-
Introduction to CFX 5
Course, 4601 Creekstone Drive, Durham, United States, February 15, 2005 This four day course will introduce users to CFX 5 in the ANSYS Workbench Environment. Topics include parametric modeling, CAD interoperability and geometry simplification using ANSYS Design Modeler, creating CFD specific meshes in ICEM CFD and CFX Mesh and performing fluid flow and heat transfer analyses using CFX5.
-
Simulating Fluid-Structure Interaction with ABAQUS and FLUENT
Online Event, February 15, 2005 Please join us for this online event February 15, 2005 at 4:00 p.m. EST. A second time is also offered on February 17, 2005 at 9:00 a.m. EST.
This web seminar will provide an overview of the FSI capability in ABAQUS, highlighting the following topics:
1. Evaluating your FSI applications
2. Setting up joint ABAQUS-FLUENT FSI problems
3. Co-simulation strategies
4. Examples of FSI with ABAQUS and FLUENT
-
FEMLAB Intensive Module at the University of Sheffield
Course, Chemical Engineering Building, Sheffield, United Kingdom, January 31, 2005 I plan on running Process Modelling and Simulation with FEMLAB for
the sixth time 31 January 2005 to 3 February 2005 at the University
of Sheffield. This module is intended to introduce how to build models in FEMLAB with case studies and many "tricks of the trade." The module uses the only academic textbook on FEMLAB programming, authored by the instructor.
-
Road Vehicle Aerodynamics
Course, Belgium, January 31, 2005 Vehicle aerodynamics is one of the most interesting areas of fluid dynamics today, specially for automotive industry people.
-
Fluent Presents: Large Eddy Simulation for Engineering Applications
Online Event, January 20, 2005 Please join Dr. Sung-Eun Kim, Principal Engineer at Fluent Inc. for an online seminar discussing how to maximize accuracy and minimize cost in using Large Eddy Simulation and Detached Eddy Simulation for engineering applications. This online seminar will take place on January 20, 2005 at 2 p.m.
-
Introduction to Computational Fluid Dynamics
Course, Belgium, January 17, 2005 This course is intended to provide the basic information required to initiate research or applications in most of the important domains of computational fluid dynamics.
-
43rd AIAA Aerospace Sciences Meeting and Exhibit
Conference, Reno Hilton, Reno, United States, January 10, 2005 The Aerospace Sciences Meeting is the
largest of the AIAA technical conferences and one of the preeminent technical gatherings within the
entire spectrum of aerospace activities.
-
Effective Use of the CFD General Notation System (CGNS) for Commercial and Research Applications
Course, Grand Sierra Hotel, Reno, United States, January 5, 2005 CFD General Notation System (CGNS) has developed into a
popular standard for the storage and exchange of CFD data in
the aerospace community. This course is ideal for commercial
and research CFD users involved in the development of CFD
tools including mesh generators, solvers, or post-
processors.
-
Effective Use of the CFD General Notation System (CGNS) for Commercial and Research Applications
Course, Grand Sierra Resort Hotel, Reno, United States, January 5, 2005 This course will
introduce the participants to CGNS, the data format, the
standard, and the software implementing the standard.
Additionally participants will be provided comprehensive
information for integrating CGNS into their applications.
-
Adaptive Grid Methodologies for Environmental Modelling
Workshop, Centre for Mathematical Sciences, Cambridge, United Kingdom, December 16, 2004 A one-day event on Adaptive Grid Methodologies
for Environmental Modelling for large-scale atmosphere/ocean
applications
-
31st National Conference on Fluid Mechanics & Fluid Power, Jadavpur University, Kolkata, IndiaI
Conference, Jadavpur University, Kolkata 700032, India, December 16, 2004 Jadavpur University hosts the 31st National Conference on Fluid Mechanics and Fluid Power 2004 to disseminate scientific and technical information of interest to the scientists and industrialist in the related fields. The conference further aims at exchanging ideas and views amongst various researchers and scientists in various branches of theoretical and experimental fluid mechanics and fluid power.
