-
Flipping the Classroom: Strategies for Success in Engineering
Online Event, September 10, 2015
In this online event, Professor Ron Averill discusses
examples of the flipped model used at Michigan State
University and will explore different teaching
approaches. The advantages of lifelong learning and
relevant learning tools that can prepare engineers for
the transition to industry will be discussed. Engineering
professors, students and researchers can learn how and
why the use of this unique learning approach by a wide
range of industries continues to grow.
-
Multidisciplinary Earth Sciences Symposium (Prague, 2015)
Conference, Prague, Czech Republic, September 7, 2015
This symposium aims at presenting and discussing integrated
studies on the environment, particularly in the session
'Environmental impact on infrastructures'
-
Advanced Methods in Computational Fluid Dynamics
Course, School of MACE, The University of Manchester, Manchester, United Kingdom, September 7, 2015
The course consists of two parts: theoretical course on
advanced CFD approaches and tutorials with open-source
solver Code_Saturne. The main focus of the first part will
be on RANS models, LES and DNS for turbulent flows,
fluid-structure interaction methods, compressible flows and
aeroacoustics. The second part of the course will be held at
the Science & Technology Facilities Council (STFC) and is
devoted to learning the use of open-source CFD solver
Code_Saturne.
-
Reliability Training: Effective FMEA Seminar Series
Course, Stockport, United Kingdom, September 7, 2015
The Effective FMEA Seminar Series is composed of two
course sessions, taught over five days. Although you can
register for each session individually, we recommend that
new students start with the full five-day package. D470A
“Foundations of Effective FMEAs” is a prerequisite for
D470B “FMEA Facilitation and Application Skills.”
-
OpenFOAM Introductory Course
Course, Via Montallegro 1, Genova, Italy, September 7, 2015
The training course is aimed to those with little or no
experience in the use of OpenFOAM, or for those who want to
improve their skills using OpenFOAM as a general-purpose CFD
and Multiphysics solver as well as other meshing and
post-processing Open Source tools.
-
Using CFD to Support the Design and Operation of Offshore Vessels
Online Event, September 3, 2015
If you are involved in the design or operation of
offshore vessels and are interested in learning how
industry leaders such as Heerema Marine Contractors (HMC)
are using CFD as part of the Naval Architect’s toolkit,
this webinar is for you.
-
One month course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 02 nd September 2015
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, September 2, 2015
One month course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Class duration: 3 hours per day (Monday to
Friday), 3 Pm to 5.30 PM on Saturday and Sunday
-
Conference on Modeling Fluid Flow (CMFF'15)
Conference, Danubius Hotel Gellert, Budapest, Hungary, September 1, 2015
The aim of the Conference is to respond
to challenges in the rapidly developing fields of fluid
mechanics: numerical simulation of
flows and physical modelling of flow processes using
advanced measurement methods.
-
IMA Numerical Methods for Simulation
Conference, Oxford, United Kingdom, September 1, 2015
Numerical methods are important in diverse areas such as
geophysical modelling, fluid-structure interaction, high-
dimensional dynamical systems, weather prediction, climate
modelling, oil reservoir simulation, and so on.
-
NUMAP-FOAM 2015
Workshop, Ivana Lucica 5, Zagreb, Croatia, August 24, 2015
Ninth edition of the NUMAP-FOAM for graduate students and
young researchers in Zagreb in Zagreb in August and
September 2015
-
Workshop for Multi-Disciplinary and Multi-Objective Design Optimisation
Workshop, The Venture Centre, Sir William Lyons Rd, COVENTRY, United Kingdom, August 20, 2015
Understand how worthwhile it is to implement design
optimisation to overcome the increasing market
challenges. modeFRONTIER is used in various engineering
disciplines and for numerous applications, supporting
designers and engineers, operating in all industrial
sectors, to identify the best design solutions.
-
Get Hands-on with Multiphysics & Coupled Analysis: Introductory Workshop with live tutorials & demos
Workshop, Stockport, United Kingdom, August 19, 2015
Join our complimentary workshop on 19th August to see
first-hand how ANSYS AIM can help you to solve your
toughest multiphysics design challenges in a single,
easy-to-use environment.
-
Advanced training on Aerospace CFD
Online Event, August 17, 2015
Advanced level course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Class timings,Morning: 6 Am to 8 PM (IST)
-
Online course on Advanced CFD
Online Event, August 17, 2015
100 % Interactive online sessions through skype/desktop
sharing, from NICE CFD
-
Week end course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 15 th August 2015
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, August 15, 2015
8 weeks course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Class timings, 9.30 AM to 2 PM on Saturday and Sunday.
