-
One Month course on Advanced CFD analysis from 15-January-2017 (Morning and Evening batch)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 15, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
International Bhurban Conference on Applied Sciences and Technology (IBCAST)
Conference, National Centre for Physics (NCP), Quaid-i-Azam University, Islamabad, Pakistan, January 10, 2017
Starting from the year 2002, the IBCAST is being held
consecutively for over a decade. Until the year 2005,
four technological areas namely; Advanced Materials,
Control Engineering, Computational Fluid Dynamics and
Wireless Communication & Radar were covered. Later, four
more research areas - Biomedical Sciences, Cyber
Security, Medical Sciences and Underwater Technologies
were included. In 2015, another research area
Aerostructures was also included in the conference.
-
AxSTREAM 3 Day Workshop
Course, Bangalore, India, January 4, 2017
This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
One Month course on Advanced CFD analysis from 02-January-2017 (Morning and Evening batch)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 2, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Axial & Centrifugal Pumps Fundamentals
Course, Bangalore, India, January 2, 2017
This course will lay the groundwork required for all
engineers who are involved in design, optimization and
operation of pumps.
-
fast Track Batch on CFD with OpenFOAM
Course, Chinchwad, Pune, India, January 1, 2017
This course is for you, if you are:
New to OpenFOAM || You have partial training in OpenFOAM ||
Want to develop proficiency in CFD / OpenFOAM || Want to
simplify the use of OpenFOAM || PG Student, Research
Scholar, starting career in CFD || R&D person either in
industry / lab etc
-
Free Webinar: XFlow Aeroacoustics the Analysis of the LAGOON Landing Gear
Conference, Algeria, January 1, 2017
Join this Free XFlow Webinar about the Aeroacoustics the
Analysis of the LAGOON Landing Gear next March 23rd 2017 at
5:00 pm CET:
https://attendee.gotowebinar.com/register/7225586178773928194
-
ADT | Global TURBOdesign Symposium 2017
Conference, Holiday Inn Bloomsbury, London, United Kingdom, January 1, 2017
Global TURBOdesign Symposium, 6th & 7th November 2017!
http://bit.ly/2sXr1Y8
The event will bring together users from customers,
partners, and
designers interested in the unique capabilities of 3D
inverse design
technology applied to the design and optimization of
turbomachinery
components highlight, in hands-on presentations, their
best
practices, challenges, and achievements.
-
Product Design and Innovation using CFD and FEM
Workshop, IIT (B.H.U), Mechanical Engineering Department, Varanasi, India, December 27, 2016
Engineers, graduate students including masters and PhD
students study lots of theory on Computer Aided Engineering
(CAE), specially on Finite Element Method (FEM) and
Computational Fluid Dynamics (CFD) but when comes to the
application of theory. This short course would help Industry
Engineers and
Designers, Academic Institutions Faculty, Post Graduate and
Research
students in designs based on 21st Century Approach
“Simulation Based Engineering Approach".
-
Twelfth International Conference of Fluid Dynamics (ICFD12)
Conference, Le Méridien Pyramids Hotel , Cairo, Egypt, December 19, 2016
The goals of the conference are to provide a forum for the
development of experimental and computational methods and
tools, to foster cross-fertilization among different fields
of application, and most notably to enable communication
between the scientists and researchers who build the theory
and applicants who use it in fluid dynamics. The conference
program will consist of presentations on subjects ranging
from basic science reach to solid applications.
-
3rd International Conference on Computational Methods in Engineering and Health Sciences , Dec 2016, Japan
Conference, Tobata Campus, Kyushu Institute of Technology, Kitakyushu, Japan, December 17, 2016
Two day International Conference on Computational Methods in
Engineering and Health Sciences (ICCMEH-2016) serves the
purpose of bringing together the computational scientists and
engineers and medical fraternity from various
interdisciplinary domains under a common forum. The theme of
this conference will be broad covering several analytical and
numerical techniques, and novel applications of computational
techniques to solve problems in engineering, health sciences
disciplines
-
6th International & 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016)
Conference, Department of Applied Mechanics, Allahabad, India, December 15, 2016
FMFP is the most important conferences in the area of
Fluid Mechanics and Fluid Power in India organised at one
of the premier institutions of India every year under the
aegis of the National Society of Fluid Mechanics and
Fluid Power.
