-
Advanced course on Automotive CFD Analysis , From 01- June- 2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, June 1, 2020 Course developed with Automotive R&D Centers and over seas universities.
Projects covered in the course :
1. Subsystem level CFD analysis
A. CFD analysis of radiator
B. CFD analysis of condenser
C. CFD analysis of Charge Air cooler
2. Integrated level underhood Thermal analysis of full vehicle
3. CFD analysis of disk brake cooling
4. Aerodynamics analysis of sedan with perfect boundary layer modelling approach
-
18th International Icing Course, 4-day Course
Course, Hotel La Citadelle - 410 Sherbrooke Street West, Montreal, Canada, May 26, 2020 The course will show how modern 3D icing codes are based on highly
validated physical models (Scientific VVV) as opposed to
simply calibration against icing tunnels. The course will also show how
Reduced Order Models can make fully-3D calculations
inexpensive and enable identification of aerodynamic and
thermodynamic critical points in an automated structured way and not
a heuristic one.
-
International Microfluidics Conference
Conference, holiday in rome Aurelia, Bould, Rome, Algeria, May 26, 2020 Gavin Conferences welcomes participants from all over the
world to attend the CPD accredited “International
Microfluidics Conference”. Microfluidics 2020 is a two-
day congress going to be held at Rome, Italy from May 26-
27th, 2020.
-
9th Edition of International Conference and Exhibition on Separation Techniques
Conference, Dublin, Ireland, May 25, 2020 This event will provide an opportunity to build and
expand your network with various people and gives chance
to make collaboration with other universities and
research labs. It also helps you to meet the experts in
the relevant field of study. It gives the access to novel
instruments in the market. This conference plays a major
role in your business development and maximizes the
profit.
-
Online Course on Large Eddy Simulation and Related Techniques - von Karman Institute Lecture Series
Course, online, online, Belgium, May 25, 2020 The purpose of this online Lecture Series is to offer a
full
overview of the present development and the potential of
the
Large Eddy Simulation (LES) of turbulent flows. The
course
will be delivered by internationally recognized experts.
Its
content is addressed both to researchers interested in
the
fundamental simulation of turbulence and engineers
wanting
to apply the LES technique or LES solvers to the accurate
simulations of turbulent flows.
-
International conference on Cloud Computing and Virtualization
Conference, 47 Churchfield Road, London, W3 6AY, LONDON, United Kingdom, May 21, 2020 Conference Series LLC Ltd. will offer delegates
opportunity to be fully briefed on the current situation
within the engineering system and gain and update on the
latest developments in terms of technical policy and
funding.
Engineering concern but lack the emphasis on the more
conventional subjects. Guided by a line-up of expert
speakers, the agenda will address some of the major
issues related to Cloud Computing and Virtualization,
-
International conference on Cloud Computing and Virtualization
Conference, London,UK, LONDON, United Kingdom, May 21, 2020 I have information to share with you
Title: International conference on Cloud Computing and
Virtualization
Date: May 21-22, 2020
Venue: London, UK
Please let us know your interest to join us in this
conference
-
International conference on Cloud Computing and Virtualization
Conference, London,UK, LONDON, United Kingdom, May 21, 2020 I have information to share with you
Title: International conference on Cloud Computing and
Virtualization
Date: May 21-22, 2020
Venue: London, UK
Please let us know your interest to join us in this
conference
-
Advanced OpenFOAM® Training Course - 2 Day
Course, Ferntree Gully, Australia, May 18, 2020 This class is suitable for those with user level
experience using OpenFOAM®.
Participants in the course will learn the layout of the
OpenFOAM® library, how to
copy and compile a solver. Lastly, the ability to read
the OpenFOAM® library
without fear, removing the FUD (fear, uncertainty and
doubt) that grips most new
users.
-
Course on Industry Oriented CFD analysis , From 15-May-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, May 15, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
Course on Industry Oriented CFD analysis , From 02-May-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, May 2, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
Advanced course on Automotive CFD Analysis , From 01- May- 2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, May 1, 2020 Course developed with Automotive R&D Centers and over seas universities.