-
Engineering Expo 2004
Ahemdabad Education Society Ground,, Ahmedabad, India, December 15, 2004
-
Adaptive Grid Approaches for Fluid Dynamics Applications
Course, Centre for Mathematical Sciences, Cambridge, United Kingdom, December 14, 2004 A two-day event on Adaptive Grid approaches covering structured and unstructured methodologies
-
IUTAM Symposium on Laminar-Turbulent Transition
Conference, Jawaharlal Nehru Centre for Advanced Scientific Research, Bangalore, India, December 13, 2004 The dynamics of transition from laminar to turbulent flows remains to this day a major challenge in theoretical and applied mechanics. A series of IUTAM symposia held over the last twenty five years has proved to be a great catalyst which has given a boost to research and our understanding of the field.
The sixth meeting in the series is being held in Bangalore, to discuss progress after the last meeting in 1999 and chart out important future directions.
-
Cutting Edge Meshing & Optimisation for CFD
Seminar, BAR F1 Team Operations Centre, Brackley, United Kingdom, December 8, 2004 Mesh Generation tool GRIDGEN and CFD Optimisation tool SCULPTOR will both be showcased with presentations from end-users & developers. GRIDGEN'S automatic creation of grids using scripting will be highlighted together with SCULPTOR's unique ability to optimise the geometry without the need to remesh. The presentations will contain applications in the Formula 1 and the Marine industry.
There will be also be a tour of the BAR F1 Operations Centre. Only industrial users of CFD can register.
-
2004 International Mechanical Engineering Conference
Conference, Kuwait, United Arab Emirates, December 5, 2004 The conference will be covering all the mechanical engineering topics
such as fluid mechanics, CFD, heat transfer, energy, automotive, desalination, hvac,
materials, process engineering, manufacturing, combustion, dynamic systems, environment,
engineering management and education.
-
Ansys: An Introduction to Computational Fluid Dynamics modelling and applications
Seminar, Cambridge, Birmingham, Bristol, Leeds, London, United Kingdom, November 30, 2004 These seminars will provide an overview of Computational Fluid Dynamics and its application in industry to investigate fluid flow and heat transfer. They are aimed at engineers, scientists and researchers who would like to know more about the use and benefits of CFD.
-
ANSYS CFD Software Featuring ICEM CFD, CFX-4 and ANSYS DesignModeler
Seminar, Cambridge, Sutton Coldfield, Bristol, Leeds, London, United Kingdom, November 30, 2004 These seminars will provide a detailed technical overview of the full range of ANSYS CFD software and its technology, as well as software demonstrations. They are aimed at engineers, scientists and researchers already involved in CFD who are interested in the capabilities of ICEM CFD, CFX-5 and ANSYS DesignModeler.
-
Trends and Best Practice at the CAD/CFD Interface
Seminar, Coventry, United Kingdom, November 24, 2004 This seminar aims to review the evolving CAD/CFD interface in order to identify basic strategies that are available to users and also to disseminate best practice. The seminar will examine the major trends within the industry. The issue of CAD will be viewed in a broad sense and will encompass a full range of inputs that are in the CFD process.
-
PHOENICS Training Course
Course, CHAM Ltd, 40 High Street, Wimbledon Village, London, United Kingdom, November 23, 2004 3-day training course for new release of PHOENICS, PHOENICS-3.6.0
-
International Conference of Computational Methods in Sciences and Engineering 2004 (ICCMSE 2004)
Conference, HOTEL MARE NOSTRUM (CLUB MED), Vravrona, Attica (Near to International Athens Airport), Greece, November 19, 2004 There is permanently a need in Computational Science and Engineering for the advancement of information exchange. This practice should be expressed by an interdisciplinary and multidisciplinary conference on Computational Methods in Sciences and Engineering. ICCMSE 2004 aims at playing the above role and for this reason the aim of the conference is to bring together computational scientists and engineers from several disciplines in order to share methods, methologies and ideas.