-
What’s New in FLOW-3D v11.2
Online Event, December 15, 2016
Please join Flow Science engineers for a webinar where they
will discuss the latest developments in FLOW-3D v11.2.
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-December-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 4 hours per day , Lab/practical training 4 hours
per
day.
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-December-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Evening batch for working professionals: 5: 30 Pm onwards
Morning batch from : 10:30 AM onwards
-
Best practices for forced and natural convection cooling simulations
Online Event, December 15, 2016
Basic sizing calculations, as well as the detailed
simulation steps, will be covered to best equip the
thermal engineer to effectively use simulation to aid and
guide the demanding task of reliable system design.
-
Simulating Vehicle HVAC Systems
Workshop, Doubletree Suites Chicago-Downers Grove, Downers Grove, United States, December 15, 2016
This workshop will showcase various software tools,
models, and coupling techniques used by today’s engineers
to achieve better design, faster. Ranging from fast and
efficient CFD "pre-thru post-processing" in STAR-CCM+®
software, to more advanced modeling such as de-ice/defog
and cabin heatup/cool down simulation. You will also
learn about 1D-3D system simulation coupling, as well as
the exciting possibilities design
exploration/optimization can bring to the design process.
-
Automotive Lighting - A Spotlight on Solar Radiation
Online Event, December 14, 2016
This web seminar will focus on the simulation of solar
radiation and its impact on hot spots and resulting maximum
temperatures.
-
How to add CFD into a fluid mechanics course
Online Event, December 13, 2016
Penn State professor John M. Cimbala, co-author of Fluid
Mechanics: Fundamentals and Applications, will
demonstrate how tutorial materials and videos can be
combined with engineering simulation software to increase
the understanding of basic CFD concepts while also
enhancing students’ knowledge about fluid flow. Using
class-tested materials and homework samples, Professor
Cimbala will highlight proven teaching methods to prepare
students for basic CFD modeling.
-
Hands-on Workshop on Computational Fluid Dynamics
Workshop, DEE, National Institute of Technology, Tiruchirappalli, India, December 12, 2016
This course will provide core knowledge on the
fundamentals of CFD for engineers, and an introduction to
the methods and analysis techniques used in CFD.
• It also provides an introduction to the use of
commercial
CFD codes to analyze internal and external flow heat
transfer, multiphase and combustion problems of practical
engineering interest.
-
10days certificate course on "Hydrodynamic stability and dynamo theory"
Course, National Institute of Technology, warangal, warangal, India, December 9, 2016
During the course the following topics will be covered
Foundations of Magnetohydrodynamics, Dynamics of Rotating
Fluids, Numerical Simulations of Dynamos and Natural Dynamos.
-
Admixtus is the time and cost saving solution for mixing engineers
Online Event, December 9, 2016
Attendees of this webinar will learn the basics of
performing a mixing simulation with Admixtus. A
demonstration by a technical expert will show the ease of
setting up such a simulation.
-
Computational Fluid Dynamics (CFD) with OpenFOAM
Course, Department of Mechanical Engineering, VNIT, Nagpur, India, December 8, 2016
The objective of the present training program is to
appreciate the open source CFD code OpenFOAM and simplify
OpenFOAM use. This training gives a platform to the
participant to understand OpenFOAM from basics to advanced
to programming level.
-
HPDC Webinar Series: Part III - Cooling & Solidification
Online Event, December 8, 2016
In Part III of our High Pressure Die Casting webinar series,
we will explore cooling and solidification simulations.