-
International Workshop on Numerical Simulation for Multimaterial and Multiphysics Flows
Workshop, No.6 Huayuan Road, Beijing, China, August 14, 2015
The objective of the workshop is to bring together experts,
researchers and students with interest in numerical
simulation for multimaterial and multiphysics flows and
their application in science and engineering fields.
-
International Workshop on "Advances in Applications of Computational Fluid Dynamics" (ACFD-2015) including OpenFOAM
Workshop, Motilal Nehru National Institute of Technology, Allahabad, India, August 12, 2015
This workshop is ideal for practicing engineers, faculty
and research students who have basic background in either
fluid dynamics or numerical methods and wish to use CFD
to solve real life/research problems. The workshop is
designed to make the participants learn from basics of
CFD to the use of open source CFD to a variety of real
life problems.
-
Webinar: System Reliability Modelling Using BlockSim
Online Event, August 4, 2015
Join our webinar on 4th August to learn how to model the
simplest or most complex systems and processes using
reliability block diagrams (RBDs) and fault tree analysis
(FTA)
-
Academic STAR-CCM+ Workshop for Group Design Project Competition Teams
Workshop, NH Heidelberg, Bergheimer Str. 91, Heidelberg, Canada, August 3, 2015
You are invited to our free workshop on August 3 in
Heidelberg, Germany. This is a chance to learn about our
FST sponsorship package (free training, support, and
licensing) and our easy-to-use, state-of-the-art
multidisciplinary simulation software STAR-CCM+®. During
this workshop, we will show how the software can be used
to enhance the performance of your car in the areas of
aerodynamics and vehicle thermal management.
-
SEMINAR : Design & Optimization of Rotating Equipment
Seminar, UTM (Universiti Teknologi Malaysia), Skudai, Malaysia, July 29, 2015
The seminar touches on design & optimization for any
rotating machine includes pump, propeller, turbocharger,
turbomachinery, gas turbine, wind turbine, fan, blower
and etc. The seminar focuses on FLUID DYNAMICS
optimization.
-
Webinar: Understand Product Performance with Life Data Analysis using Weibull
Online Event, July 28, 2015
Join our webinar on 28th July to learn about the latest
tools and techniques that will enable you to better
understand and communicate how your products will perform
over time.
-
International Symposium of High-order Methods for CFD
Conference, San Diego, United States, July 26, 2015
International Symposium of High-order Methods for
Computational Fluid Dynamics under the 13th USNCCM
-
A One Day Training on Mixing In Stirred Tanks - July 20, 22 & 23
Course, Boston, New Brunswick, Philadelphia, United States, July 20, 2015
Gain Insights with Live Demonstrations and Problem Solving
Sessions on Process Design, Scale-up and Mixing Processes in
Stirred Tanks.
-
Webinar: Introduction to Reliability Principles
Online Event, July 15, 2015
Join our webinar on 15th July to see what is meant by
Reliability, how to measure it and the various
reliability tools and techniques that are available to
help you meet design requirements and reduce life-cycle
costs.
-
Get Hands-On with 1D System-Level CFD: Introductory Workshop with live tutorials and demos
Workshop, Stockport, United Kingdom, July 14, 2015
Join our exclusive workshop aimed at engineers interested
in undertaking 1D system-level fluid flow simulation –
for efficient early stage design & validation or in
conjunction with 3D CFD software for detailed product &
process development.
-
Introductory Course in OpenFOAM
Course, Via Montallegro 1, Genova, Italy, July 13, 2015
The training course is aimed to those with little or no
experience in the use of OpenFOAM, or for those who want to
improve their skills using OpenFOAM as a general-purpose
CFD and Multiphysics solver as well as other meshing and
post-processing Open Source tools.
-
Next Generation Computational Fluid Dynamics
Conference, Chesford Grange, Kenilworth, United Kingdom, July 7, 2015
Are you looking for CFD technology which will allow you
to solve design problems more quickly, more accurately
and more easily? See how companies such as Advanced
Manufacturing Research
Centre, CREO Dynamics, Jaguar Land Rover, Lockheed
Martin, Prodrive and more are leveraging AcuSolve to
achieve more efficient development cycles and in turn
developing truly innovative, profitable products faster.