-
Ansys: Design and Analysis of Rotating Machinery
Seminar, 60 Middle Quarter Mall, Woodbury, United States, November 19, 2004 Demonstrate the application of ANSYS/CFX tools to efficiently design and analyze pumps, compressors, and other types of rotating machinery.
-
Fluent Webinar: CFD Modeling of Mercury Capture
Online Event, November 18, 2004 Fluent is pleased to announce an online seminar featuring mercury capture technology for the power generation industry. The event, scheduled for November 18, at 2 p.m., is jointly hosted by Fluent Inc., the U.S. Environmental Protection Agency, the National Energy Technology Laboratory, and ADA Environmental Solutions Inc.
-
Ansys: Design and Analysis of Rotating Machinery
Seminar, 1001 Frontier Rd, Suite 300, Bridgewater, United States, November 16, 2004 Demonstrate the application of ANSYS/CFX tools to efficiently design and analyze pumps, compressors, and other types of rotating machinery.
-
Optimization Methows & Tools for Multi-Criteria/Multidisciplinary Design - Applications to Aeronautics and Turbomachinery
Course, Rhode-St-Genese,1640, Belgium, November 15, 2004 This course will give a comprehensive state of the art on deterministic as well as evolutionary multicriteria/multidisciplinary optimization methods and their use for design in research and industrial environments in Aeronautics and Turbomachinery.
-
Symposium on Advanced Turbulence Modeling for Industrial CFD
Conference, Mar Hotel, Recife, Brazil, November 10, 2004 The purpose of this symposium is to bring together researchers in the field of Turbulence Modeling to evaluate recent progresses, anticipate future modeling requirements and preview future research directions. Emphasis will be given to applications and solution of Industrial Problems. Authors are invited to participate in this event to expand national cooperation, understanding and dissemination of recent advances in the general area of Turbulence Modeling.
-
Ansys: FEA and CFD for Civil/Structural Engineering
Seminar, 536 LaGuardia Place, New York, United States, November 10, 2004 This seminar will discuss the latest features and benefits of ANSYS and ANSYS/LS-DYNA finite element-based stress analysis tools along with ANSYS/CFX computational fluid dynamics software applied to Civil-Structural engineering.
-
Next Generation CFD with STAR CCM+ Sponsored by Renault F1 Team
Seminar, Renault F1 Team, Enstone, United Kingdom, November 4, 2004 The CD adapco Group would like to invite you to attend an exclusive one-day workshop at the home of Formula One's most exciting team.
-
Automatic Differentiation Workshop
Conference, LD454, College Lane Campus, University of Hertfordshire, Hatfield, United Kingdom, November 4, 2004 This 2-day workshop is the latest in a series that provides a forum for the presentation of theoretical developments in and applications of Automatic Differentiation (AD) and adjoint methods.
-
CFD in Biomass Combustion
Course, Aalborg, Denmark, October 25, 2004 The primary objective is to present state-of-the-art models in the area of solid fuel combustion, with special focus on biomass fuels, and give practical examples of their application. The use of CFD, as a tool to transfer knowledge from basic research to end-users in industry, will be the overall theme.
-
Fluent Presents Fan & Blower Design Webinar
Online Event, October 21, 2004 Please join Fluent Inc. and its partners Concepts NREC and
Engineous Software for the second in Fluent's Turbomachinery
Webinar Series; Fan and Blower Design, on Thursday, October
21, 2004 at 2:00 pm ET.
-
Fluent Webinar: Simulation Process and Data Management
Online Event, October 14, 2004 Fluent Inc. invites you to attend the next in our online
seminar (webinar) series, Thursday, October 14, 2004 at 2:00 pm ET, on Simulation Process and Data Management. Presented by Enductive Solutions and featuring this event's partner, Bdrive.
