-
Advanced Training in FLUENT
Course, Fluent Inc., Lebanon, United States, July 17, 2006
This course is intended for experienced users of FLUENT v6
who are interested in more in-depth instruction on
specific topics. Users may sign up for one or more days of
instruction. Courses will consist of both lecture and
hands-on examples.
-
Introduction to Icepak Training by Fluent
Course, Fluent Inc., Austin, United States, July 17, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Gridgen Standard Training Course
Seminar, Baltimore, United States, July 17, 2006
The Gridgen Standard Training Course includes three days
covering both basic and advanced Gridgen usage. The most
commonly used GUI commands and efficient tools for making
grids quickly are thoroughly explained. The training course
progresses to more advanced tools and how to work with
difficult topologies and geometry models. Tutorials will
demonstrate the topics discussed and allow attendees their
own practice time with the newly learned tools.
-
4th Intl. Symposium on Computational Wind Engineering (CWE2006)
Conference, PACIFIO YOKOHAMA, Yokohama, Japan, July 16, 2006
This symposium seeks to facilitate the exchange of the latest scientific and technical information in the field of Computational Fluid Dynamics, particularly in its application to Wind Engineering.
-
CFD 2006 Queen's University at Kingston, Canada - July 16-18, 2006
Conference, Queen's University, Kingston, Canada, July 16, 2006
14th Annual CFDSC Conference will feature 4 keynote
lecturers, a CFD Challenge exercise and a short-course,
which will be held immediately following the conference.
-
Introduction to Airpak Training by Fluent
Course, Fluent Inc., Lebanon, United States, July 12, 2006
The training course is a combination of lectures with
discussion and hands-on exercises to introduce the student
to the basics of using Airpak, to familiarize the student
with the user-interface, and also to begin a mutually
beneficial partnership.
-
Fourth International Conference on Computational Fluid Dynamics
Conference, University of Ghent, Het Pand, Ghent, Belgium, July 10, 2006
ICCFD is devoted to all innovative aspects of CFD, basic
and applied.
-
Introduction to FLUENT Training
Course, Fluent Inc., Ann Arbor, United States, July 10, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, July 10, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to POLYFLOW Training by Fluent
Course, Fluent Inc., Lebanon, United States, July 10, 2006
This course is intended for people who have had little or
no experience using POLYFLOW. New users of the software
should register for the four-day training course.
-
Introduction to Icepak Training by Fluent
Course, Santa Clara, United States, July 10, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Turkey FLUENT User Group Meeting
Conference, Bilkent Hotel, Ankara, Turkey, July 5, 2006
This three day event is for gathering FLUENT users in
Turkey. First day will be dedicated to trainings and the
following two days there will be FLUENT user articles as
well as Flowmaster and Concepts-NREC demonstrations at
parallel sessions.
-
Advanced School on Computational Model for Turbulent Multiphase Reacting Flows
Course, CISM - Palazzo del Torso - Piazza Garibaldi 18, Udine (UD), Italy, July 3, 2006
The course is addressed to master and PhD students in
engineering and science, postdocs and industrial
researchers working on simulation and modeling of
multiphase polydisperse systems, such as: bubble columns,
fluidized beds, aerosol, spray combustion chambers,
crystallization and precipitation etc.
-
2nd STAR CD USERS MEET
User Conference, Banglore, India, July 3, 2006
CSM Software , bangalore - hosting 2nd STAR CD users meet
at bangalore
-
Automated Design and Optimisation Techniques
Seminar, IMechE, 1 Birdcage Walk, London, United Kingdom, June 28, 2006
Improved computer processor speeds have enabled automated
design and optimisation techniques to become more
practical, making this topic essential in today's design
environment. This seminar will examine some techniques
being used with a wide range of practical examples.
Industrial and academic speakers will make this a
fascinating and educational event for anyone involved in
CFD, design and computing science.
-
Preprocessing Enhancements Workshop for the Automotive Industry
Workshop, St. John's Conference Center, Plymouth, United States, June 28, 2006
In addition to improvements in existing tools like prism
grows and surface intersection, TGrid 4.0 offers a new
surface wrapper tool. Find out more about it at this free
workshop.