Projects covered in the course :
1. Subsystem level CFD analysis
A. CFD analysis of radiator
B. CFD analysis of condenser
C. CFD analysis of Charge Air cooler
2. Integrated level underhood Thermal analysis of full vehicle
3. CFD analysis of disk brake cooling
4. Aerodynamics analysis of sedan with perfect boundary layer modelling approach
-
Getting Started with Tecplot for Barracuda
Online Event, April 29, 2020 This Webinar will help you get started using Tecplot for
Barracuda while learning best practices for plotting and
analyzing Virtual Reactor™ data.
-
Simulating Data Center Energy Use; Linking CFD and Cooling Plant Modeling
Online Event, April 29, 2020 Attendees of this webinar will learn how to couple the output of a typical
data center CFD model output, to a simulation of the data center external
cooling plant. The result is an entire "systems" model of the entire data
center complex, providing a high fidelity representation of the facility,
with the ability to then analyze the economic impact of potential changes.
-
Advances in Sustainable Energy and Fuels
Conference, Hilton New York JFK Airport Hotel, 144-02 135th Avenue, Jamaica, New York, United States, April 23, 2020 LONGDOM proffers our immense pleasure and honor in
extending you a warm invitation to attend Sustainable
Energy 2020. It is focusing on ‘A Fuel For Sustainable
Future’ to enhance and explore knowledge among Energy
Departments and to establish corporations and exchanging
ideas. Providing the right stage to present stimulating
Keynote talks, Plenary sessions, Discussion Panels, B2B
Meetings, Poster symposia, Video Presentations, and
Workshops.
-
Symposium on OpenFOAM® Technology - April 2020 - Melbourne, Australia
User Conference, Level 8/500 Collins St, Melbourne, Australia, April 22, 2020 The Symposium on OpenFOAM® Technology (SOFT), organised
by Applied CCM will
bring together people who utilise software based on
OpenFOAM (variants and
forks)
-
Optimization Methods for Computational Fluid Dynamics
Course, Waterloosesteenweg, Sint-Genesius-Rode, Belgium, April 20, 2020 This von Karman Lecture Series intends to provide the
basic concepts and tools behind this technology, both in
single discipline (single point or multi point design)
and multidisciplinary (fluid-structure interaction,
fluid-acoustics, conjugate heat transfer, …) context.
-
Pointwise for Aerospace CFD Workshop- April 2020 - Queensland, Australia
Workshop, Level 11/300 Adelaide St, Brisbane City , Australia, April 20, 2020 Increase Aerospace CFD Simulation Accuracy and Efficiency
with Pointwise Meshing Flexibility. Presented By Dr. Rick
Matus, Pointwise and Dr. Martin Leahy, Applied CCM.
-
5th International Conference on Experimental and Numerical Flow and Heat Transfer (ENFHT’20)
Conference, Hotel Real Palácio, Lisbon, Portugal, April 15, 2020 The 5th International Conference on Experimental and
Numerical Flow and Heat Transfer (ENFHT’20) aims to become
the leading annual conference in fields related to
experimental and numerical flow and heat transfer. The goal
of ENFHT'20 is to gather scholars from all over the world to
present advances in the relevant fields and to foster an
environment conducive to exchanging ideas and information.
-
5th International Conference on Combustion Science and Processes (CSP’20)
Conference, Hotel Real Palácio, Lisbon, Portugal, April 15, 2020 The 5th International Conference on Combustion Science
and Processes (CSP’20) aims to become the leading
annual conference in fields related to combustion science
and processes. The goal of CSP'20 is to gather
scholars from all over the world to present advances in
the relevant fields and to foster an environment
conducive to exchanging ideas and information.
-
5th International Conference on Multiphase Flow and Heat Transfer (ICMFHT’20)
Conference, Hotel Real Palácio, Lisbon, Portugal, April 15, 2020 The 5th International Conference on Multiphase Flow and
Heat Transfer (ICMFHT'20) aims to become the leading
annual conference in fields related to Multiphase Flow
and Heat Transfer. The goal of ICMFHT'20 is to gather
scholars from all over the world to present advances in
the relevant fields and to foster an environment
conducive to exchanging ideas and information.