-
5th MIRA International Vehicle Aerodynamics Conference
Conference, Heritage Centre, Gaydon, United Kingdom, October 13, 2004
-
CFD for Turbomachinery Design Course
Course, 217 Billings Farm Rd., White River Jct., United States, October 12, 2004
-
Critical Issues for Developing & Financing a US LNG Receiving Terminal
Seminar, Le Parker Meridien Hotel,118 West 57th Street, NY, United States, October 7, 2004 This event will provide a review of the critical issues surrounding the development and financing of a US LNG receiving terminal. Event Date: October 07, 2004, New York.
-
Advanced CFD Technologies Featuring ANSYS ICEM CFD and CFX
Seminar, Alafaya Corporate Center, 2000 North Alafaya Trail, Orlando, United States, October 6, 2004
-
7th Symposium on Overset Composite Grids & Solution Technology
Conference, Boeing Conference Center, Huntington Beach, United States, October 5, 2004 The Overset Symposium is a bi-annual event that bring together people using the overset or chimera grid solution methodology. The overset approach uses a set of overlapping grids to discretize a domain and is widely used to reduce the complexities of grid generation and to accomodate bodies with relative motion. The symposium brings together theorists, developers, and end users.
-
Introduction to Measurement Techniques
Course, Rhode-St-Genese,1640, Belgium, October 4, 2004 The aim of this Lecture Series is to provide basic knowledge about the measurement techniques currently used in fluid dynamics (pressure & temperature measurements, hot wire, optical techniques
-
SAE 2004 World Aviation Congress & Display
Conference, United States, October 1, 2004 Covers most aspects of civil and military aviation. Usually has a couple of CFD sessions.
-
Fluent and Engineous Software Present: Process Optimization with CFD Webinar
Online Event, September 30, 2004 Please join Fluent Inc. and Engineous Software for a one
hour online seminar (webinar) at 2:00 pm EST on September 30, 2004 to learn about tools that will help you automate your designs and processes. There is no cost to attend this presentation.
-
Fluent CFD Conference, Germany
User Conference, NH Hotel, Bingen am Rhein, Germany, September 29, 2004
-
STAR-CD French User Conference
User Conference, France, September 28, 2004
-
CTAC 2004 - The 12th Biennial Computational Techniques and Applications Conference
Conference, The University of Melbourne, Melbourne, Australia, September 27, 2004 A forum on the development and use of computational methods applied to engineering, scientific and other problems. Papers will be in the areas of computational mathematics; development and application of numerical algorithms; numerical modelling of scientific, technical and industrial applications; high performance computing; and other aspects of the computational sciences.
-
Fluent Presents: A Taste of FLUENT
Seminar, 7150 Riverwood Drive, Suite J, Columbia, United States, September 27, 2004 Please join us for a very special seminar, a Taste of FLUENT, being held from 9:30am - 6:00pm, September 27, in the Baltimore, MD area at Training Etc, Inc., 7150 Riverwood Dr., Suite J, Columbia, MD.
-
Fluent Presents Naval/Ocean Engineering Webinar
Online Event, September 23, 2004 Fluent Inc., the worldwide leader in computational fluid dynamics (CFD) software and services, presents a Naval/Ocean Engineering Webinar on Thursday, September 23, 2004, at 2 p.m.
-
3rd Intl. Symposium on Two-Phase Flow Modelling and Experimentation
Conference, Pisa, Italy, September 22, 2004 Brings together researchers, designers, experimentalists, modellers, and numerical analysts active in the area of two-phase and multiphase flow, to present the state-of-the-art, to exchange their expertise and experiences.
-
User Conference, Summit Executive Centre, Chicago, United States, September 20, 2004
-
Advanced CFD Technologies Featuring ANSYS ICEM CFD and CFX
Seminar, 5000 Technology Drive, Technology Hall, Room S-105, Huntsville, United States, September 15, 2004
-
3rd International Conference on Boundary Integral Methods: Theory and Applications
Conference, Brunel University, London, United Kingdom, September 14, 2004 The meeting will provide a forum for the exachange of ideas
between academic and industrial researchers in different
disciplines whose common interest is boundary integral methods.