-
Fluent Webinar "Auslegung und Optimierung von Bioreaktoren mit modernen Engineering-Werkzeugen"
Online Event, June 27, 2006
Online-Seminar will be in German language
-
4th Joint CFX & FZR Short Course & Workshop on Multiphase Flows
Workshop, FZ Rossendorf, Institute of Safety Research, Rossendorf (Dresden), Germany, June 26, 2006
Workshop on Multiphase Flows: "Simulation, Experiment and
Application"; Keynotes: Prof. Dr.-Ing. Peter Stephan, Prof.
Dr. Y.A. Hassan, Prof. Dr. H.A. Jacobsen
-
Introduction to FLUENT Training
Course, Columbia, United States, June 26, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
A First Course on CFD, by Prof. P.L. Roe
Course, Centre for Mathematical Sciences, Cambridge, United Kingdom, June 26, 2006
The course will provide a solid foundation on traditional
and advanced numerical discretisation techniques for the
solution of the various partial differential equations which
govern fluid flow, showing how successful numerical methods
are rooted both in mathematical properties of those
equations and in notions of computational efficiency.
-
2nde Journee Numerique de la Marine
Conference, DGA / Bassin d essais des carenes, Val de Reuil (27100), France, June 23, 2006
FLUENT France et le Bassin d essais des carenes vous
invitent le Vendredi 23 Juin 2006 a la seconde edition de
la journee numerique de la marine.
Hydrodynamique, Cavitation, Ventilation, Voiles sont autant
de sujets d etude pour les industriels, architectes et
chercheurs engages dans l industrie navale.
Bien utilisee, la simulation numerique s affirme
aujourd hui comme un outil d analyse et de comprehension de
ces phenomenes.
-
Fluent Webinar "Rapid Flow Modeling: CFD-Power fuer den Design-Experten"
Online Event, June 22, 2006
!New Product! Online-Seminar will be in German language
-
Particle-laden flow: from geophysical to Kolmogorov scales
Workshop, University of Twente, Enschede, Netherlands, June 21, 2006
This Colloquium focuses on particle-laden flows with
interest ranging from
the detailed flow-physics involving many embedded
particles, to large-scale
turbulent dispersion in environmental and geophysical
problems. The
purpose of the Colloquium is to address the gap between
simulation,
modeling and experiments on the one hand and requirements
posed by
realistic geo-physical or environmental problems on the
other hand.
-
7th Intl Conference on Vibration Measurements by Laser Techniques
Conference, Faculty of Engineering, Ancona, Italy, June 20, 2006
The event aims at creating an active forum for experts in vibration and acoustics, manufacturers in the field of optical and non-invasive instrumentation and industrial users.
EXHIBITION
Leading manufacturers of laser vibrometer systems, holographic systems and modal and noise analysis systems will exhibit their latest products.
SHORT COURSE
A one-day tutorial course will be held the day before the event to provide fundamentals of these techniques.
-
Fluent Webinar "Kostenguenstige, virtuelle Auslegung von Extrusionswerkzeugen durch CFD"
Online Event, June 20, 2006
Online-Seminar will be in German language
-
Short Course on Vibration Measurements by Laser Techniques
Course, Faculty of Engineering, Ancona, Italy, June 19, 2006
The one-day tutorial course aims at providing the fundamentals of Laser Techniques for Vibration Measurements and to offer hands-on experience on the most advanced instrumentation.
The program of the event will include theoretical lectures held by experts in the field in the morning and laboratory sessions in the afternoon.
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, June 19, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Summer School in Industrial CFD
Course, The University of Nottingham, Nottingham, United Kingdom, June 19, 2006
This will be the second running of this popular event
initially sponsored by EPSRC. The course aims to bridge
the knowledge gap faced by new CFD users and to enable
them to use CFD technology with more confidence. The
course is open to masters and PhD students as
well as industrialists. It focuses on the use of
commercial codes and calls on the experience of academics,
industrialists and code vendors who will form the
lecturing body.
-
Introduction to Icepak Training by Fluent
Course, Fluent Inc., Lebanon, United States, June 19, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Fluent Webinar "Kraftwerkstechnik"
Online Event, June 19, 2006
Online-Seminar will be in German language
-
FREE WEBINAR: How Customers are Succeeding with a Customized Version of FloWizard
Online Event, June 13, 2006
Fluent will be holding a web seminar on customization of
FloWizard and FLUENT. In this session we will present
several customer examples of process automation via the
customization of the FloWizard interface and GAMBIT
meshing. We will describe the benefits of how the
customization of the interface, meshing, solution
processes and postprocessing can impact an overall
development process. We will also conduct a general
overview of the methods utilized in the example
customizations.