-
Course on Industry Oriented CFD analysis , From 15-April-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, April 15, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
Internal Combustion Engine Modeling in CONVERGE
Course, Convergent Science Offices, Detroit, United States, April 14, 2020 This two-day course offers an introduction to CONVERGE for internal
combustion (IC) engine modeling.
-
Surface Preparation with CONVERGE Studio for IC Engines
Course, Convergent Science - Detroit, Detroit, United States, April 13, 2020 This course offers an introduction to surface preparation in CONVERGE
Studio.
-
Tecplot Training at CONVERGE User Conference
Course, Stuttgart, Germany, April 2, 2020 Tecplot Training Session: Learn how to load, manipulate
and export CONVERGE data in Tecplot 360. We will start
with a
quick tour of the Tecplot 360 user interface and will
work our
way up to more advanced topics. See detailed description
below.
-
Advanced course on Automotive CFD Analysis , From 01 - April- 2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, April 1, 2020 Course developed with Automotive R&D Centers and over seas universities.
Projects covered in the course :
1. Subsystem level CFD analysis
A. CFD analysis of radiator
B. CFD analysis of condenser
C. CFD analysis of Charge Air cooler
2. Integrated level underhood Thermal analysis of full vehicle
3. CFD analysis of disk brake cooling
4. Aerodynamics analysis of sedan with perfect boundary layer modelling approach
-
Course on Industry Oriented CFD analysis , From 01-April-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, April 1, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
CONVERGE User Conference–Europe | Online
Online Event, March 31, 2020 The 2020 CONVERGE User Conference–Europe will be held online
on March 31 and April 01. This free event will virtually bring together
members of industry, government, and academic institutions from
around the world to discuss the latest research and developments in
CFD.
-
Comparing Simulation and Measured Data Through Extractions
Online Event, March 26, 2020 In this webinar you’ll learn four different
methods for extracting line and point data from
your 3D simulation data (using Tecplot 360).
These extraction methods are particularly
important if you are comparing results from
multiple simulations or simulation data with
measured data (such as wind tunnel results).
-
Fluid-Structure Interaction for Industrial Applications - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-Genesius-Rode (near Brussels), Belgium, March 23, 2020 In the framework of this lectures series, several well-known
experts from around the world will give lectures on the
important topics related to the computational FSI in order
to understand and study the FIV in different industrial
applications. This lecture series aims at providing a
detailed background to welcome novices in the field as well
as a comprehensive overview of recent developments of
computational FSI in various industrial applications.
-
Internal Combustion Engine Modeling in CONVERGE
Course, 825 Town & Country Ln, 12th Floor, Houston, United States, March 18, 2020 This two-day course offers an introduction to CONVERGE for internal
combustion (IC) engine modeling.
-
General Flow Modeling in CONVERGE
Course, 825 Town & Country Ln, 12th Floor, Houston, United States, March 18, 2020 CONVERGE is an innovative multi-purpose CFD software that can
provide insight into compressors, fans, blowers, pumps, oil and gas,
fuel injectors and sprays, aftertreatment, gas turbines, biomedical, and
many other applications.
-
Surface Preparation with CONVERGE Studio for IC Engines
Course, 825 Town & Country Ln, 12th Floor, Houston, United States, March 17, 2020 This course offers an introduction to surface preparation in CONVERGE
Studio.
-
Course on Industry Oriented CFD analysis , From 16-March-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, March 16, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
Advanced course on Automotive CFD Analysis , From 02 - March- 2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, March 2, 2020 Course developed with Automotive R&D Centers and over seas universities.
Projects covered in the course :
1. Subsystem level CFD analysis
A. CFD analysis of radiator
B. CFD analysis of condenser
C. CFD analysis of Charge Air cooler
2. Integrated level underhood Thermal analysis of full vehicle
3. CFD analysis of disk brake cooling
4. Aerodynamics analysis of sedan with perfect boundary layer modelling approach
-
Course on Industry Oriented CFD analysis , From 02-March-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, March 2, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
WEBINAR || What’s New in CONVERGE 3.0
Online Event, February 27, 2020 In this course we will offer a brief introduction to some of the new
features and enhancements in CONVERGE 3.0.