-
Web Seminar: ECS & Ducted Air Systems CFD Simulation - Modeling Complex System Interactions
Online Event, December 7, 2016
Modeling sub-system interactions of a full aerospace
aircraft management system during operation using
Thermo-fluid 1D-CFD simulation.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, December 1, 2016
Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
Classes - about 5 hours perday (Theory +
practicals).Theory most probably from 5 PM to 7 PM
(Monday to saturday)
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-December-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Evening batch for working professionals: 5: 30 Pm onwards
Morning batch from : 10:30 AM onwards
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-December-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 4 hours per day , Lab/practical training 4 hours
per
day.
-
LES4ICE'16
Conference, Rueil-Malmaison (near Paris), France, November 30, 2016
Large-Eddy Simulation for Internal Combustion Engines 2016
-
CFD Day – Simulation Makes the Difference
Seminar, Via Luigi Beccali, 4, MIlan, Italy, November 30, 2016
Free seminar in Milan, Italy. It is the first event in Italy
fully dedicated to CFD techniques and methodologies for
industry.
-
CFD Day 2016
Seminar, Via Lugi Beccali, 4, Milan, Italy, November 30, 2016
The role of thermal analysis in electronic design and in
complex fluid systems
-
Symposium on Innovative Simulations in Turbomachinery
Conference, SORAT Insel-Hotel, Regensburg, Germany, November 28, 2016
Invitation & Call for Presentations open: The symposium
on 28 & 29 November 2016 in Regensburg, Germany, will
offer a forum on innovative simulation technology for
all areas of turbomachinery.
-
Turbocharger Design
Course, United States, November 28, 2016
Our turbocharger design training will go over the
theoretical knowledge required to design, analyze and
optimize radial turbines and centrifugal compressors as
well as how to match them together.
-
Lloyd's Register's workshop on ship scale hydrodynamic computer simulation
Workshop, Lloyd’s Register's Global Technology Centre, Southampton, United Kingdom, November 25, 2016
Lloyd’s Register is hosting a ship scale hydrodynamics
simulation workshop on 25 November 2016, at their Global
Technology Centre in Southampton.
-
Axial and Centrifugal Pumps Design
Course, United States, November 21, 2016
For the purposes of this online course, we will be
focusing on what axial, radial and mixed-flow pumps are,
how they work, what their place is in thermodynamic
cycles, how to design them and so on.
-
Computational Fluid Dynamics (CFD) with OpenFOAM
Course, Department of Mechanical Engineering, VNIT, Nagpur, India, November 19, 2016
The objective of the present training program is to
appreciate the open source CFD code OpenFOAM and simplify
OpenFOAM use. This training gives a platform to the
participant to understand OpenFOAM from basics to advanced
to programming level.
-
Introducing the major new functionalities in TURBOdesign Suite v6.2
Online Event, November 17, 2016
The version 6.2 update to TURBOdesign Suite provides
significant new features and functionality to enable
designers to produce highly optimized designs faster than
ever before.
-
Introducing the major new functionality enabled in TURBOdesign Suite v6.2 for multi-disciplinary optimization of turbomachinery
Online Event, November 17, 2016
Register to see how the new features and enhancements in
TURBOdesign Suite 6.2 enable turbomachinery engineers to
produce breakthrough high-efficiency designs faster than
ever before.
-
A Guide to High-Fidelity CFD for Industry
Seminar, Falcon Hotel, Stratford upon Avon, United Kingdom, November 16, 2016
NAFEMS is excited to announce this one day seminar,
exploring the role of Grid Generation, HPC and Turbulence
Modelling.
Presentations will be made by leading industry and
academic experts, including representation by Jaguar Land
Rover, Frazer Nash, Dyson and EDF Energy.
A full agenda and registration can be found on the NAFEMS
website at
https://www.nafems.org/events/nafems/2016/guide-to-high-
fidelity-cfd-for-industry/.