-
Introduction to FLUENT Training
Course, Fluent Inc., Ann Arbor, United States, June 12, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to FLUENT Training
Course, Santa Clara, United States, June 12, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Wasserwirtschaft"
Online Event, June 12, 2006
Online-Seminar will be in German language
-
Fluent Webinar "Einsatzmoeglichkeiten und Nutzen von CFD in der Umwelttechnik - Luft"
Online Event, June 12, 2006
Online-Seminar will be in German language
-
CFD for Automotive Applications
Conference, ARAI, P.B. No. 832,, Pune 411004, India, June 12, 2006
For the first time, we have invited ANSYS, CSM
& FLUENT together to give best presentations of
their CFD packages viz. CFX, StarCD and FLUENT.
They will present overview, methodologies,
capabilities and case studies. After listening to the CFD
packages, the delegates will listen to
special speakers from Industry & Academia. These
speakers will present case studies for automotive
applications viz. powertrain, aerodynamics, HVAC, thermal
management, acoustics & paint technology.
-
Advanced CAD development - Course Announcement
Course, 768/12, PYC, Bhadarkar Road, Near Deccan,, Pune, India, June 10, 2006
Diploma in Advanced CAD Development - DACAD.
CCTech has launched course on CAD Development six months
training courses starting from August 2006. Course is
structured to cater to industrial requirements. The course
syllabus is formulated by considering industrial
requirements and inputs from various working professionals
and IIT faculty.
-
Advanced Modeling of Particulate and Pollutant Formation in Turbulent Combustion
Course, Politecnico di Torino, Torino, Italy, June 10, 2006
This course aims at introducing the most popular advanced
computational tools for particulate and pollutant formation
that can be effectively used to design low emission
turbulent combustion processes.
This course is addressed to master and PhD students in
engineering and science, post-docs and industrial
researchers working on simulation and modeling of single and
multiphase combustion processes.
-
Fluent Advanced Training: TGrid 4.0
Course, Fluent Inc., 3005 Boardwalk, Suite 100, Ann Arbor, United States, June 9, 2006
This course is for general TGrid users who are interested
in meshing complicated geometry. The program will have an
automotive focus, however, it is open to all TGrid
clients. Attendees must have completed TGrid introductory
training and it is recommended that they have at least one
year of experience using the software.
-
Introduction to Airpak Training by Fluent
Course, Fluent Inc., Lebanon, United States, June 7, 2006
The training course is a combination of lectures with
discussion and hands-on exercises to introduce the student
to the basics of using Airpak, to familiarize the student
with the user-interface, and also to begin a mutually
beneficial partnership.
-
CGNS Tutorial Session
Hyatt Regency Hotel at Embarcadero, San Francisco, United States, June 7, 2006
A short 2.5 hour tutorial session on the CFD General
Notation System (CGNS) will be held during the summer
American Institute of Aeronautics and Astronautics (AIAA)
meeting in San Francisco.
-
Turbulence Workshop
Workshop, Vestagatan 2B, Gothenburg, Sweden, June 7, 2006
Turbulence modelling is a key element in Computational
Fluid Dynamics (CFD). Despite this, a single mathematical
model that covers all kind of turbulent flows has not yet
been derived. Instead, an engineer must choose from a wide
range of different turbulence models, each having its
advantages and disadvantages. This is, however, not really
surprising since the objective of turbulence modelling is
to approximate an extremely complicated phenomenon.
-
Tour de France RAPID FLOW MODELING
Seminar, Paris, Toulouse, Lyon, France, June 7, 2006
Le Rapid Flow Modeling est un nouveau concept qui
s adresse aux designers, concepteurs ou ingenieurs metier.
Il leur permet de passer facilement et rapidement de la CAO
a la modelisation des ecoulements et des transferts
thermiques.