-
WEBINAR || Engine Aftertreatment Modeling
Online Event, February 26, 2020 This workshop will focus on Urea/SCR engine aftertreatment modeling
in CONVERGE.
-
WEBINAR || Emissions Modeling
Online Event, February 25, 2020 In this lecture we will discuss the options available in CONVERGE
and best practice recommendations to obtain accurate engine-out
emissions.
-
Machine Learning for Fluid Mechanics: Analysis, Modeling, Control and Closures - von Karman Lecture Series
Course, Waterloosesteenweg 72, Sint-Genesius-Rode (near Brussels), Belgium, February 24, 2020 This new course aims at providing a unified treatment of the
machine learning tools that are now paving the way towards
advanced methods for model order reduction, system
identification, and flow control. The course will gather
ideas and notions from various fields, starting from the
data decompositions that were pioneered in fluid mechanics
and moving towards machine learning methods that were
initially developed in machine vision, pattern recognition,
and artificial intelligence.
-
WEBINAR || Chemistry Tools
Online Event, February 24, 2020 CONVERGE includes a variety of tools to perform simplified kinetics
calculations and to manipulate and evaluate chemical kinetic
mechanisms.
-
CAS Computational Fluid Dynamics
Course, HSR Hochschule für Technik Rapperswil, Rapperswil, Switzerland, February 20, 2020 In this on-the-job vocational training CAS Computational Fluid Dynamics you will learn how to apply the relevant theoretical and practical tools to allow you to execute complex simulations.
-
Applied Computational Fluid Dynamics for Engineers
Workshop, Quest Bella Vista 24 Norbrik Drive, Bella Vista (Sydney), Australia, February 20, 2020 This workshop provides engineers with in-
structions to set up a CFD model (geometry, mesh
generation,
boundary conditions, turbulence & numerical models) to
obtain more reliable data compared by test results.
Last but not least, a practical demonstration session is
also included as
part of the workshop to present some tips and tricks of
CFD appli- cation in
particular industries, such as aerodynamics,
hydrodynamics, heat &
thermal comfort, rotating machinery, oil & gas, medical,
etc.
-
Course on Industry Oriented CFD analysis , From 15-February-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, February 15, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
International Microfluidics Conference
Conference, holiday in rome Aurelia, Boulder, CO 80302, Rome, Italy, February 14, 2020 Gavin Conferences welcomes participants from all over the
world to attend the CPD accredited “International
Microfluidics Conference”. Microfluidics 2020 is a two-
day congress going to be held at Rome, Italy from
February 14-15th, 2020.
-
International Microfluidics Conference
Conference, holiday in rome Aurelia, Boulder, CO 80302, Rome, Italy, February 14, 2020 Gavin Conferences welcomes participants from all over the
world to attend the CPD accredited “International
Microfluidics Conference”. Microfluidics 2020 is a two-
day congress going to be held at Rome, Italy from
February 14-15th, 2020.
Theme: Microfluidic Research Trends and Techniques.
https://microfluidics.gavinconferences.com
-
Radial Compressor Design and Optimization
Course, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, February 10, 2020 This short course is the regular course on radial
compressors thought at VKI to the turbomachinery students
specializing in compressors in the context of the “Research
Master in Fluid Dynamics”. It provides an overview of the
present knowledge and flow models and intends to provide a
good background for the people interested in the aerodynamic
design of radial compressors.
-
OpenFOAM® Adjoint Shape Optimisation Course
Course, Neu Isenburg, Germany, February 5, 2020 Both the computation of the so-called sensitivity maps and the full optimisation
process will be covered, including shape and mesh morphing. The theoretical
background is accompanied by hands-on training focusing on the set-up of the
OpenFOAM adjoint solver, discussing its capabilities and following the steps
required to perform a shape optimisation loop.
-
Tecplot Visualization Day
Workshop, Dept. of Mathematics, Celestijnenlaan 200 B, Leuven, Belgium, February 5, 2020 Tecplot 360 Viz Day - Learn new and hidden techniques for 3D, 2D,
XY line plotting, cool animations, Python & macro scripting,
optimization of parametric simulations, and more!
Participants will have the opportunity to learn techniques that
help them in loading, post-processing, visualizing and sharing
large and complex data from numerical simulations as well as
experimental data.
