad frequency range.
-
First of their kind Gas Turbine Workshops in India - CFD Workshops
Workshop, CMR Institute of Technology No.132, AECS Layout, Kundalahalli,, Bengaluru, India, January 18, 2016 It consists of 3 workshops on CFD for Gas Turbines by Dr.
Bijay K. Sultanian, an international CFD expert & trainer.
-
Robust System Design with Simulation
Online Event, January 14, 2016 This seminar will explore the capabilities of simulation
software to identify families of feasible designs,
understand design sensitivities, and predict system
robustness. A specific electronics cooling example will
be optimized and tested for sensitivity and robustness
under varying manufacturing and usage scenarios to
produce a better design faster than ever before.
-
Flowing Matter 2016
Conference, Faculty of Engineering of the University of Porto, Porto, Portugal, January 11, 2016 This conference will serve as an important event to get the
three scientific communities involved in the COST Action
MP1305 closer to each other: complex fluids (suspensions,
granular materials, glasses, rheology), active matter
(biological and synthetic micro-swimmers, bird flocks,
insect swarms), and complex flows (turbulence, chaotic
flows). Contributions that cover interdisciplinary aspects,
i.e. that cross two or more areas are particularly encouraged.
-
Rotor Dynamics and Bearing Design - 3 Day Training Course
Course, 1500 District Avenue, Burlington, United States, January 1, 2016 This course covers rotor dynamics analysis and bearings
simulation for different types of rotors. Rotor dynamics
fundamentals, basic design rules and analyses according
API and other standards, bearing simulation aspects are
explained.
-
Thermal Simulation Workshop
Online Event, January 1, 2016 The SimScale Thermal Analysis Workshop is a free course
that teaches mechanical designers and engineers how to
use thermal simulation in the web browser for optimizing
cooling and heating processes for improved energy
efficiency and durability.
|