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-November-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Evening batch for working professionals: 5: 30 Pm onwards
Morning batch from : 10:30 AM onwards
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-November-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 4 hours per day , Lab/practical training 4 hours
per
day.
-
HPDC Webinar Series: Part II - Filling
Online Event, November 15, 2016
In Part II of our High Pressure Die Casting webinar series,
we will explore filling simulations.
-
Expert course: Computational Fluid Dynamics (CFD) for maritime applications
Course, Haagsteeg 2, Wageningen, Netherlands, November 14, 2016
MARIN organises an expert course designed to reflect the
latest experience in the application of Computational
Fluid Dynamics (CFD) for ship design, offshore
engineering and renewable energy applications. To obtain
reliable and accurate CFD results for these applications,
application-specific choices and ‘best practice’ will be
presented.
-
Sunday batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),13-November-2016 (12 full Sundays)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 13, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.
-
International Conference on Computer Science , Engineering and Applied Science ( ICCSEAS 2016 )
Conference, Namba Oriental Hotel, 2-8-17 Sennichimae, Chuo Ward, Osaka, Japan, November 11, 2016
The ICCSEAS 2016 Conference offers a great opportunity to
bring together professors, researchers, Scientists,
Engineers, Academician and scholars around the globe a
great platform to deliver the latest innovative research
result and the most recent development and trends in
Computer Science , all kinds of engineering and applied
sciences field
-
Annual Meeting on Rheology
Conference, Meliá Alicante, Alicante, Spain, November 10, 2016
Rheology 2016 is a scientific gathering that guarantees
the offering, thoughts and ideas which will enable and
secure you the theme "Prism of Possibilities and
Potentialities to Illuminate Rheology Science''. It
provides a premier technical forum for reporting and
learning about the latest research and development, as
well as for launching new applications and technologies.
-
TRAINING: Internal Combustion Engine Modeling in CONVERGE
Course, 21500 Haggerty Road, Suite 120, Livonia, United States, November 9, 2016
This two-day course offers an introduction to
CONVERGE v2.3 for
internal combustion (IC) engine modeling. You will
learn about the
CONVERGE solver and modeling options while working
through a
typical IC engine case from start to finish.
-
Large Eddy Simulation (LES), hybrid LES-RANS, Detached Eddy Simulation (DES) and unsteady RANS.
Course, Chalmers University of Technology, Gothenburg, Sweden, November 9, 2016
A three-day course
-
AxSTREAM Workshop - Boston, MA,
Course, Boston, United States, November 9, 2016
This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
14th Multiphase Flow Workshop - Short Course and Conference
Conference, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany, November 8, 2016
Multiphase flows are of great interest to a large variety of
industries. The power generation, nuclear reactor
technology, food production, chemical process, aerospace and
automotive industries are all driving forces in this complex
field.
The goal of the workshop is to bring together experimental
and numerical practitioners, and to foster discussion and
exchange of knowledge.
Experts from both areas are called upon to present their
research and application results to a worldwide audience.
-
Mixing In Stirred Tanks - Live One Day Training - Dublin, Ireland, November 08, 2016
User Conference, New Horizons Ireland, Ireland, November 8, 2016
The course will review principles of mixing in stirred
tanks, provide recommendations for process design and
scale-up, plus enable participants to apply these
principles and recommendations to their mixing
processes/problems.
-
FloEFD Simulation Conference 2016
Conference, Frankfurt Marriott Hotel, Frankfurt, Germany, November 8, 2016
FloEFD combines the product design and
validation steps in one loop it allows engineers to keep
pace with rapid design changes.
The conference is a unique opportunity to meet
and network with other FloEFD users and exchange
information. It is also an excellent platform to talk
directly to the FloEFD development team and get first-
hand information regardless of whether you’re already
using FloEFD or considering adopting its use.