-
Conference, Bruxelles, Belgium, September 14, 2004
-
Advanced CFD Technologies Featuring ANSYS ICEM CFD and CFX
Seminar, 14900 Sweitzer Lane, Suite 202, Laurel, United States, September 14, 2004
-
Course, Karlsruhe, Germany, September 13, 2004
-
ERCOFTAC Special Interest Group 5 Second Workshop on "Urban Scale CFD"
Workshop, School of Civil Engineering, Nottingham, United Kingdom, September 9, 2004 This event aims to review and further discuss the challenges met across the scales in modelling urban environments with CFD. Scales will start at the individual building scale, move on to consider groups of buildings, street canyons and will extend to cities, forests and ABL models. A lead speaker will launch the each workshop session, each of which will then be open to delagates presentation and the floor. Finally the views of a reknowned experimentalist will "close" the event.
-
Summer School on Computational Fluid Mechanics
Course, Campus Golm, Potsdam, Germany, August 23, 2004 The Summer School 2004 we will examine the use of supercomputational simulations for rotating fluids and address related engineering problems.
-
Fluent Pump Design & Analysis Webinar
Online Event, August 19, 2004 Please join Fluent Inc. and its partners Concepts NREC and
Engineous Software for the first in Fluent's Turbomachinery
Webinar Series; Pump Design and Analysis Webinar on
Thursday, August 19, 2004 at 2:00 pm ET.
-
XXI International Congress of Theoretical and Applied Mechanics
Conference, Warsaw University of Technology, Warsaw, Poland, August 15, 2004 A large interdisciplinary conference covering both solid mechanics and fluid dynamics, including CFD.
-
11th Taiwan National Computational Fluid Dynamics Conference
Conference, Chih-Pen, Taitung, Taiwan, August 5, 2004 This is the 11th National conference on CFD organized by Chung Hua University, Hsin-Chu, Taiwan. 3 international Keynote speakers and 9 session invited speakers are invited
on the areas of Multi-scale Modelling, Applied CFD in Electro-Mechanics and Applied CFD in Bio-Medical Fluids.
The conference date are Aug. 5-7, 2004.
-
5th International Bi-Annual ASME/JSME Symposium on Computational Technology for Fluid/Thermal/Chemical/Stressed Systems
Conference, Hyatt Regency La Jolla at Aventine, San Diego (La Jolla), United States, July 25, 2004 Industrial application of CFD ("building better
products with CFD") requires the solution of complex fluid-flow problems in conjunction with equipment design, process and product development and optimization. This symposium addresses these issues by focussing on computational
modeling of industrially relevant fluid flows in interaction with participating media and physical/chemical phenomena.
-
ECCOMAS 2003 - 4th European Congress on Computational Methods in Applied Sciences and Engineering
Conference, Finland, July 24, 2004
-
Advanced CFD Methodologies For The Offshore and Marine Industry
Course, Houston, United States, July 13, 2004 A 3-Day intensive course on the 'Application of Advanced Computational Fluid Dynamics Tools to the Offshore and Marine Industries'.
-
2004 Workshop on MRI of Flow and Motion: Developments & Applications in Measurement and Modelling
Workshop, University Hospital Zurich, Zurich, Switzerland, July 11, 2004 To further the understanding and application of the flow and motion measurement capabilities of magnetic resonance to a wider audience by bringing together specialists in the acquisition of MR flow data, flow simulation and clinical applications of flow and motion data.
-
Unsteady Combustion: Transport Penomena, Chemical Reactions, Technical Systems
Workshop, Karlsruhe, Germany, July 8, 2004 International workshop on unsteady combustion.
Presentation of results from Collaborative Research Center 606 (SFB 606).
Recognized international experts as invited speakers.