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, June 5, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to Icepak Training by Fluent
Course, Santa Clara, United States, June 5, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
CFD & VIV Symposium, OMAE 2006 Conference
Conference, Hamburg, Germany, June 4, 2006
Addresses the use of Computational Fluid Dynamics (CFD)
analysis in offshore applications, e.g. flow around bluff
bodies at high Reynolds numbers, guidelines for turbulence
modeling; benchmarking and validation of
analysis tools; green water effects on FPSOs; roll
damping; field data for validation and calibration of CFD
with design tools, etc. The symposium also includes non-
CFD issues related to VIV analysis and design methods and
experimental data on VIV.
-
Predict, Analyse and Minimize Flow-Induced Noise from CFD
Online Event, June 1, 2006
Learn how the aero-acoustics simulation tools from LMS
help you evaluate the noise from unsteady flow phenomena
like vortex shedding and turbulent boundary layers, by
coupling Computational Fluid Dynamics (CFD) methods with
Computational Acoustics.
-
COMPUTATIONAL ELECTRO MAGNETISM(CEM) & CALCULATION OF RADAR CROSS SECTION(RCS)
Workshop, CDAC, Knowledge Park, Old Madras Road, Byappanahalli, Bangalore, India, June 1, 2006
The workshop is aimed at training engineers and scientists
in Aerospace Laboratories /Industries /Academic Institutes,
who wish to include CEM as a routine analysis tool in their
design and analysis cycles.The course will be of use to
those who work in telecommunication and antenna designs.
-
Fluent's Fluid Mechanics and CFD Review Course
Course, Fluent Inc., Lebanon, United States, May 31, 2006
This two and a half-day course is intended for those users
who are new to CFD and who need an introduction (or re-
introduction) to fluid mechanics, heat transfer and
computational fluid dynamics.
-
Fluent Advanced Training: Spray & Particle Flow Modeling
Course, Fluent Inc., 3005 Boardwalk, Suite 100, Ann Arbor, United States, May 31, 2006
This course is for FLUENT users from the automotive
industry who are interested in modeling various automotive
spray and particle flow problems. Attendees must have
completed FLUENT introductory training and it is
recommended that they have at least one year of experience
using the software.
-
Multiphysics Simulation for MEMS Class: 5/30-6/1, Moffett Field, CA
Workshop, NASA AMES RESEARCH PARK BLDG 19 SUITE 2063, MOFFETT FIELD, United States, May 30, 2006
Ozen Engineering, Inc. and A.M. Fitzgerald & Associates,
LLC are offering an in-depth, three-day course on ANSYS
Multiphysics Simulation for MEMS, on May 30, 31, and June
1, 9am-5pm. This unique course will give you hands-on
experience with ANSYS/Multiphysics and practical knowledge
of FE modeling techniques for real-world MEMS devices.
-
CFD in Motorsports
Seminar, Monterey, United States, May 23, 2006
"High
Performance CFD for the Motorsports Industry" - Tuesday May
23rd at 1:30PM.
This session will focus on how CFD is used to extract maximum
performance in racing vehicles and powertrain systems.
-
2006 Fluent CFD Summit
User Conference, Hyatt Regency Monterey, 1 Old Golf Course Road, Monterey, United States, May 22, 2006
Attendees tell us year after year that the CFD Summit is
the one event all year they rely upon to get the latest
information about new technology developments in
computational fluid dynamics and what lies ahead in the
years to come. This year's program will be no exception
-
2006 Icepak Summit
User Conference, Hyatt Regency Monterey, Monterey, United States, May 22, 2006
This event is for engineers and managers looking to share
ideas on how to enhance the use of thermal modeling within
their electronics cooling design processes. Come and see
the newest applications and approaches using Icepak,
Icepro, Iceboard, Icechip, and Icewave. Learn about
upcoming developments in these products, as well as new
products that will be released in the coming months.
-
2006 Fluent Aerospace Symposium
Conference, Hyatt Regency, Monterey, United States, May 22, 2006
Join other aerospace CFD enthusiasts for two full days of
activities during this specialized track of the 2006 CFD
Summit.
-
2006 Fluent Electronics Fluids Modeling Symposium
Conference, Hyatt Regency, Monterey, United States, May 22, 2006
Analysts, designers, and engineering managers... we invite
you to join in the Symposium on Fluids Modeling for the
Electronics Industry. We have assembled world-class
speakers from major chip manufacturers and electronics
companies to talk about their successes and lessons
learned in the use of fluids modeling technology.
