-
Optimize This! 2017 International HEEDS Conference
Conference, Holiday Inn Munich City Centre, Munich, Germany, June 19, 2017
Optimize This! 2017 will bring individuals responsible
for product development together to learn and share how
HEEDS is being used in a wide variety of industries and
applications to help discover better designs, faster!
-
One Month course on Advanced CFD analysis from 15-June-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, June 15, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Large-Eddy Simulation & Detached-Eddy Simulations How to use an in-House Fortran source code
Course, Gothenburg, Sweden, June 14, 2017
During the course, the participants will learn and work with
an in-house LES/DES code called CALC-LES, written by the
lecturer.
-
[Live Online Training] - Introduction to CFD Analysis for Chemical Process Engineers
Online Event, June 14, 2017
Stirred Tank Reactor | Static Mixer | Jet Mixing In Large
Waste Water Tank | Polymer Trap And Separators
-
AxCYCLE Workshop Online Course
Course, United States, June 6, 2017
This online training workshop provides participants with
an understanding of the design, analysis and optimization
of thermodynamic cycles using AxCYCLE ™.
-
Fluid Structure Interaction with Impact on Industrial Application, II, 6-7, June 2017, IMFT, France
Course, IMFT, Toulouse, France, June 6, 2017
A principal goal is to enable researchers in the FSI
community with state-of-the-art methods for analysing these
fluid-structure interaction phenomena and to come up with
quality achievements and best practice guidelines for
efficient and secure design. The domains of applications
cover a large spectrum including flow/ movement induced
vibrations and flutter phenomena arising in the domains of
aeronautics, hydrodynamics and energy.
-
Driving Manufacturing Innovation with Digital Design and Simulation
Workshop, 1415 N Cherry Ave, Chicago, United States, June 6, 2017
CIMdata’s Driving Manufacturing Innovation with Digital
Design &
Simulation:Challenges, Strategies & Best Practices for
Business
Success workshop, is the must-attend event for industrial
organizations
and product development solution providers interested in
learning
about “model-driven engineering” strategies and solutions
that will
enable ongoing product and manufacturing innovation to create
competitive advantage, minimize total lifecycle costs, and
drive top line
revenue growth
-
17th FLOW-3D European Users Conference
User Conference, Avenida Palace Hotel, Barcelona, Spain, June 5, 2017
The 17th FLOW-3D European Users Conference will be held at
the Avenida Palace Hotel, June 5-7, 2017 in Barcelona,
Spain. Flow Science's annual Users Conference is an exciting
event
where users advance their simulation skills through
interactions with Flow Science staff engineers,
collaboration with other users, exploring new modeling
approaches, and learning about the latest software
developments. Join the community of FLOW-3D users from all
over Europe for this annual event.
-
ERCOFTAC - Design Optimization AREA, Trieste, Italy, 5-7 June 2017
Course, AREA, Trieste, Italy, June 5, 2017
Aims
The course will provide:
• An overview of modern design optimization methods
• Comprehensive discussions on the presented methods
including their pros and cons, assisting industrial
engineers to select the best-suited approach for solving
their particular problems.
• Based on the latter topic, successfully treated examples
in the areas of aeronautics, the automotive, and the
turbo-machinery industry will be presented and thorough
-
1st AIAA Geometry and Mesh Generation Workshop
Workshop, Sheraton Denver Downtown Hotel, Denver, United States, June 3, 2017
The goals of GMGW-1 are to assess the current state-of-
the-art in geometry preprocessing and mesh generation
technology and software as applied to aircraft and
spacecraft systems of interest to AIAA's membership.
Also, the workshop will help identify and develop
understanding of areas of needed improvement
(performance, accuracy, applicability) in geometry
processing and mesh generation software.
-
One Month course on Advanced CFD analysis from 01-June-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, June 1, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Web Seminar: System Level Simulation in Excel: Is It Possible?
Online Event, May 30, 2017
FloMASTER V8’s integration with Microsoft Excel allows you
to perform system level simulations in a controlled and
familiar environment. Sign up for this presentation to see how.
-
ERCOFTAC Workshop Direct and Large Eddy Simulation 11
Workshop, Polo Didattico Piagge - Via Giacomo Matteotti, 11, Pisa, Italy, May 29, 2017
The bi-annual Workshop series on Direct and Large Eddy
Simulation (DLES) which
started in 1994 focuses on modern techniques to simulate
turbulent flows based
on the partial or full resolution of the instantaneous
turbulent flow structure.