Subtopics are unsteady kinetics, ignition of hydrocarbons pollutants, mixture formation, flame propagation, combustion instabilites, combustion in DI engines
-
QIRT 2004
Conference, Belgium, July 5, 2004 The Quantitative Infrared Thermography (QIRT) conference is an international forum, which brings together specialists from industry and academia, who share an active interest in the latest developments of instrumentation and experimental practices related to infrared thermography.
-
Populations Balance Methods in Computational Fluid Dynamics
Course, Aalborg University Esbjerg, Esbjerg, Denmark, June 28, 2004 The course will deal with effective methods to predict particle size distributions by using the PBE and computational fluid dynamics (CFD). In particular the Quadrature method of moments (QMOM) and the Direct Quadrature method of moments (DQMOM) will be treated. Also some description of Classes Methods (CM) will be given.
-
Fluent Inc. Presents LED Webinar
Online Event, June 23, 2004
-
Advances in Turbulence Modelling with Applications in External Aerodynamics, Heat Transfer and Turbomachinery
Seminar, The Oxford Holiday Inn Express (Kassam Stadium), Grenoble Road, Oxford, OX4 4XP, United Kingdom, June 23, 2004 Dr Florian Menter will prvoide a two hour presentation on the following topics:
- A new correlation-based laminar to turbulent transition model based on local variables
- Detached Eddy Simulation using a zonal method
- Reynold Stress Models based on omega equation
- Scalable wall functions
- SST with automatic near wall detection
-
Technical Overview of the CFX-5 Solver
Seminar, The Oxford Holiday Inn Express (Kassam Stadium), Grenoble Road, Oxford, OX4 4XP, United Kingdom, June 23, 2004 Dr Georg Scheuerer will provide a 75 minute presentation on the following topics:
- AMG coupled solver algorithms
- Finite element based control volumes
- High resolution discretisation schemes
- Treatments for high Mach number flows
- Parallel processing
- Generalised grid interfaces
- Multiple frames of reference
- Moving mesh
- Fluid structure interaction
- Physical models
-
New Features and Capabilities of ICEM CFD Version 5.0
Seminar, The Oxford Holiday Inn Express (Kassam Stadium), Grenoble Road, Oxford, OX4 4XP, United Kingdom, June 23, 2004 David Minns will provide a 75 minute presentation on the new features and capabilities being released in version 5.0 of ICEM HEXA and ICEM TETRA
-
Seminar, Germany, June 8, 2004
-
CFD-2004 IBCAST, PAKISTAN
Conference, PC BHURBAN, MURREE, Pakistan, June 7, 2004 In the present CFD Symposium 2004, deliberations are to be made in the areas of CFD algorithms, grid generation techniques, computational aerodynamics application and fluid structure interactions for marine structures and loading on airframes.
-
Stochastic Analysis Tutorial Workshop at Laramie
Workshop, Ross Hall, Department of Mathematics, University of Wyoming, Laramie, United States, June 7, 2004 This is a tutorial workshop to introduce theoretical and computational aspects of stochastic analysis to newcomers.
-
ICMF-2004: International Conference on Multiphase Flow
Conference, Pacifico Yokohama, Yokohama, Japan, May 31, 2004 The aim of this conference is to bring together researchers from all countries and from all disciplines and applications involving multiphase flow, to promote the exchange of new ideas, results and techniques.
-
Modelling Oil & Gas Applications using CFX-5
Seminar, Antwerp, Belgium, May 26, 2004 This one day CFD seminar gives examples of how CFX has been successfully applied to projects ranging from offshore/exploration studies downstream to complex refinery processes.
-
Modelling Oil & Gas Applications using CFX-5
Seminar, Rotterdam, Netherlands, May 25, 2004 This one day CFD seminar gives examples of how CFX has been successfully applied to projects ranging from offshore/exploration studies downstream to complex refinery processes.