-
2006 Fluent Symposium on Fluids Modeling in the Healthcare Industry
Conference, Hyatt Regency, Monterey, United States, May 22, 2006
We invite you to join in the 1st Symposium on Fluids
Modeling in the Healthcare Industry. We have assembled
world-class speakers from major pharmaceutical and medical
device companies to talk about the use of fluids modeling
technology in the healthcare field.
-
Conferences Automobile & Modelisation des Ecoulements
Seminar, La Maison des Arts et Metiers, Paris, France, May 18, 2006
Cette annee ces conferences techniques ciblent les
avancees
technologiques de la suite logicielle FLUENT pour
l'industrie automobile. La progression du pre-traitement,
l'integration de l'outil CFD dans le PLM et les nouvelles
applications strategiques automobiles seront presentees.
-
Spray and Particle Flow Modeling for Automotive Applications
Online Event, May 18, 2006
Want to learn more about using CFD for your particle flow
and spray simulations? Then join Fluent for a one hour
online event and learn about the basic background of the
CFD models involved in spray modeling, examine test
validation results and come away with useful tips and
tricks for creating your own simulations.
Topics of interest:
-liquid injection and atomization
-particle erosion modeling
-particle separation in cyclone devices
-
Conferences Modelisation des Ecoulements Multiphasiques
Seminar, La Maison de la Recherche - 54, rue de Varenne, Paris 75007, France, May 17, 2006
Fluidisation de particules, trajectoires de gouttelettes,
coalescence de bulles sont autant de sujets d etude pour
les industriels et chercheurs engages dans l amelioration
de procedes.
Bien utilisee, la simulation numerique s affirme
aujourd hui comme un puissant outil d analyse et de
comprehension de ces phenomenes.
-
Gridgen Standard Training Course
Seminar, 213 South Jennings Avenue, Fort Worth, United States, May 16, 2006
The Gridgen Standard Training Course includes three days
covering both basic and advanced Gridgen usage. The most
commonly used GUI commands and efficient tools for making
grids quickly are thoroughly explained. The training course
progresses to more advanced tools and how to work with
difficult topologies and geometry models. Tutorials will
demonstrate the topics discussed and allow attendees their
own practice time with the newly learned tools.
-
Advances in Axial Compresson Aerodynamics
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, May 15, 2006
The course starts with an overview on the complex flow field encountered in compressors
-
Introduction to Icepak Training by Fluent
Course, Fluent Inc., Austin, United States, May 15, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Flow Simulation in Industry
Seminar, HOTEL-MONS, Ljubljana, Slovenia, May 12, 2006
Fluent Europe Ltd. & SimTec Ltd. organize an one-day
FLUENT
seminar at the HOTEL-MONS (www.hotel.mons.si), in
Ljubljana - Slovenia on the 12th of May.
-
Advanced Thermal Modeling Course by Fluent
Course, Santa Clara, United States, May 11, 2006
This is a one-day advanced course that deals with advanced
thermal systems and concepts. It includes modeling of
PCBs, IC packages, interface resistances, altitude
effects, radiation, heat pipes, joule heating,
thermoelectric coolers, transformers, cold plates,
baffles, wall effects, and external heaters/coolers.
-
Introduction to Airpak Training by Fluent
Course, Fluent Inc., Lebanon, United States, May 10, 2006
The training course is a combination of lectures with
discussion and hands-on exercises to introduce the student
to the basics of using Airpak, to familiarize the student
with the user-interface, and also to begin a mutually
beneficial partnership.
-
Thermo-Hydralic Instabilities
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, May 8, 2006
The purpose of the course is to provide state-of-the-art information on
physical modelling, experimental and numerical simulation of thermohydraulic
instability phenomena.
-
Introduction to FLUENT Training
Course, Fluent Inc., Ann Arbor, United States, May 8, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, May 8, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to Icepak Training by Fluent
Course, Santa Clara, United States, May 8, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
2006 International ANSYS Conference
Conference, David L. Lawrence Convention Center, Pittsburgh, United States, May 2, 2006
The event brings together engineers and analysts worldwide from all disciplines of computer-aided engineering. This event will feature papers from users of ANSYS CFX CFD software as well as ANSYS ICEM CFD and ANSYS.