Techniques of hybrid modelling based on a combination of LES
and RANS
approaches also fall into this category and are covered as well.
-
Project Based Summer School and Software Training Program on Computational Fluid Dynamics (CFD)
Course, Department of Mechanical Engineering, Visvesvaraya National Ins, NAGPUR, India, May 26, 2017
It is the summer school in CFD.
-
XXXVI International School of Hydraulics
Conference, Hotel Windsor Palace, Jachranka 75, Jachranka, Poland, May 23, 2017
ISH is an international conference intended to provide a
forum for scientists and engineers working in the field
of broadly understood hydraulics.
-
Advanced CONVERGE Training
Course, 6400 Enterprise Lane, Madison, United States, May 23, 2017
Training courses are free of charge and space is limited so
register soon.
PREREQUISITE: Introductory CONVERGE training or equivalent
basic knowledge
of CONVERGE. The advanced training courses are not
recommended for new
users.
-
Webinar || Automated Optimization Workflow for a Diesel Piston Bowl Using CAESES and CONVERGE CFD
Online Event, May 23, 2017
Diesel engines are commonplace across the industry due to
their economic and reliability advantages. Optimization of the piston bowl
geometry as well as the injection strategy can be very effective in reducing Nix
and soot emissions. This webinar will show how an automated workflow can be
established with CAESES and CONVERGE CFD for optimization.
-
ERCOFTAC- Hybrid RANS-LES Methods for Ind Apps, 22-23 May 2017, U. Manchester, UK
Course, Univ. of Manchester, Manchester, United Kingdom, May 22, 2017
The aims are:
An overview of turbulence modelling.
A firm foundation in the theory and ideas underlying, RANS,
LES and Hybrid RANS-LES techniques.
Recommendation and guidance for the appropriate and
effective application of Hybrid RANS-LES.
Examples from real-world engineering simulations, using the
DES class of models.
-
International Conference on Marine Science Research and Technology
Conference, Kuala lumpur, Malaysia, Kuala Lumpur, Malaysia, May 22, 2017
"Marine Science Research and Technology Conference"
(Marine science - 2017) hosted and organized by Clyto
Access in Malaysia from 22-23 May, 2017 providing an
international forum for the exchange of information in a
wide arena of branches like Marine biology, interactions
between organisms and functioning of marine biosphere,
aquatic ecosystems, microscopic phytoplankton,
oceanography, ecology, botany, etc.
-
Work shop on Computational Fluid Dynamics
Workshop, Anjalai Ammal Mahalingam Engineering College, Thiruvarur, India, May 22, 2017
This work shop will provide core knowledge on:
• Introduction to FEM, weighted residual methods,
FEM formulation, two dimensional structural and thermal
problems.
• The fundamentals of CFD for engineers, and an
introduction to the methods and analysis techniques used
in CFD.
• The use of commercial CFD codes to analyze
internal and external flow heat transfer, multiphase and
combustion problems of practical engineering interest.
-
ESI OpenFOAM Advanced Course
Course, 12555 High Bluff Drive, Suite 175, San Diego, United States, May 18, 2017
This course covers advanced topics of OpenFOAM and is designed to enable the
participants to use OpenFOAM effectively on real engineering problems and develop
the toolbox to suit their needs. It covers general use and programming of OpenFOAM,
building on topics presented earlier in the Foundation Course. It provides a
foundation for all aspects of OpenFOAM, from running cases to programming, so is
useful to both new users and existing users wishing to broaden their knowledge of
OpenFOAM.
-
Webinar: Advanced Metal Casting Simulation
Online Event, May 18, 2017
Metal casting simulations are among the most challenging of
CFD simulations due to the extreme complexity of flow and
physics that occur during fill, solidification and cooling
stages of any casting process. This technical webinar will
present a broad review of FLOW-3D Cast's modeling
capabilities, including detailed examples taken from many
casting applications: LPDC, full HPDC cycles, centrifugal
casting, lost foam, sand casting, continuous casting, tilt
pour, and gravity pour in permanent molds.