-
Simerics European User Meeting
User Conference, VDI Haus, Stuttgart / Vaihingen, Germany, February 4, 2020 3rd European User Meeting at the VDI Haus in Stuttgart-Vaihingen on the 4th and 5th of February 2020.
-
Advanced course on Automotive CFD Analysis , From 01 - February - 2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, February 1, 2020 Course developed with Automotive R&D Centers and over seas universities.
Projects covered in the course :
1. Subsystem level CFD analysis
A. CFD analysis of radiator
B. CFD analysis of condenser
C. CFD analysis of Charge Air cooler
2. Integrated level underhood Thermal analysis of full vehicle
3. CFD analysis of disk brake cooling
4. Aerodynamics analysis of sedan with perfect boundary layer modelling approach
-
Course on Industry Oriented CFD analysis , From 01-February-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, February 1, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
What’s New in Simcenter Flotherm 2019.2 and Simcenter Flotherm XT 2019.3
Conference, Algeria, January 30, 2020 New enhancements to Simcenter Flotherm 2019.2 and Simcenter Flotherm XT 2019.3 electronics cooling software including: new results analysis mode and post processing automation; Simcenter Flotherm Package Creator, PCB copper thermal modeling options, and more.
-
WEBINAR || Advanced Topics in Internal Combustion Engine Modeling | Part 2
Online Event, January 30, 2020 In this workshop we will discuss timely and popular topics in internal
combustion (IC) engine modeling and some of the unique features of
CONVERGE that yield efficient and accurate simulations.
-
WEBINAR || Advanced Topics in Internal Combustion Engine Modeling | Part 1
Online Event, January 29, 2020 In this workshop we will discuss timely and popular topics in internal
combustion (IC) engine modeling and some of the unique features of
CONVERGE that yield efficient and accurate simulations.
-
WEBINAR || Non-Premixed Combustion Modeling
Online Event, January 28, 2020 In this workshop, we will discuss several combustion models that
can be used to simulate diffusion-controlled, non-premixed
combustion: direct chemistry approach (SAGE), Representative
Interactive Flamelet (RIF), 3-Zone Extended Coherent Flame Model
(ECFM3Z), and Flamelet Generated Manifold (FGM).
-
CAD & CFD in the Cloud: End-to-End Design Optimization
Online Event, January 23, 2020 In an exclusive webinar organized by Onshape and
SimScale, engineers will learn about all the benefits of a
cloud-based design process. The session will include a
demo of both tools, using an electronics cooling
example. The design of a printed circuit board created in
Onshape will be investigated with fluid flow simulation
and heat transfer analysis using SimScale to ensure that
heat is removed effectively and overheating is
prevented.
-
Standard OpenFOAM® Training Course - 2 Day
Course, Ferntree Gully, Australia, January 21, 2020 This class is suitable for those with limited or no prior
experience using OpenFOAM®. It includes a basic overview
of the library, discussion of the fundamentals of the
library, discretization schemes, linear solver settings
and case set up.
-
Introduction to Computational Fluid Dynamics - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-Genesius-Rode (near Brussels), Belgium, January 20, 2020 The objective of these lecture series on "Introduction to
CFD" is to provide an elementary tutorial presentation on
computational fluid dynamics (CFD), emphasizing the
fundamentals and surveying a variety of solution techniques
whose applications range from low speed incompressible flow
to hypersonic flow.
-
Course on Industry Oriented CFD analysis , From 16-January-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, January 16, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
Course on Industry Oriented CFD analysis , From 02-January-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, January 2, 2020 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
Advanced course on Automotive CFD Analysis , From 02 - January - 2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, January 2, 2020 Course developed with Automotive R&D Centers and over seas universities.