-
AxCYCLE for Organic Rankine Cycle Training Course
Course, 1500 District Avenue, Burlington, United States, November 8, 2016
This online-based training course provides participants
with the knowledge to perform Organic Rankine Cycles
(ORC) design, analysis and optimization.
-
TRAINING: Surface Preparation with CONVERGE
Course, 21500 Haggerty Road, Suite 120, Livonia, United States, November 7, 2016
This course offers an introduction to surface
preparation in CONVERGE
Studio v2.3.
-
International Conference on Computational Physics, Mathematics and It’s Application ( ICCPMA 2016 )
Conference, Keio Plaza Hotel, 2-2-1 Nishi-Shinjuku, Shinjuku-Ku, Tyoko, Japan, November 7, 2016
bring together computational scientists, leading
academics, researchers and research scholars to exchange
and share their experiences and research results about
all aspects of Computational Physics and Mathematics
-
ERCOFTAC-High Order Methods for Industrial CFD, 3-4 Nov 2016, NUMECA, Brussels, Belgium
Course, NUMECA, BRUSSELS, Belgium, November 3, 2016
Aims:Assess how HOM could impact general Industrial CFD in
the near future. Although the impact of HOM for RANS
simulations has still to be confirmed, the impact on
unsteady simulations, such as LES/DNS is already considered
as significant. Applications and methods are offered. Also,
how HOM can deliver higher accuracy, in shorter timescales,
thence, evaluate the potential of HOM. Q&A sessions ensure
the knowledge and techniques provided are well observed,
leading to capability in implementation.
-
ERCOFTAC - Best Practices in Combustion CFD - I.C. Engines, 2-3 Nov 2016, TU Darmstadt, Germany
Course, TU Darmstadt, Darmstadt, Germany, November 2, 2016
Design and operation of modern combustion I.C engines faces
the need of combining high efficiency with low pollutants
emissions. CFD has become a powerful tool in this sector.
Many models exist, each having a range of applicability,
computational cost and accuracy. Thus, CFD experts involved
in I.C. Engine simulations, given usual CFD skills, need
specific insight and knowledge in spray and combustion
modelling, in order to conduct thorough analysis. The
present course addresses this need.
-
Learn CFD with OpenFOAM
Course, Chinchwad, Pune, India, November 2, 2016
Course Overview
It is a balanced course for a beginner in CFD Field
The important prospect of this course, it allows the
participant to built up their understanding in all the
aspect to OpenFOAM as a general-purpose CFD Solver.
More than half of the time will be devoted on hands-on
sessions
-
Aerospace ECS – Thermo-Fluid System Simulation of Air Cycle Machines and Bleed Air Systems
Online Event, November 2, 2016
Thermo-fluid system simulation of air cycle machines and
bleed air systems in an aerospace air management systems
using 1D Computational Fluid Dynamics (CFD).
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, November 1, 2016
Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
Classes - about 5 hours perday (Theory +
practicals).Theory most probably from 5 PM to 7 PM
(Monday to saturday)
-
fast Track Batch on CFD with OpenFOAM
Course, Chinchwad, Pune, India, November 1, 2016
This course is for you, if you are:
New to OpenFOAM || You have partial training in OpenFOAM ||
Want to develop proficiency in CFD / OpenFOAM || Want to
simplify the use of OpenFOAM || PG Student, Research
Scholar, starting career in CFD || R&D person either in
industry / lab etc
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-November-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Evening batch for working professionals: 5: 30 Pm onwards
Morning batch from : 10:30 AM onwards
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-November-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Training Course Basic, intermediate and Advance (Lima - Perú)
Course, Av. Tupac Amaru 210 - Puerta 4B, Lima - Peru, Spain, October 31, 2016
Training basic and intermediate in the use of software
computational fluid dynamic open source (OpenFOAM). Teaching
knowledge in object orientation and c ++ programming
language and advanced concepts
applied to OpenFOAM.