-
LinuxWorld Singapore 2004
Conference, Suntec Singapore, Singapore, May 25, 2004 LinuxWorld Conference & Expo is a leading gathering place for anyone and everyone interested in Linux and Open Source Technologies. At LinuxWorld, you can see the latest technology developments in practice, speak with leading minds in the open source movement, network with your peers to discuss how to best leverage the technology for your organisation.
-
Fluent Webinar - Modeling Boiling and Multiphase Flows with CFD
Online Event, May 25, 2004
-
2004 International ANSYS Conference
User Conference, Pittsburgh Hilton and Towers, Pittsburgh, United States, May 24, 2004 Profiting from Simulation: Business and Technical Leadership through Simulation Driven Design
This event will bring together managers, engineers and analysts worldwide from all disciplines of computer-aided engineering.
ANSYS, ICEM CFD and CFX-related technical papers are being accepted. The technical paper portion of the conference provides users the opportunity to tell their story to colleagues and showcase their organization.
-
Modelling Oil & Gas Applications using CFX-5
Seminar, London, United Kingdom, May 21, 2004 This one day CFD seminar gives examples of how CFX has been successfully applied to projects ranging from offshore/exploration studies downstream to complex refinery processes.
-
Fluent Inc - Particle Size Distribution/Crystallization Webinar
Online Event, May 21, 2004 Please join Fluent Inc. and Dr. Allan Myerson,
Philip Danforth Armour Professor of Engineering
and Provost at the Illinois Institute of Technology,
May 21, 2004 at 2:00 EST for this online seminar on
calculating PSD coupled with fluid mechanics, with a
focus on crystallization processes.
This webinar is limited to attendees from the US and Canada only.
-
Modelling Oil & Gas Applications using CFX-5
Seminar, Hull, United Kingdom, May 19, 2004 This one day CFD seminar gives examples of how CFX has been successfully applied to projects ranging from offshore/exploration studies downstream to complex refinery processes.
-
Modelling Oil & Gas Applications using CFX-5
Seminar, Aberdeen, United Kingdom, May 18, 2004 This one day CFD seminar gives examples of how CFX has been successfully applied to projects ranging from offshore/exploration studies downstream to complex refinery processes.
-
Immersive Projection Technology 2004
Workshop, Hoover Hall, Iowa State University, Ames, United States, May 13, 2004 The workshop will highlight new and unique work in projection-based immersive environments for virtual reality applications.
-
CFD High-Performance Computing Environment
Course, Carleton University, Ottawa, Canada, May 12, 2004 1. Parallel Computing Explained
2. Introduction to Parallel Programming using MPI
3. Intermediate MPI + MPI-2
4. Multi-level Parallel Programming
5. Applications in CFD
Each module, where applicable, begins with a list of objectives, includes an introduction that describes the best suited applications or algorithms, and denotes typical uses, detailed descriptions of routines, lots of examples, and ends with a test that relates back to the objectives.
-
LinuxWorld Malaysia 2004
Conference, Hotel Istana, Malaysia, May 11, 2004 LinuxWorld Conference & Expo is a leading gathering place for anyone and everyone interested in Linux and Open Source Technologies. At LinuxWorld, you can see the latest technology developments in practice, speak with leading minds in the open source movement, network with your peers to discuss how to best leverage the technology for your organisation.
-
Critical Technologies for Hypersonic Vehicle Development RTO-AVT-VKI Lecture Series
Course, von Karman Institute for Fluid Dynamics, Rhode-St-Genese, Belgium, May 10, 2004 Continued interest in the development of hypersonic flight vehicles is based on their potential for lowering the cost of access to space and for revolutionizing intercontinental civil and military transport.
-
11th International Conference on Fluidization: Present and Future for Fluidization Engineering
Conference, Hilton Sorrento Palace, Sorrento, Italy, May 9, 2004 The general scope of the Conference is Fluidization as a
technique to accomplish multiphase contacting in the process
industry. From fundamentals of Fluidization to its
applications is addressed with special emphasis on emerging
and novel systems.