Projects covered in the course :
1. Subsystem level CFD analysis
A. CFD analysis of radiator
B. CFD analysis of condenser
C. CFD analysis of Charge Air cooler
2. Integrated level underhood Thermal analysis of full vehicle
3. CFD analysis of disk brake cooling
4. Aerodynamics analysis of sedan with perfect boundary layer modelling approach
-
Mathematical Modeling for Complex Fluids
Course, Chemical Engineering Departments, NIT Jalandhar, Jalandhar, India, January 1, 2020 The contents of this short term course is designed to develop an understanding of mathematical models of complex fluids flow and its relevance to fundamental understanding and industrial application
-
Solid Edge 2020 Hands-On Workshop
Workshop, The Siemens Center, 60 MacPherson Road, Singapore 348615, Singapore, Singapore, January 1, 2020 Free Solid Edge 2020 Workshop
Solid Edge Synchronous CAD modeling tool will be
demonstrated in this free workshop. With the new
professional feature, Design engineers, Manufacturers
alike who are currently using Solidworks can improve the
speed & accuracy of CAD modeling, and easily perform the
process of Engineering development from Concept to Final
product.
-
Conjugate Heat Transfer Best Practices in CFD
Online Event, December 18, 2019 In this webinar, you will learn about conjugate heat
transfer best practices for a forced convection
electronics application. It will cover geometry
preparation, material assignments, boundary conditions,
result control tools, and post-processing. By the end of
this webinar, you will know if your CHT simulation
results are converged and can be trusted, and how to most
efficiently set up simulation control run parameters.
December 18, 11:00 ET / 17:00 CET
-
Industry Oriented CFD Analysis course , from 16-December-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, December 16, 2019 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Best Practice Guidelines for CFD of Turbulent Combustion including an introduction to machine learning tools
Course, Université Libre de Bruxelles, Avenue Franklin Roosevelt 50, Brussels, Belgium, December 11, 2019 The participants will learn the best practices in CFD of turbulent
combustion. It introduces the latest trends in the use of machine-
learning based approaches to improve the understanding of turbulent
reacting flow and develop more efficient and accurate numerical
models. The lectures of this course, all by well-known experts in the
field, cover from basics to applications. The course is partially based
on the ERCOFTAC Best Practice Guidelines on CFD of Turbulent
Combustion.
-
WEBINAR Nonlinear Material: Plasticity with Enterfea
Online Event, December 4, 2019 This collaborative webinar between SimScale and Enterfea
will explore plasticity and nonlinear materials in FEA
simulation.
- December 4, 14:30 CET.
- Free.
- A SimScale event hosted online via GoToWebinar.
Link ---> https://bit.ly/2OFl3sb
-
Applying CFD to Process and Plant Safety
Course, IIT, Roorkee, India, December 2, 2019 Objectives:
The primary objectives of the course familiarizing the
participants with:
i) fundamentals of process and plant safety
ii) real practices in different industries
iii) potential hazard scenarios and risk
assessment methodologies
iv) Best possible approaches
v) CFD approaches to assess the risks
vi) Case Studies
-
Industry Oriented CFD Analysis course , from 02-December-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, December 2, 2019 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Gothenburg Region OpenFOAM User Group Meeting
User Conference, Sven Hultins gata 9C, Gothenburg, Sweden, November 20, 2019 The purpose is to bring together people working with
OpenFOAM to get to know each other and share experiences.
The meeting is free of charge and open to anyone
(Gothenburg, Sweden, Europe etc.)
-
ISimT-19
Conference, Schloßstraße 18 - 25, Hohenkammer, Germany, November 19, 2019 Symposium on Innovative Simulations in Turbomachinery
-
Information meeting: CAS Computational Fluid Dynamics
HSR Hochschule für Technik Rapperswil, Rapperswil, Switzerland, November 19, 2019 The information meeting gives you more information about the on-the-job vocational training CAS Computational Fluid Dynamics that starts in February 2020.
-
Mechanical & Aerospace Engineering 2019
Conference, EuroSciCon Ltd, 40 Bloomsbury Way Lower Ground Floor, London, , London, United Kingdom, November 18, 2019 Welcome to the official website of 2019 7th European
Congress & Business Expo on Mechanical & Aerospace
Engineering. Mech Aero 2019 is organized by EuroSciCon.
The conference will be held in London, UK November 18-19.
-
Industry Oriented CFD Analysis course , from 15-November-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, November 15, 2019 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Pointwise for Automotive CFD Simulation Workshop
Workshop, München, Germany, November 14, 2019 Increase automotive simulation accuracy and efficiency with
meshing flexibility. Pointwise generates high-quality, high
aspect ratio meshes that are key to efficiency for demanding
automotive CFD simulations.