-
Using Electrochemistry Modeling to Optimize Production and Design
Online Event, June 30, 2015
This webinar will demonstrate how new advances in
electrochemistry technology can be used to provide
insight into the design of manufacturing processes or
product optimization.
-
10th OpenFOAM Workshop
Workshop, University of Michigan, Ann Arbor, United States, June 29, 2015
The 10th edition of the OpenFOAM Workshop provides a forum for
researchers, industrial users, software developers,
consultants and
academics working with OpenFOAM. As a part of the program, free
introductory
and advanced OpenFOAM training will be provided by the code
developers
and experts in the field.
-
Hydro-Acoustic simulation for Marine Propellers
Online Event, June 25, 2015
Join NUMECA for a free webinar in two sessions!
-
Subsurface Applications: Flow & Thermal Simulation in the Design of Downhole Tools and Completions
Workshop, Houston Marriott Energy Corridor, Houston, United States, June 23, 2015
This educational seminar will share how the sub-surface
world is using flow and thermal simulation in its design
processes.
-
FINE/Turbo v10.1: new features webcast!
Online Event, June 23, 2015
Join NUMECA on June 23 for a free webinar in two sessions
-
Workshop for Multi-Disciplinary and Multi-Objective Design Optimisation
Workshop, The Venture Centre, Sir William Lyons Rd, COVENTRY, United Kingdom, June 22, 2015
Understand how worthwhile it is to implement design
optimisation to overcome the increasing market
challenges. modeFRONTIER is used in various engineering
disciplines and for numerous applications, supporting
designers and engineers, operating in all industrial
sectors, to identify the best design solutions.
-
Training Programme on 'Computational Fluid Dynamics' (CFD-2015) at MNNIT Allahabad during 22-26 June 2015
Workshop, Motilal Nehru National Institute of Technology Allahabad, Allahabad, India, June 22, 2015
This Training programme on 'Computational Fluid Dynamics
(CFD-2015)' is ideal for practicing engineers, faculty
and students who has basic background in either fluid
dynamics or numerical methods and wish to use CFD in
future. No prior knowledge of CFD is necessary. However,
prior knowledge will be helpful to learn about its
efficient use for variety of problems.
This is the third consecutive year, the highly successful
STTP on CFD is being organized.
-
FUN3D Training Workshop
Workshop, Hilton Anatole, Dallas, United States, June 20, 2015
This workshop will provide participants with guidance on how
to install and execute the NASA Langley Research Center
FUN3D computational fluid dynamics software for common
aerospace applications.
-
Weekend batch of CFD course (ANSYS FLUENT,CFX and ICEMCFD HEXA)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, June 20, 2015
Two months weekend course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on saturday 4 PM to 8 PM,Sunday 10 AM
to 2PM or 4 Pm to 8 PM.
-
Advanced Course in optimization technique coupling DAKOTA with OpenFOAM
Course, Via Montallegro 1, Genova, Italy, June 18, 2015
Optimization is the act of obtaining the best result under
given circumstances. As every other simulation software,
OpenFOAM® can be used as a black-box
tool and embedded in an optimization loop, striving for the
optimum! In this course we will use Dakota as optimization
driver software.importance in many practical applications.
This course wants
to present the state-of-the-art different simulation
techniques and their implementation in OpenFOAM®.
-
Discover Better Designs, Faster
Workshop, Courtyard Newark Silicon Valley, Newark, United States, June 18, 2015
Imagine achieving better product designs, faster and with
less testing or doing a lot of manual work. That kind of
workflow process and capability is here now. To
experience this for yourself, we are pleased to invite
you to a complimentary workshop that will show you how
easy design exploration can be.
-
Advanced Course in OpenFOAM: meshing using open-source tools
Course, Via Montallegro 1, Genova, Italy, June 17, 2015
An advanced course oriented to those who want to make an
effective use of OpenFOAM® to create high quality meshes for
diversified real engineering purposes.
-
Webinar: Optimising Product Design using ANSYS CFD
Online Event, June 16, 2015
Join our webinar on Wednesday June 3rd as we show how
ANSYS CFD optimisation tools have been used at Forum
Energy Technologies, Northvale Korting and other
companies to design superior products.
-
Advanced Course in OpenFOAM: multiphase flows
Course, Via Montallegro 1, Genova, Italy, June 15, 2015
Multiphase flows are widespread in nature and of uttermost
importance in many practical applications. This course wants
to present the state-of-the-art different simulation
techniques and their implementation in OpenFOAM®.