-
ERCOFTAC - Uncertainty Management & Quantification in Industrial Analysis and Design, U. Ghent, Belgium, 27-28 October 2016
Course, Univ of Ghent, Ghent, Belgium, October 27, 2016
UM&Q is a new paradigm in industrial analysis and design as
it aims at taking into account the presence of numerous
uncertainties affecting the behaviour of physical systems.
Product success rests on careful management and control of
risk wrt interacting uncertainties. The aim is to share how
UM&Q is expressed in the fields of Aerospace, Formula 1 and
Power generation, and review emerging methods, techniques
and deployment.
-
Heatsink 201: Even More About Heatsink Design
Online Event, October 26, 2016
During this presentation, carrying on from Heatsink 101, we
will discuss in deeper depth how heatsinks work and explore
various heatsink design considerations.
-
Validations with OpenFOAM®
Online Event, October 20, 2016
Lets make simulation in OpenFOAM® more easier than
ever...
And gain insights on OpenFOAM® validations today with
live demonstrations!
-
6th EASN International Conference on Innovation in European Aeronautics Research
Conference, Porto, Portugal, October 18, 2016
The 6th EASN International Conference is designed to be the
year’s
leading forum for discussion and exchange of information
about state-
of-the-art research and development activities in
Aeronautics and Air
Transport.
-
The 7th International Symposium on Fluid Machinery and Fluids Engineering
Conference, LOTTE City Hotel, Jeju, South Korea, October 18, 2016
The 7th International Symposium on Fluid Machinery and
Fluids Engineering (ISFMFE-2016) will be held at LOTTE
City Hotel, Jeju, Korea on October 18-22, 2016. Over
time, the ISFMFE becomes one of the world’s most
important conferences for engineers and scientists for
fluid machinery and fluids engineering. The event will
focus on various areas in the fluid mechanics in
turbomachinery, heat transfer, design, thermo- and fluid
dynamics and micro and nano systems etc.
-
Altair Technology Conference ATCx - Getting Serious with CFD
User Conference, Poststrasse 6, Frankfurt, Germany, October 18, 2016
Auf der ATCx CFD erfahren Sie, wie branchenfuerhrende
Unternehmen einen simulationsgetriebenen Designprozess und
Altairs CFD Technologie erfolgreich anwenden, um innovative,
profitable Produkte schneller zu entwickeln. Geplant sind
Beitraege von: GKN, Magna Powertrain, SAS, Siemens, Stanley
Black & Decker, Street Scooter, Visteon und weiteren.
-
Mixing In Stirred Tanks - A One Day Training on October 18th, 2016 at IPA Education & Training Centre, Dublin, Ireland
Course, IPA Education & Training Centre, 57-61 Lansdowne Road, Ballsbri, Ballsbridge, Ireland, October 18, 2016
The course will review principles of mixing in stirred
tanks, provide recommendations for process design and
scale-up, plus enable participants to apply these
principles and recommendations to their mixing
processes/problems.
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-October-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-October-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 15, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Midwest OpenFOAM Users' Group Meeting
User Conference, 1701 Wright St., Madison, United States, October 15, 2016
OpenFOAM meeting on a variety of applications.
-
4th OpenFOAM User Conference 2016
Conference, Cologne, Germany, October 11, 2016
Bringing together users and developers of OpenFOAM
-
Easy FEA,CFD & Electromagnetics Simulation: Free ANSYS AIM Workshop
Workshop, 28 Charles Street, Stockport, United Kingdom, October 11, 2016
Join our complimentary workshop on 11th October to see
first-hand how ANSYS AIM R17.2 can help you solve your
toughest structural or fluid flow design challenges in a
single, easy-to-use environment.
-
ERCOFTAC CFD for Dispersed Multiphase Flows, VII, SWEREA, Stockholm, Sweden, 10-11 October 2016
Course, KTH, Stockholm, Sweden, October 10, 2016
The simultaneous presence of different phases in external or
internal flows such as gas, liquid and solid are found in
numerous industries, & termed multiphase flows. E.g. are
gas-liquid transportation, crude oil recovery, bubble column
reactors & spray for food processing. Existence of the
different phases requires a detailed understanding of the
interfacial transport phenomena. The course objective - a
BPG, latest trends & a trouble shooting session.