-
[Live Webinar] - Increase Solids Processes’ Performance Using Smart Computational Modeling
Online Event, May 18, 2017
Solids Handling | Fluid- Solid Interactions | Mixing Of
Solids | Solids Coating | Solids Drying
-
Web Seminar: Waste Heat Recovery Simulation with Organic Rankine Cycle System Modeling
Online Event, May 18, 2017
Examining vehicle waste heat recovery by simulating an
Organic Rankine Cycle system model in thermo-fluid
1D-computational fluid dynamics (CFD) software FloMASTER.
-
Engineering Simulation Expo
Conference, DUKE ENERGY CONVENTION CENTER, CINCINNATI, United Kingdom, May 17, 2017
The Engineering Simulation Expo 2017 is the trade show
dedicated to the world of simulation technology, hardware
and software. It brings world-leading products and
services within the Simulation and Modeling field
together with an audience of Simulation, FEA, Design,
Stress, CFD and Structural engineers. Please click here
to download our information brochure.
-
Energy & Process CFD Symposium
Conference, Wyndham Houston West Energy Corridor, Houston, United States, May 17, 2017
Join us for this free two-day event where Siemens PLM
customers, partners, and experts will showcase their
industry-leading work in CFD-based engineering simulation
and design-space exploration across the full range of
energy, oil and gas and process industries.
-
ESI OpenFOAM Foundation Course
Course, 12555 High Bluff Drive, Suite 175, San Diego, United States, May 16, 2017
This course introduces the open source CFD toolbox,
OpenFOAM. It provides a foundation for all aspects of
OpenFOAM, from running cases to programming, so is useful
to both new users and existing users wishing to broaden
their basic knowledge of OpenFOAM.
-
[Live Webinar] - Accelerate Your Scale-up And Tech Transfers With MixIT
Online Event, May 16, 2017
Case Studies Will Be Demonstrated Involving Processes Like
Liquid Mixing, Solids Suspension And Gas-dispersion
-
One Month course on Advanced CFD analysis from 15-May-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, May 15, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Sunday batch of course on Advanced CFD analysis from 14-May-2017
Course, Niharika Institute of Computational Engineering, HAL 3rd stage,, Bangalore, India, May 14, 2017
Classes by Mr.Rudresh Ganganna,Former Scientist-ISRO.
Theory +live problems using Ansys Fluent,CFX and ICEMCFD
Hexa.
-
ESI OpenFOAM Advanced Course
Course, 350 Sparks Street, Suite 220, Ottawa, Canada, May 11, 2017
This course covers advanced topics of OpenFOAM and is
designed to enable the participants to use OpenFOAM effectively on
real engineering problems and develop the toolbox to suit their
needs. It covers general use and programming of OpenFOAM, building
on topics presented earlier in the Foundation Course. It provides a
foundation for all aspects of OpenFOAM, from running cases to programming, so
is useful to both new users and existing users wishing to broaden their
knowledge of OpenFOAM.
-
AxCYCLE Workshop Online Course
Course, United States, May 9, 2017
This online training workshop provides participants with
an understanding of the design, analysis and optimization
of thermodynamic cycles using AxCYCLE ™.
-
ESI OpenFOAM Foundation Course
Course, 350 Sparks Street Suite 220, Ottawa, Canada, May 9, 2017
This course introduces the open source CFD toolbox,
OpenFOAM. It provides a foundation for all aspects of
OpenFOAM, from running cases to programming, so is useful
to both new users and existing users wishing to broaden
their basic knowledge of OpenFOAM.
-
15th INTERNATIONAL ICING COURSE
Course, 410 Sherbrooke Street West, Montreal, Canada, May 8, 2017
This course illustrates the state-of-the-art of CFD
applications in
icing
simulations and links theory to application. It is
structured to be of
equal
interest to aerodynamicists, icing, environmental systems
and flight
simulation engineers, regulators and Designated Engineering
Representatives.
-
Internal Combustion Engine Modeling in CONVERGE
Course, 21500 Haggerty Rd., Detroit, United States, May 3, 2017
This two-day course offers an introduction to CONVERGE for
internal
combustion (IC) engine modeling. You will learn about the
CONVERGE solver
and modeling options while working through a typical IC
engine case from start
to finish. Because CONVERGE has a completely automated
meshing process,
you do not need to spend any time preparing the volume mesh,
which simplifies
the case setup process.
-
One Month course on Advanced CFD analysis from 01-May-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, May 1, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Web Seminar: Fans 101
Online Event, April 27, 2017
Fans are common in many electronics cooling applications
though it may not be well understood why a particular fan
type might be better in a particular design. In this
presentation we will discuss how experimental fan
measurement is obtained and integrated into a CFD model.