-
Third Symposium on OpenFOAM in Wind Energy
Conference, Milano, Italy, June 15, 2015
The Third Symposium on OpenFOAM® in Wind Energy (SOWE) is
co-hosted by 'Dipartimento di Meccanica' and
'Dipartimento di Energia' at Politecnico di Milano,
bringing together people who use OpenFOAM® for wind
energy applications. The symposium aims to present the
state of the art in wind energy computational approach
using OpenFOAM®, allowing people to share knowledge, and
identifying common problems that should be addressed.
-
I North and Northeast CFD Workshop applied to Engineering
Workshop, Garden Hotel (http://www.gardenhotelcampinagrande.com.br), Campina Grande, Brazil, June 12, 2015
The event brings together engineers and scientists to
discuss the new
challenges and opportunities in CFD modelling. The venue is
located at the
northeast of Brazil, one of the most vibrating and
developing regions of
South America.
-
Discover Better Designs, Faster
Workshop, Long Beach Marriott, Long Beach, United States, June 11, 2015
Imagine achieving better product designs, faster and with
less testing or doing a lot of manual work. That kind of
workflow process and capability is here now. To
experience this for yourself, we are pleased to invite
you to a complimentary workshop that will show you how
easy design exploration can be.
-
New Methods for Simulating Flow-Induced Noise and Vibration
Workshop, Detroit Marriott Livonia, Livonia, United States, June 11, 2015
Attendees will discover the benefits of using simulation
software to model noise and vibration.
Technological advances in simulation software have opened
up new opportunities for accurate modeling of flow-
induced noise and vibration across a broad frequency
range. Additionally, new methods have been implemented
that can be used to model vibroacoustic phenomena more
efficiently. This seminar provides an overview of
recently implemented
methods and discusses various applications.
-
Discover Better Designs, Faster
Workshop, Hampton Inn Boston/Natick, Natick, United States, June 9, 2015
Whether you are new to any field of engineering
simulation or experienced in computer-aided design, this
session will bring helpful insight into how simulation
adds more value to your projects.
This event will show attendees how to achieve the
fundamental step into design exploration, i.e. directly
linking CAD with CAE simulation.
-
Simulation Best Practices and Trends for Advanced Heat Transfer in Electronics
Workshop, G Hotel, Georgetown, Malaysia, June 5, 2015
Thermal simulation specialists will present best
practices for accurate and efficient heat transfer
simulations applied to electronics. Both natural and
forced convection will be addressed. Advanced physics
including radiation and phase change will also be
presented. Finally, the trends for detailed 3D geometry
and wider range of physics observed in electronics
applications will be discussed.
-
Applied LES, DES and URANS for Industry
Course, Chalmers University of Technology, Gothenburg, Sweden, June 3, 2015
A three-day course in "Applied LES, DES and URANS for
Industry" will be given at
Chalmers, Gothenburg, Sweden, between 3-5 June 2015.The
course will cover
three important applications of CFD techniques in industry:
prediction using
unsteady CFD simulations (LES, DES, PANS, URANS), CFD for
flow control and
aerodynamic shape optimization. We believe that the course
is useful for
engineers and researcher in all industrial sectors where
unsteady flows are of
importance.
-
Webinar: Optimising Product Design using ANSYS CFD
Online Event, June 3, 2015
Join our webinar on Wednesday June 3rd as we show how
ANSYS CFD optimisation tools have been used at Forum
Energy Technologies, Northvale Korting and other
companies to design superior products.
-
15th FLOW-3D European Users Conference
User Conference, Hotel Westminster, Nice, France, June 2, 2015
The 15th FLOW-3D European Users Conference will be held June
2-3, 2015 at the Hotel Westminster in Nice, France. A
half-day of FlowSight training will be offered the
afternoon of June 1 at the conference hotel. We invite all
FLOW-3D and FLOW-3D Cast users and those interested in
learning more about our software products to join us for a
stimulating CFD conference in the heart of the French
Riviera.
-
ERCOFTAC - Design Op: Methods & Apps
Course, FOI, Stockholm, Sweden, May 28, 2015
Aims
The course will provide:
-An overview of modern design optimization methods
-Comprehensive discussions on the presented methods
including their pros and cons, assisting industrial
engineers to select the best-suited approach for solving
their particular problems.