-
Mesh Generation with SimScale Webinar
Online, Germany, November 13, 2019 This webinar will cover a deep-dive into the new standard
mesher and demonstrate some performance improvements when
compared to the previous default mesher.
https://www.simscale.com/webinars-workshops/mesh-
generation-
simscale/
-
Workshop on How to Increase Ship CFD Simulation Accuracy, Efficiency with Pointwise Meshing Flexibility
Workshop, Hamburg, Germany, November 12, 2019 Increase ship CFD simulation accuracy and efficiency with
meshing flexibility. Pointwise generates high-quality, high
aspect ratio meshes that are key to CFD efficiency for high
Reynolds number marine simulations. Interactive
demonstrations and background information will show the how
and why of the automated mesh generation process in
Pointwise.
-
NUMECA International User Meeting
User Conference, Radisson Blu Royal Hotel, 47 Wolvengracht , Brussels, Belgium, November 12, 2019 Join NUMECA for a 3-day event featuring exciting case study
presentations from our own experts and industry leaders like CNES,
Safran, Emirates Team New Zealand, LMG Marin and many others...
Witness the unveiling of new game changing technology for CFD,
delivering high-precision results with next to zero pre-processing time!
Receive hands-on training from the experts in CFD.
-
17th Multiphase Flow Conference & Short Course
Course, Helmholtz-Zentrum Dresden - Rossendorf, Dresden, Germany, November 11, 2019 The goal of the workshop was to bring together experimental
and numerical practitioners, and to foster discussion and
exchange of knowledge.
The Short Course will address the interests of engineers,
chemists, physicists and technicians active in research and
design, who want to be informed about modern design methods
and tools for multiphase flows.
-
'Large Eddy Simulation (LES), hybrid LES-RANS, Detached Eddy Simulation (DES) and unsteady RANS
Workshop, Hotel Quality Hotel Panorama, Gothenburg, Sweden, November 11, 2019 A three-day course on
''Large Eddy Simulation (LES), hybrid LES-RANS, Detached
Eddy Simulation (DES) and unsteady RANS''
is given in Gothenburg, Sweden, Nov 11-13, 2019.
-
Introduction to Ground Testing Facilities - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-Geneius-Rode, Belgium, November 5, 2019 This course is organized for student and engineers to
provide a general understanding of the design, operation and
application of ground testing facilities from all speed
regimes. Experimental methodology is exposed as well as the
interpretation of the data and their extrapolation to real
situation. The course includes an on-site presentation of
the VKI facilities during a lab visit.
-
Industry Oriented CFD Analysis course , from 01-November-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, November 1, 2019 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Advanced course on Automotive CFD analysis , from 01-November-2019 , 10 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, November 1, 2019 1.The course covers real time projects of Automotive Industry.
2.Two Months Full time duration course.
-
Webinar: How To Set Up a Cost-Effective Transient Simulation
Online Event, October 30, 2019 This webinar will dive into a transient simulation on our
standard CFD solver, looking at key setup parameters, and
how to speed the simulations up to obtain fast results.
https://bit.ly/31ZYlhX
-
Webinar: How To Set Up a Cost-Effective Transient Simulation
Online Event, October 30, 2019 This webinar will dive into a transient simulation on our
standard CFD solver, looking at key setup parameters, and
how to speed the simulations up to obtain fast results.
https://bit.ly/31ZYlhX
-
37. CADFEM ANSYS Simulation Conference
Conference, Kongress Palais Kassel, Kassel, Germany, October 16, 2019 The CADFEM ANSYS Simulation Conference is the annual meeting
meeting place for anyone involved with ANSYS and other simulation
simulation tools or thinking about getting started.
-
Industry Oriented CFD Analysis course , from 15-October-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, October 15, 2019 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
7th ESI OpenFOAM Conference
Conference, Titanic Chaussee Hotel Berlin, Berlin, Germany, October 15, 2019 This event, organized by ESI OpenCFD, offers a unique
opportunity to be part of the current and future Governance
of OpenFOAM and interact with users and developers across
the OpenFOAM community. This is the OpenFOAM primary event
in all areas of CFD applications and Process integration.