-
The Engineering Simulation Show 2017
Conference, Roundhouse, Derby, United Kingdom, April 26, 2017
The Engineering Simulation Show 2017 brings together the
foremost products and from across the global engineering
industry.
-
SOWE 2017 - The Fifth Symposium on OpenFOAM in Wind Energy
Conference, ADItech Headquarters, Pamplona, Spain, April 26, 2017
The Fifth Symposium on OpenFOAM® in Wind Energy (SOWE 2017)
is hosted by the Department of Wind Energy at CENER
(National Renewable Energy Centre of Spain). As in the
previous editions, the symposium offers a space to share the
latest developments based on OpenFOAM® for Wind Energy
applications. The symposium brings together experts,
beginners, developers and final end users to discuss the
research results and techniques to solve the new demands of
the Wind Energy sector.
-
Online Training Program on Computational Fluid Dynamics (CFD) with OpenFOAM
Course, Department of Mechanical Engineering, Visvesvaraya National Ins, NAGPUR, India, April 24, 2017
This training gives the platform to the participant to
understand OpenFOAM for basic to advanced to programming
level.
-
VKI Lecture Series: Turbulent Combustion
Conference, Waterloosesteenweg 72, 1640 Sint-Genesius-Rode, Belgium, April 24, 2017
The objective of this biannual Lecture Series on Turbulent
Combustion is to present the state-of-the-art review of
on-going activities in turbulent combustion and to outline
current research directions.
-
Mixing In Stirred Tanks - A One Day Live Training Course - Frankfurt, Germany, April 20, 2017 - Attendees- MixIT Licence Free
Course, New Horizons, Frankfurt, Germany, April 20, 2017
This course is designed for chemists and chemical
engineers to learn or review mixing calculations and
scale up methods. Subsequently, this will provide an
opportunity for immediate practical application.
-
Simulation Based Characterization: A 3D to 1D System Level Thermo-Fluid CFD Workflow
Online Event, April 20, 2017
Learn how FloEFD can be used to characterise complex
multi-arm geometries for use in FloMASTER thermos-fluids
simulations.
-
One Month course on Advanced CFD analysis from 15-April-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 15, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Rotor Dynamics and Bearing Design Online Course
Course, United States, April 11, 2017
This course provides education by covering everything
from basic definitions and the role of rotor dynamics in
machines to lateral and torsional analyses as well as
rotor balancing.
-
Using CFD for ship design evaluation and optimization
Online Event, April 11, 2017
This webinar will examine an automated system which
allows CFD simulations to run faster. It's also used in
performing hull form optimization where the CFD tool is
coupled with a parametric design tool, allowing for
hundreds of simulations a day to be run on an HPC
cluster, resulting in highly improved hull forms in a
matter of days. Check it out and sign up for this free
online event!
-
Advanced Simulation to Solve and Optimize Process Development Problems
Workshop, Courtyard Boston Cambridge, Cambridge, United States, April 11, 2017
If you are an engineer or a manager who wants to optimize
current processes in ways it was never possible before,
this event will help you understand the applicability of
deploying simulation to achieve these objectives.
If you are already using CFD in your engineering
workflow, this session will demonstrate that it is not a
single point simulation but rather the ability to rapidly
and intelligently explore a host of designs and processes
that bring the most value from simulation.
-
FLOW-3D Workshop for Water & Environmental Flows
Conference, Marriott Anaheim, Anaheim, United States, April 6, 2017
In this CFD workshop that will take place on Thursday, April
6 at the Marriott Anaheim in Anaheim, CA, Flow Science
Senior CFD Engineer, John Wendelbo, will introduce water &
environmental simulation workflows using FLOW-3D.
-
One-week Course on Aerodynamics & Hydrodynamics in Sports (CAHS-2017)
Course, Motilal Nehru National Institute of Technology (MNNIT), Allahabad, India, April 3, 2017
This course is one of its kind in India, which will be
taught by Prof. Firoz Alam of RMIT University, Melbourne
(Australia). Five days of the certificate course includes
classroom teaching followed by Tutorials and discussions.
UG and PG Students, Research scholars, Faculty
members, Practicing Engineers, Scientists, Sports
personnel, Sports trainers and Sports enthusiastic would
be benefited from the course.