-Based on the latter topic, successfully treated examples in
the areas of aeronautics, the automotive, and the
turbo-machinery industry will be presented and thoroughly
-
DLES10: Ercoftac Workshop on Direct and Large-Eddy Simulation
Workshop, Limassol, Limassol, Cyprus, May 27, 2015
The bi-annual Workshop series on Direct and Large Eddy
Simulation (DLES) focuses on modern techniques to simulate
turbulent
flows based on the partial or full resolution of the
instantaneous turbulent flow structure. LES & DNS techniques
gain more and more interest over the years and will
undoubtedly be further enhanced and applied. Recent
developments on hybrid
modelling based on LES/RANS approaches also fall into this
category and are also covered.
-
Training course on HOS non-linear wave models
Course, 1, rue de la Noe, Nantes, France, May 26, 2015
Following the open-source release of non-linear wave models
based on High-Order Spectral (HOS) method developed at Ecole
Centrale Nantes, LHEEA Lab. (CNRS), a training course is now
planned.
-
Webinar: Integrate 1D & 3D Fluid Simulation with Flownex and ANSYS for Complete Systems Analysis.
Online Event, May 22, 2015
Join our webinar on Friday 22nd May to find out how to
model your thermal and fluid flow designs more completely
and efficiently by coupling 3D ANSYS FEA & CFD to a 1D
Flownex systems model.
-
ERCOFTAC -Transition Modelling, 21-22 May 2015, GE,Munich, Germany
Course, GE, Munich, Germany, May 21, 2015
With the general increase of the use and importance of CFD
methods and the increased wish for highly accurate
simulations, the need has grown for the availability of
reliable transition prediction methods.
Aims:
Overview of transition modelling approaches,
Discussion of transition mechanisms,
Detailed discussion of approaches, dependent on the
application area,
Recommendation for appropriate and effective application
of transition modelling
approaches
-
Analysis-Led Design in Subsea Engineering
Online Event, May 21, 2015
This online event will illustrate the effectiveness of
analysis-led design methods in the up-front engineering
phase. Presenters will discuss the use of sophisticated
modeling and simulation techniques for the verification
of design concepts. Dr. Marotta of GE OIl & Gas to speak.
-
Discover Better Designs, Faster
Workshop, Courtyard Houston I-10 West/Energy Corridor, Houston, United States, May 21, 2015
Imagine achieving better product designs, faster and with
less testing or doing a lot of manual work. That kind of
workflow process is here, now. To experience this for
yourself, we are pleased to invite you to a complimentary
workshop that will show you how easy design exploration
can be.
-
Webinar: Integrate 1D & 3D Fluid Simulation with Flownex and ANSYS for Complete Systems Analysis.
Online Event, May 21, 2015
Join our webinar on Thursday 21st May to find out how to
model your thermal and fluid flow designs more completely
and efficiently by coupling 3D ANSYS FEA & CFD to a 1D
Flownex systems model.
-
How do you address Mixing and Scale-up problems? -Live Webinar
Online Event, May 20, 2015
This webinar is about understanding various issues in the
chemical- fluid stirred tank mixing space.
-
Discover Better Designs, Faster
Workshop, Marriott Tulsa Hotel Southern Hills, Tulsa, Canada, May 19, 2015
Imagine achieving better product designs, faster and with
less testing or doing a lot of manual work. That kind of
workflow process is here, now. To experience this for
yourself, we are pleased to invite you to a complimentary
workshop that will show you how easy design exploration
can be.
-
The Eighth International Conference on Thermal Engineering Theory and Applications - ICTEA2015
Conference, Amman, Jordan, May 18, 2015
The conference main objective is to bring together
researchers engaged in the application of experimental,
analytical, or theoretical thermal and energy engineering.
The suggested topics link between conventional and emerging
research areas in thermal energy.
-
27th International Conference on Parallel CFD
Conference, Montreal, Canada, May 17, 2015
ParCFD is the annual international conference devoted to the
discussion of
recent developments and applications of parallel computing
in the field of CFD and related disciplines. A Special Issue of the
International Journal of Computational Fluid Dynamics will collect the best
papers of the ParCFD2015.
Informal queries can be directed to: parcfd2015@cfdlab.mcgill.ca
-
FSAE Michigan 2015 - STAR-CCM+ Workshop
Workshop, Holiday Inn Jackson NW, Jackson, United States, May 17, 2015
This is a chance to learn about our FSAE sponsorship
package (free training, support, and licensing) and our
easy to use, state of the art multidisciplinary
simulation software called STAR-CCM+. During this
workshop, we will show how the software can be used to
enhance the performance of your car in the areas of
aerodynamics, vehicle thermal management and powertrain.