-
2006 International ANSYS Conference
User Conference, David L Lawrence Convention Center, Pittsburgh, United States, May 2, 2006
To better deploy simulation technology in your design
process, you can't afford to miss the 2006 International
ANSYS Conference. Scheduled May 2 through 4 in Pittsburgh,
Pennsylvania, U.S.A., the conference will focus on
unlocking the potential of simulation to streamline design
processes. The International ANSYS Conference showcases
advances in computer-aided engineering and related
technologies.
-
Computational Fluid Dynamics for Industrial Applications
Workshop, Indian Institute of Technology Bombay Powai, Mumbai, India, May 1, 2006
The major deterrents to the widespread use of CFD now are
lack of trained manpower and availability of accurate,
robust and versatile CFD software. The present course is
designed to introduce and train participants in the use CFD
for industrial applications. The theoretical lectures on
CFD
will be delivered by IIT Faculty and hands-on session will
be handled by Zeus Numerix and C-DAC.
-
Turbulence Modeling
Course, Westin Convention Center, Pittsburgh, United States, May 1, 2006
This course is taught by Dr. Florian Menter, an expert in
the field. It addresses turbulence modeling for the CFD
practitioner. And it provides an introduction to the
physics of turbulent flows and the effects of turbulence on
engineering problems. An important part of the course is
the discussion of the wall treatment of turbulence models
and the associated grid resolution requirements for
successful CFD simulations. The course also addresses
unsteady flow simulations.
-
CFD for Turbomachinery
Course, Westin Convention Center, Pittsburgh, United States, April 30, 2006
This two-day course dealing with the theoretical and
practical aspects of turbomachinery design and analysis
emphasizes the use of the ANSYS CFX computational fluid
dynamics code and related ANSYS tools.
-
Automatic Volume Grid Generation
Course, Westin Convention Center, Pittsburgh, United States, April 30, 2006
This course demonstrates how automatic tools in ANSYS ICEM
CFD and ANSYS AI*Environment are being developed to
eliminate meshing problems, including external aero and
automotive underhood.
-
Advanced Thermal Modeling Course by Fluent
Course, Fluent Inc., Lebanon, United States, April 27, 2006
This is a one-day advanced course that deals with advanced
thermal systems and concepts. It includes modeling of
PCBs, IC packages, interface resistances, altitude
effects, radiation, heat pipes, joule heating,
thermoelectric coolers, transformers, cold plates,
baffles, wall effects, and external heaters/coolers.
-
Fluent laedt ein: FloWizard-Workshop
Workshop, Zuerich, Switzerland, April 26, 2006
Rapid Flow Modeling: CFD-Power fuer den Konstruktions-Experten
-
Fluent laedt ein: FloWizard-Workshop
Workshop, Muenchen, Germany, April 25, 2006
Rapid Flow Modeling: CFD-Power fuer den Konstruktions-Experten
-
Computational Aeroacoustics
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, April 24, 2006
This EU sponsored course (EUA4X*) is intended to provide
the state-of-the-art review of the on-going activities in noise prediction.
-
Gridgen User Group Meeting 2006
User Conference, Sheraton Grand Hotel Dallas/Fort Worth Airport, Irving, United States, April 24, 2006
The Gridgen User Group meeting will include special
Gridgen training seminars and training activities,
presentations by Pointwise staff on new Gridgen
developments, user presentations, and exhibits by our
partners. This is a good opportunity for Computational
Fluid Dynamics (CFD) users to learn about the latest
Gridgen features, get a glimpse of Gridgen V16, and
network with other CFD experts from around the world.
-
Introduction to FLUENT Training
Course, Fluent Inc., Ann Arbor, United States, April 24, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, April 24, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to Icepak Training by Fluent
Course, Fluent Inc., Lebanon, United States, April 24, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Fluent laedt ein: FloWizard-Workshop
Workshop, Wien, Austria, April 23, 2006
Rapid Flow Modeling: CFD-Power fuer den Konstruktions-Experten
-
Free Rapid Flow Modeling Workshop for the Auto Industry
Workshop, St. John's Conference Center, Plymouth, United States, April 21, 2006
Fluent is pleased to host a free Rapid Flow Modeling
Workshop for the Automotive Industry:
Moving CFD Into the Design Process - An Inside Look at
FloWizard
Get a live demonstration of FloWizard, plus see several
case studies showing how top automotive companies are
using this software to move CFD onto the desktops of
design engineers to minimize product costs while
increasing product quality. Participants qualify for a
free software trial.