-
Sunday batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 09-October-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 9, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on Sundays 10 Am to 4 PM.Total duration
three months.
-
Applied CFD and FEM
Workshop, College of Enginnering, Cherthala, India, October 9, 2016
This course has been designed to provide SKILL to the
students/faculty/industry engineers on industry standard
tools and practices using Applied CFD and Applied FEM. At
the end of the course, the participants are expected learn
the theory as well as quality meshing and analysis
techniques of various types (1D, 2D, 3D in FEM, CFD problems)
-
Axial and Centrifugal Pumps Design Course - Boston, MA,
Course, United States, October 7, 2016
Our turbocharger design training will go over the
theoretical knowledge required to design, analyze and
optimize radial turbines and centrifugal compressors as
well as how to match them together.
-
Live Webinar: Water Resource Recovery Facilities
Online Event, October 6, 2016
Please join Flow Science for a live webinar that will focus
on modeling several key process units that are found in
Water Resource Recovery Facilities.
-
Mixing In Stirred Tanks - A One Day Training on October 5th, 2016 at New Burnswick,NJ.
Workshop, Rutgers University Inn and Conference Center, new brunswick, United States, October 5, 2016
The course will review principles of mixing in stirred
tanks, provide recommendations for process design and
scale-up, plus enable participants to apply these
principles and recommendations to their mixing
processes/problems.
-
NUMECA SEMINAR - TAKING YOUR TURBOMACHINERY DESIGN TO THE NEXT LEVEL!
Seminar, Marriott hotel, Zürich, Switzerland, October 3, 2016
Join us for a seminar in Turbomachinery Design and
discover our new integrated 1D to 3D offer in
collaboration with Concepts NREC.
-
OpenFOAM Course
Course, Euston House, 24 Eversholt Street, London, United Kingdom, October 3, 2016
OpenFOAM Foundation and Advanced trainings (each for 2 days)
bring the
essential knowledge of OpenFOAM software. After the
trainings the users will
be able to
run OpenFOAM cases, understand where to find relevant
information, use
efficiently snappyHexMesh mesh generator, use Function
Objects and other
features of OpenFOAM.
-
Advanced diploma on CFD analysis -300 hours Inhouse programme
Course, Niharika Institute of Computational Engineering, Bangalore, India, October 1, 2016
Course offered in two levels(level 01 and Level
02).Admission to level 02 is only for those who
successfully
completes level 01.
Please visit our website for more details.
http://nicecfd.com/advanced-diploma-on-cfd-analysis.php
Classes - about 5 hours perday (Theory +
practicals).Theory most probably from 5 PM to 7 PM
(Monday to saturday)
-
One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-October-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-October-2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 3 hours
per
day.
-
Free Webinar: Rocket Engine Turbopump
Online Event, September 29, 2016
This one-hour webinar begins with a brief introduction to
liquid rocket engines and rapidly brings attendees to the
design and optimization of turbopumps in the AxSTREAM®
platform. At the turbomachinery component level a
turbopump reduces to the fuel pump, oxidizer pump, and
turbine which are discussed in the webinar.
-
Aerospace ECS – Cabin Design and Analysis Using Thermo-Fluid System Simulation
Online Event, September 29, 2016
View this presentation to learn about thermo-fluid system
design for a cabin distribution in an aerospace
environmental control system using 1D CFD.
-
Increasing CFD Simulation Throughput for Real, Complete Pump Systems
Online Event, September 29, 2016
By participating in this webinar, you will gain a greater
understanding of how to Ssimulate complex flow behavior
in real, complete pump systems by using 3-D CAD geometry
as-is – without needing to simplify your systems and
introduce approximations which reduce the accuracy of
your simulation results - and more!