-
Simulation for Marine Applications
Workshop, Courtyard Seattle Bellevue/Redmond, Bellevue, United States, May 14, 2015
This event will highlight the latest innovations and
benefits of computational fluid dynamics in the marine
industry, plus cost-effective alternatives to physical
testing and empirical methods.
-
Simulation for Marine Applications
Workshop, Courtyard Palm Beach/Jupiter, Jupiter, United States, May 12, 2015
This event will highlight the latest innovations and
benefits of computational fluid dynamics in the marine
industry, plus cost-effective alternatives to physical
testing and empirical methods.
-
A five day Short Term Training Program on CONTEMPORARY APPROACHES OF APPLIED MATHEMATICS IN SCIENCE AND ENGINEERING
Workshop, National Institute of Technology, Warangal, Kazipet, India, May 11, 2015
The scope of the program is to include the contemporary
theoretical development of numerical methods, applied
modelling issues from a problem-orientated perspective,
scientific computing technologies and any interdisciplinary
combination that is not yet standard in the field. The STTP
will address all-level researchers and is aimed to help
shaping future research directions and creating
opportunities for new interdisciplinary collaborations.
-
Numerical sea trials for Merchant Vessels
Online Event, May 6, 2015
Join NUMECA for a free webinar on FINE/Marine
-
Measuring the Value and Cost of Data Analysis
Online Event, April 30, 2015
This webinar will focus on how to create effective data
analyses before, during and after your simulation runs
for all applications. We will review the utility of our
Derived Parts and how they are used in quantitative
reporting and plotting. We will also cover the effective
use of color and lighting to generate high impact,
effective scientific visualizations.
-
Webinar: Interpreting Moldflow Results - Get the Most Out of Your Injection Moulding Simulations
Online Event, April 30, 2015
Join our webinar on Thursday 30th April to learn how to
improve your injection moulding simulations and build
confidence in your analysis results using Autodesk
Moldflow.
-
Designing Better Medical Devices... Faster
Workshop, Houston Marriott Energy Corridor, Houston, United States, April 30, 2015
Please join us for a complimentary workshop on how
Computational Fluid Dynamics (CFD) and modeling of Fluid
Structure Interaction (FSI) will aid you in the design
and optimization of your medical devices.
-
Webinar: Practical Structural & Thermal Management of Electronic & Electro-Mechanical Products with ANSYS Multiphysics Solution
Online Event, April 29, 2015
Understanding the thermal behaviour and associated
structural response of a component is crucial to the
design of an electronics product. From initial concept
through to manufacturing, ANSYSsimulation plays its part
in helping engineers eliminate under-performing
proposals, while also providing non-invasive methods for
performance assessments of potential designs.
Join us on Wednesday 29th April 2015, as we showcase
ANSYS' multiphysics capabilities, relevant to electronics
design.
-
Understanding How Fluid-Structure Interaction (FSI) Simulation Can Work for You
Workshop, Residence Inn Chicago Oak Brook, Oak Brook, United States, April 29, 2015
With presentations from CD-adapco, Kimberly-Clark and
Dassault Systemes SIMULIA, this workshop will detail how
customers benefit from seamless, easy-to-use, and robust
fluid-structure interaction solutions using STAR-CCM+, as
well as how you can link leading Finite Element Analysis
(FEA) tools such as Abaqus by SIMULIA.
-
Lunch and Learn: CFD Simulation for the Building Environment
Workshop, Courtyard Nashville Downtown, Nashville, United States, April 29, 2015
This event will demonstrate how companies like Atkins,
Atelier 10, Gruner, IES, M/E Engineering, and Arup use
simulation to create energy efficient designs. There is
also a hands-on session to solve an HVAC problem. Put
your engineering skills to the test and create a better
design than your neighbor! No previous training required.
-
Designing Better Medical Devices... Faster
Workshop, SpringHill Suites Tampa Westshore Airport, Tampa, United States, April 28, 2015
Please join us for a complimentary workshop on how
Computational Fluid Dynamics (CFD) and modeling of Fluid
Structure Interaction (FSI) will aid you in the design
and optimization of your medical devices.
-
Workshop for Multi-Disciplinary and Multi-Objective Design Optimisation
Workshop, The Venture Centre, Sir William Lyons Rd, COVENTRY, United Kingdom, April 23, 2015
Understand how worthwhile it is to implement design
optimisation to overcome the increasing market
challenges. modeFRONTIER is used in various engineering
disciplines and for numerous applications, supporting
designers and engineers, operating in all industrial
sectors, to identify the best design solutions.