Who should attend? CFD Engineers, Managers, IT
Specialists, Developers, Consultants, Researchers,
Students. The third day provides accredited trainings with
Continuing Professional Development hours.
-
From Zero to Hero - Learn Tecplot 360 Basics in 30 Minutes
Online Event, October 9, 2019 Get started with Tecplot 360 while learning best practices for plotting and analyzing your data.
This 30-minute Webinar will walk you through everything from loading your data to exporting images
and animations.
-
Aeronautic Solution Series Part 1 : Webinar on External Aero
Conference, Belgium, October 9, 2019 From propulsion, acoustics to external aero and optimization,
NUMECA’s powerful CFD Flow Integrated Environment dedicated to
Multiphysics helps you ensure your competitive advantage.
Our aeronautic solution series will provide you a full aero solution. The
first part of the series is a webinar dedicated to external aero for
supersonic, subsonic, passenger, light aircrafts and drones.
-
Introduction to Measurement Techniques - von Karman Lecture Series
Course, Waterloosesteenweg, Sint-Genesius-Rode, Belgium, October 7, 2019 The objective of this course is to provide young
engineers with a broad overview of traditional and
advanced measurement techniques applicable to fluid
dynamics
-
Fourth Midwest OpenFOAM User Group Meeting
User Conference, 599 Walter Library, 117 Pleasant St. SE, Minneapolis, United States, October 4, 2019 The Midwest OpenFOAM User Group (MOFUG) is pleased to
announce that the 2019 MOFUG Meeting will be hosted in
Minneapolis, Minnesota at the Minnesota Supercomputer
Institute and the Digital Technology Center.
-
Building Better Designs Using 1D/3D Simulation
Online Event, October 3, 2019 How can 1D/3D simulation help you to design better systems? Sign up to this web seminar to find out!
-
Webinar: Democratizing Marine CFD for Maneuvering
Belgium, October 2, 2019 During this Webinar, Numeca's CFD specialists will share examples of
maneuvering simulations that modern marine design teams have used
to gain a competitive edge.
-
Industry Oriented CFD Analysis course , from 01-October-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, October 1, 2019 1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
2nd Spanish HPC Combustion Workshop
Workshop, Barcelona Supercomputing Center, Barcelona, Spain, September 27, 2019 The 2nd Spanish HPC combustion workshop is dedicated to
present the state of the art in modelling and simulation
techniques for combustion applications in the national
context with representative research institutions. The
topics go from multiphase flow calculations, combustion
instabilities, alternative fuels, large-eddy simulations,
numerical methods for reacting flows to advance multiphysics
applications.
-
Color for Directors: Answering Difficult Engineering Questions
Online Event, September 26, 2019 Leverage the power of CAD-embedded CFD simulation to drastically improve engineering productivity.
-
Simulation Partikelbeladener Strömungen
Course, Institut für Mechanische Verfahrenstechnik und Mechanik, KIT, Karlsruhe, Germany, September 25, 2019 Die Simulation partikelbeladener Strömungen hat in den letzten Jahren aufgrund der immer größeren Leistungsfähigkeit von Computeranlagen eine weitreichende Bedeutung für die Auslegung von Verfahren, Maschinen und Anlagen in der Chemie, Verfahrenstechnik, Biotechnologie und vielen Zulieferindustrien erlangt. In diesem Kurs vom 25. bis 27. September in Karlsruhe erfahren Sie in einem Softwarepraktikum am Computer, wie Sie bei der Simulation einer mehrphasigen Strömung vorgehen.
-
SimXp - Energy Efficiency & Indoor Climate - Experiment & Simulation
Seminar, Fraunhoferstraße 10, Valley, Germany, September 24, 2019 The digital transformation of the construction industry is well
underway - keyword "Building Information Modelling - BIM", its
goal being innovative system solutions for buildings. The new
seminar SimXp, organised by the Fraunhofer Institute for
Building Physics IBP and the simulation specialist ISimQ, will
demonstrate how to combine simulation and experimental methods
to this end.
|