-
Introduction to CFD Analysis for Chemical Process Engineers An Online Instructor Led Training Course
Online Event, September 28, 2016
The objective of the course is to introduce process
engineers to CFD analysis and discuss how CFD results can
be used to solving mixing problems. The course will cover
the basic aspects of CFD.
-
Advanced Simulation for Internal Combustion Engines (ICE)
Workshop, Mövenpick Hotel Nürnberg Airport, Nuremberg, Germany, September 28, 2016
Please join us for the workshop on September 28, 2016, to
hear firsthand about the benchmark results and
development efforts for both STAR-CD/es-ice and STAR-
CCM+® solutions. Specialists will highlight advanced
developments and workflow automation, and how they are
delivering added value and time savings to ICE customers.
-
Better Medical Device Design, Faster
Online Event, September 28, 2016
This webinar will show the latest advancements in the
integration of simulation and PLM technologies to help
you Design Better Medical Devices, Faster. Presenters
will highlight tools that are available to help improve
not only your design process, but specifically benchtop
tests and in vitro and in vivo tests. This online event
will also address how to better document and track your
work and to accelerate the clinical trial approval
process.
-
Fluid Dynamics Workshop
Workshop, Provinciehuis Vlaams-Brabant, Leuven, Netherlands, September 27, 2016
Fluid flow is involved in many engineering applications.
Discover the power of COMSOL Multiphysics for fluid
dynamics
analysis and any multiphysics application involving fluid
flow
in this workshop.
-
XFlow Practical Free Webinar to learn how to run XFlow/MSC Nastran FSI Co-Simulations
Online Event, September 27, 2016
Join our Free and Public webinar next September 27th 2016 at
10:00 AM or 6:00 PM CEST. This webinar will be about the FSI
Co-simulations capability between XFlow and MSC Nastran. In
this webinar, you will learn how to run a co-simulation of a
spacecraft parachute and co-simulation of an elastic beam.
-
CFD for Microfluidics & Biomedical Flows - Workshop
Workshop, Warsaw, Poland, September 26, 2016
QuickerSim is giving a 2-day workshop focused on biomedical
and microfluidic simulations in QuickerSim CFD Toolbox.
-
3-Day AxCYCLETraining Workshop
Course, 1500 District Avenue, Burlington, United States, September 26, 2016
This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™. During this
interactive, hands-on workshop, engineers will use the
AxCYCLE™ software to successfully perform modeling and
simulation of thermodynamic cycles at design and off-
design conditions as well as undertake optimization
tasks.
-
2016 FLOW-3D Americas Users Conference
User Conference, Warwick Allerton Hotel, Chicago, United States, September 22, 2016
Flow Science's annual FLOW-3D Americas Users Conference is
an exciting event where users advance their simulation
skills through interactions with Flow Science staff
engineers, collaboration with other users, exploring new
modeling approaches, and learning about the latest FLOW-3D
features — this year in the home of deep-dish pizza, Second
City Improv, and the Miracle Mile.
-
Discover Better Reactor Designs, Faster Through Computational Fluid Dynamics
Workshop, Manchester United Limited, Manchester, United Kingdom, September 22, 2016
This workshop will demonstrate how CFD simulation and
modeling have become critical components for examining
and adapting new designs, reducing operational costs, and
guiding regulatory priorities and practices in the civil
nuclear industry and military applications. Guest
speakers include Dr. Afaque Shams, Research Consultant at
NRG, Dr. Nicolas Goreaud, Section Manager at AREVA NP and
Dr. Emilio Baglietto, professor at MIT.
-
Fluid Dynamics Workshop
Workshop, Rontgenlaan 37, Zoetermeer, Netherlands, September 22, 2016
Fluid flow is involved in many engineering applications.
Discover the power of COMSOL Multiphysics for fluid dynamics
analysis and any multiphysics application involving fluid flow
in this workshop.
|