-
12th Annual Conference of the CFD Society
Conference, Ottawa, Canada, May 9, 2004 Call for Paper for the 12th Annual Conference of the CFD Society
of Canada, Ottawa, May 9-11, 2004
-
COST ACTION C14: Urban Wind Engineering and Buildings Aerodynamics
Conference, von Karman Institute for Fluid Dynamics, Belgium, May 5, 2004 International conference on impact of wind and storm on city life and built environment
organized by the von Karman Institute and Cost Action 14
-
2004 North American STAR-CD User Conferences
User Conference, Doubletree Hotel & Hacienda Hotel, Novi & LAX, El Segundo, United States, May 5, 2004 A conference inviting anyone in the CFD community to attend presentations and workshops.
-
10th International PHOENICS User Conference
User Conference, Melbourne, Australia, May 3, 2004 A conference at which PHOENICS users from all over the world congregate to present their work and discuss their applications with other PHOENICS users and experts
-
Heat Transfer and Inverse Analysis RTO-AVT-VKI Lecture Series
Course, von Karman Institute for Fluid Dynamics, Rhode-St-Genese, Belgium, April 26, 2004 This Lecture Series aims at providing state-of-the-art information on the applicability and potential of inverse methods in the field of heat transfer analysis.
-
ANSYS Advanced CFD Technologies featuring ANSYS ICEM CFD and CFX
Seminar, HP Sacramento Education Center, Roseville, United States, April 22, 2004
-
ANSYS Advanced CFD Technologies featuring ANSYS ICEM CFD and CFX
Seminar, Hilton Pleasanton at The Club, Pleasanton, United States, April 21, 2004
-
ANSYS Advanced CFD Technologies featuring ANSYS ICEM CFD and CFX
Seminar, HP Cupertino Education Center, Cupertino, United States, April 20, 2004
-
CHT-04: Advances in Computational Heat Transfer
Conference, Cruise ship, Kirkenes to Bergen, Norway, April 19, 2004 The goal is to provide a forum for the exposure and exchange of ideas, methods and results in computational heat transfer.
Papers on all aspects of computational heat transfer - both fundamental and applied - will be welcome.
-
34TH Computational Fluid Dynamics Course - Aeroelasticity and Multidisciplinary Optimization
Course, von Karman Institute for Fluid Dynamics, Rhode-St-Genese, Belgium, April 19, 2004 The annual Lecture Series in Computational Fluid Dynamics (CFD) brings in-depth presentations on well-established methods and recent advances in the field of algorithm development for numerical flow simulation.
-
Gridgen User Group Meeting
User Conference, Renaissance Worthington Hotel, Fort Worth, United States, April 5, 2004 Pointwise is pleased to announce the first Gridgen User Group Meeting to be held in our hometown of Fort Worth, Texas on April 5-6, 2004. The meeting, to be held at the Renaissance Worthington Hotel, will include special Gridgen training seminars, presentations by Pointwise staff on new Gridgen developments, user presentations, and exhibits by our partners.
-
ICFD Conference on Numerical Methods for Fluid Dynamics
Conference, St Catherine's College, Oxford, United Kingdom, March 29, 2004 This is the eighth international conference on CFD organised by
the ICFD (Institute for Computational Fluid Dynamics), a joint research organisation at the Universities of Oxford and
Reading
-
ICFD Conference on Numerical Methods for Fluid Dynamics
Conference, St Catherine's College, Oxford, United Kingdom, March 29, 2004 This is the eighth international conference on CFD organised by
the ICFD (Institute for Computational Fluid Dynamics), a joint research organisation at the Universities of Oxford and
Reading
-
Introduction to Turbulence Modeling
Course, von Karman Institute for Fluid Dynamics, Rhode-St-Genese, Belgium, March 22, 2004 This Lecture Series is intended to provide a state-of-the-art review of turbulence modeling and to indicate current research directions. The course begins with an introduction to the fundamental physical principles of turbulence and its modeling.
|