-
OpenFOAM: Two-Day Advanced course - Melbourne - April 2015
Course, 72 Boyd Street, Dandenong North, Australia, April 23, 2015
This is a two-day hands-on course in Melbourne where
participants will learn to customise top
level solvers in OpenFOAM. In addition, introduction to C++
programming language, creation of the new turbulence model as
a part of the existing OpenFOAM library with curvature
correction.
-
Pointwise Training - 3 day course
Course, Pointwise, Inc., Fort Worth, United States, April 21, 2015
Join us on 21-23 April 2015 for training on Pointwise that
will equip you to quickly generate high-quality structured,
unstructured, and hybrid grids.
-
The Engineering Simulation Show 2015 - www.theengineeringsimulationshow.co.uk
Conference, Derby Roundhouse, Derby DE24 8JE, Derby, United Kingdom, April 15, 2015
The Engineering Simulation Show 2015 brings together the
foremost products and services
within the engineering simulation field with senior decision
makers and users from across
the global engineering industry.
The Show is to be held at the iconic Derby Roundhouse at the
centre of the UK's
engineering heritage.
This Show delivers an innovative and vibrant experience
aimed at attracting the
professional engineering community across the full range of
industrial sectors.
Entry is free.
-
Simulation of Accurate and Efficient Heat Transfer
Workshop, Fairfield Inn & Suites Montreal Airport, Montreal, Canada, April 15, 2015
This seminar will present the most up-to-date 3D analysis
and efficient heat transfer methods available for
mechanical and electronic system design, including
components and assemblies.
-
WORKSHOP: Addressing Scale Up Challenges in the Pharma, Biotech and Chemical Process Industries
Workshop, Wilton Centre, Cleveland, United Kingdom, April 14, 2015
Please join us for this workshop as we explore the
benefits of applying CFD in the chemical process,
pharmaceutical and biotech industries.
-
Reducing Costs Due to Erosion/Corrosion Using CFD Simulation
Workshop, Houston Marriott Energy Corridor, Houston, United States, April 9, 2015
This workshop will feature presentations from Wild Well
Control’s Advanced Engineering Group, as well as CD-
adapco's Dr. Oleh Baran and Dr. Chris Lueth. The seminar
will also feature live demonstrations of STAR-CCM+, so
attendees will be able to try for themselves during the
hands-on session.
-
SCALING UP: Addressing Scale Up Challenges in the Pharma, Biotech and Chemical Process Industries
Workshop, Courtyard Boston Cambridge, Cambridge, United States, April 8, 2015
Computational fluid dynamics (CFD) and particle modeling
with Discrete Element Method (DEM) have been identified
as key enabling technologies in finding solutions to many
of the challenges that surround scale-up; capable of
reducing operating costs across manufacturing and quality
divisions.
Please join us for this workshop as we explore the
benefits of applying CFD in the chemical process,
pharmaceutical and biotech industries.
-
3-Day Course in the Direct Simulation Monte Carlo (DSMC) Method
Course, University of Strathclyde, Glasgow, United Kingdom, April 1, 2015
Highly dilute gas conditions are encountered in a wide
variety of technological applications including
hypersonic spacecraft design, MEMS, planetary and
astrophysics problems and manufacturing processes in
near-vacuum environments. The dominant numerical
technique for such rarefied gas flows is the direct
simulation Monte Carlo (DSMC) method.
-
Engineering Workshop: Discover Better Designs... Faster
Workshop, Courtyard Indianapolis Castleton, Indianapolis, United States, March 26, 2015
This event will show attendees the benefits of taking CAD
directly into CAE simulation without laborious, manual
CAD repair. This assures a faster automated route from
CAD to simulation solution.
-
Webinar Tutorial: Faster Exploration and Analysis of Parametric CFD Results with Tecplot Chorus 2015
Online Event, March 26, 2015
This webinar tutorial will show you how to quickly analyze
amulti-dimensional design space of parametric CFD results
-
Workshop HPC enabling of OpenFOAM for CFD applications
Workshop, Cineca - BOLOGNA via Magnanelli 6/3, Casalecchio di Reno (BO) , Italy, March 25, 2015
A workshop covering advanced information on
OpenFoam for CFD in HPC environment.