-
Fluent Advanced Training: Acoustics Modeling
Course, Fluent Inc., 3005 Boardwalk, Suite 100, Ann Arbor, United States, April 20, 2006
This course is for FLUENT users from the automotive
industry who are interested in modeling various automotive
acoustics problems. Attendees must have completed FLUENT
introductory training and it is recommended that they have
at least one year of experience using the software.
-
Webseminar - Aero-Acoustics: Flow Induced Noise Simulation
Online Event, April 20, 2006
In this web seminar you will learn how to:
- Model flow-induced noise.
- Find the root cause of flow-induced noise problems fast
- Improve the noise characteristics of your product and
minimize design risk
-
Fluent Advanced Training: Modeling Positive Displacement Pumps
Course, Fluent Inc., 3005 Boardwalk, Suite 100, Ann Arbor, United States, April 18, 2006
This course is for FLUENT users from the automotive
industry who are interested in modeling various positive
displacement pumps. Attendees must have completed FLUENT
introductory training and it is recommended that they have
at least one year of experience using the software.
-
Improving the Energy Efficiency of a Secondary Aluminum Plant Through a Plantwide Assessment
Online Event, April 13, 2006
This online seminar is intended to demonstrate how
measurements and modeling can result in significant energy
savings in a secondary aluminum plant.
-
Introduction to Airpak Training by Fluent
Course, Fluent Inc., Lebanon, United States, April 12, 2006
The training course is a combination of lectures with
discussion and hands-on exercises to introduce the student
to the basics of using Airpak, to familiarize the student
with the user-interface, and also to begin a mutually
beneficial partnership.
-
Fluent Advanced Training: Climate Control System Modeling
Course, Fluent Inc., 3005 Boardwalk, Suite 100, Ann Arbor, United States, April 12, 2006
This course is for FLUENT users from the automotive
industry who are interested in modeling various
engineering problems related to ACCS. Attendees must have
completed FLUENT introductory training and it is
recommended that they have at least one year of experience
using the software.
-
Fluent Advanced Training: Underhood & Underbody Thermal Modeling
Course, Fluent Inc., 3005 Boardwalk, Suite 100, Ann Arbor, United States, April 11, 2006
This course is for FLUENT users in the automotive industry
who are interested in expanding their modeling knowledge
in the areas of underhood and underbody thermal analysis.
Attendees must have completed FLUENT introductory training
and it is recommended that they have at least one year of
experience using the software.
-
Introduction to Icepak Training by Fluent
Course, Santa Clara, United States, April 10, 2006
New users of Icepak software should register for the three-
day introductory training course.
-
Introduction to FLUENT Training
Course, Fluent Inc., Lebanon, United States, April 10, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
-
Introduction to POLYFLOW Training by Fluent
Course, Fluent Inc., Lebanon, United States, April 10, 2006
This course is intended for people who have had little or
no experience using POLYFLOW. New users of the software
should register for the four-day training course.
-
PLMO avec NOESIS Solutions
Seminar, La Maison des Polytechniciens - 12 rue de Poitiers, Paris 75007, France, April 6, 2006
Seminaire anime par Dassault Systemes, Noesis Solutions,
LMS France et Fluent France
-
Fluent laedt ein: Process Simulation Day
Workshop, Basel, Switzerland, April 4, 2006
Fluid Flow Analysis within the Pharmazeutical Industry
focussing on various areas ranging from the optimization of
bioreactors and fludized beds to drug delivey into the lung.
-
Turbulence Workshop
Workshop, Vestagatan 2B, Gothenburg, Sweden, April 3, 2006
Subjects such as basic turbulence theory, meshing
strategies for turbulence simulations and advanced
turbulence modeling will be covered in this Workshop.
-
Introduction to FLUENT Training
Course, Los Angeles, United States, April 3, 2006
This course is intended for people who have had little or
no experience with FLUENT. New users of the software
should register for the five-day training course
|