-
Advances in Numerical Modelling of Hydrodynamics
Workshop, Kroto Research Institute, North Campus, University of Sheffield, Sheffield, United Kingdom, March 24, 2015
Short workshop on issues related to computational
hydrodynamics and, in particular to theoretical development
of numerical methods, applied modelling issues from a
problem-orientated perspective, scientific computing
technologies and any interdisciplinary combination that is
not yet standard in the field of computational
hydrodynamics.
-
Engineering Workshop: Discover Better Designs... Faster
Workshop, Marriott St. Louis Airport, St. Louis, United States, March 24, 2015
This event will show attendees the benefits of taking CAD
directly into CAE simulation without laborious, manual
CAD repair. This assures a faster automated route from
CAD to simulation solution.
-
Intuitive Geometrievorbereitung mit ANSYS SpaceClaim schnell & einfach
Online Event, March 24, 2015
Erfahren Sie bei dem Webinar am 24.03, wie Sie Geometrien
aus allen gaengigen CAD-Systemen schnell und einfach fuer
die Simulation vorbereiten und veraendern koennen und
dadurch extrem Zeit bei der Geometrievorbereitung
einsparen. Der neue Release, ANSYS SpaceClaim Direct
Modeller R16, erlaubt es Ihnen 3D Modelle zu erstellen,
zu editerien und zu reparieren ohne gross ueber die
Technik
nachdenken zu muessen.
-
AcuSolve Info Day at Munich
User Conference, Edisonstrasse 3, Unterschleissheim, Germany, March 24, 2015
This serves as a platform to get an overview of Altair's
CFD Solutions and to interact with experts.
Attendees would be offered a test license and free
training to try out the software.
-
Efficient CFD solutions for centrifugal pumps
Online Event, March 23, 2015
Join NUMECA for a FREE webinar on March 18
-
Applied LES, DES and URANS for Industry
Course, Chalmers University of Technology, Gothenburg, Sweden, March 18, 2015
This course is about unsteady CFD techniques such as LES,
DES, PANS and
URANS applied in industrial applications. We believe that
the course is useful for
engineers and researcher in all industrial sectors and
research where unsteady
flows are of importance.
-
Efficient CFD solutions for centrifugal pumps
Online Event, March 18, 2015
Join NUMECA for a FREE webinar on March 18
-
AcuSolve Info Day at Munich
User Conference, Edisonstrasse 3, Unterschleissheim, Germany, March 18, 2015
This serves as a platform to get an overview of Altair's
CFD Solutions and to interact with experts.
Attendees would be offered a test license and free
training to try out the software.
-
AcuSolve Info Day at Cologne
User Conference, Eupener Str 129, 6. OG , Cologne, Germany, March 18, 2015
This serves as a platform to get an overview of Altair's
CFD Solutions and to interact with experts.
Attendees would be offered a test license and free
training to try out the software.
-
AcuSolve Info Day
User Conference, Calwer Str 7, Boeblingen, Germany, March 17, 2015
This serves as a platform to get an overview of Altair's
CFD Solutions and to interact with experts.
Attendees would be offered a test license and free
training to try out the software.
-
CFDEM®project (LIGGGHTS® & CFDEM®coupling) user meeting and workshop
Conference, Linz, Austria, March 14, 2015
2 day event in Linz / Austria: User group meeting and
conference for LIGGGHTS® & CFDEM®coupling open source DEM
and CFD-DEM software
-
Fluid Dynamics Seminar
Seminar, John F. Kennedylaan 2 , Eindhoven, Netherlands, March 12, 2015
Join this free seminar to explore the modeling of fluid
dynamics and other multiphysics applications involving
fluid flow.
-
Webinar: ANSYS CFD R16 - Learn About New Features and Updates in the Latest Release
Online Event, March 12, 2015
A 30-minute webinar highlighting 10 of the great new new
features and updates in Release 16 of ANSYS CFD. These
features have been hand-picked by our engineering team to
address the most common needs of the CFD community for
both new and experienced users.
-
ERCOFTAC - Oil, Gas and Petroleum: BPG & Technology Trends
Seminar, Stieltsjesweg 1, NL 2628, CK Delft, Delft, Netherlands, March 9, 2015
The aim is to harness the FTAC processes and
present a 2 day seminar with a main focus on BPG and
Technology Trends CFD and CFD-FEA. The seminar will capture
the industrial, and the academic view. The talks express the
challenges, current and prospective solutions, as faced by
the oil companies, the solution providers, the commercial
CFD houses, and academia, in the production and
transportation of hydrocarbon fuels in an efficient and
reliable manner, under a health and safety framework.
|