-
One Month course on Advanced CFD analysis from 01-April-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, April 1, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Web Seminar: Power Electronics Cooling Calculations at Room Level
Online Event, March 29, 2017
This presentation will demonstrate 3D-CFD flow calculations
with FloEFD for the analysis of a power electronics cabinet
with electrical components.
-
Applications of Advanced Computational Methods in Engineering 28-29th March, 2017
Workshop, Birla Institute of Technology and Science Pilani Pilani Campus, Jhujhunu, Rajsathan, India, March 28, 2017
The Department of Mechanical Engineering, BITS-Pilani,
Pilani Campus, is conducting a two day Workshop on
Applications of Advanced Computational Methods in
Engineering during March 28-29, 2017. The objective of
the workshop is to equip participants with skills
required in advanced computational techniques
particularly in the areas of computational fluid
dynamics, and computational materials science.
-
CFD for Atmospheric Flows and Wind Engineering
Conference, Waterloosesteenweg 72, 1640 Sint-Genesius-Rode, Belgium, March 27, 2017
The present course offers a wide overview of the
state-of-the-art of the domain, considering the application
to both small and mesoscale range. Reynolds Averaging (RANS)
and large-eddy (LES) approaches are discussed and their
respective capabilities for different classes of flows axes
are evaluated. The discussion is completed by the
presentation of examples of practical implementation and
applications using Open Source Codes as well as in-house and
commercial software.
-
Design of a Waste Heat Recovery System 5-Day Training
Course, Boston, United States, March 27, 2017
The objective of this course is to provide participants
theoretical and practical training on designing waste
heat recovery systems for improving energy efficiency in
existing and new energy intensive systems.
-
Distance Learning Course in DSMC.
Course, United Kingdom, March 27, 2017
A Distance Learning Course in the Direct Simulation Monte
Carlo (DSMC) method.
-
Sunday batch of course on Advanced CFD analsysi from 26-March-2017
Course, Niharika Institute of Computational Engineering, HAL 3rd stage,, Bangalore, India, March 26, 2017
Classes by Mr.Rudresh Ganganna,Former Scientist-ISRO.
Theory +live problems using Ansys Fluent,CFX and ICEMCFD Hexa.
-
AxSTREAM NET Online Course
Course, United States, March 21, 2017
The goal of this 4 day online course is to teach attendees
how to successfully use AxSTREAM NET™
-
CFDEM® Training
Course, Industriezeile 35, Linz, Austria, March 20, 2017
Intense hands-on-trainings - if you want to learn how to
fully harness the power of open source DEM and CFD-DEM
simulations, visit our short courses and get crucial
knowlegde directly from our developers!
LIGGGHTS® Open Source DEM Engine
CFDEM®coupling CFD-DEM Engine
CFDEM®Workbench for LIGGGHTS®
-
Computational Science Symposium
Conference, Dept. CDS, IISc, Bangalore, India, March 16, 2017
The central theme of this symposium is on the development of
accurate
numerical schemes for solving differential equations, of
analysis and
robust numerical algorithms including efficient parallel
algorithms for
high performance computing.
More than 20 invited plenary speakers (academia/industry)
and several
contributed talks are planned.
-
OpenFOAM Advanced Course
Course, 25 Burlington Mall Road 2nd Floor, Burlington, United States, March 16, 2017
This course covers advanced topics of OpenFOAM and is
designed to enable the participants
to use OpenFOAM effectively on real engineering problems and
develop the toolbox to suit
their needs. It covers general use and programming of
OpenFOAM, building on topics
presented earlier in the Foundation Course. It provides a
foundation for all aspects of
OpenFOAM, from running cases to programming, so is useful to
both new users and existing
users wishing to broaden their knowledge of OpenFOAM.
-
Improving the Efficiency of Hydro Turbines with 3D CFD
Online Event, March 16, 2017
In this webinar see how 3D computational fluid dynamics
(CFD) simulation technology has been used to accurately
assess the efficiency of a Francis hydro turbine.
Simulation results will be compared to experimental
results for a realistic, full-scale, non-proprietary
hydro turbine model made available as part of the
Francis-99 workshop series hosted by the Norwegian
Hydropower Centre.
-
ERCOFTAC- Oil, Gas and Petroleum: Modelling and Simulation
Seminar, Frazer Nash Consulting, Dorking, United Kingdom, March 15, 2017
Aims - to capture latest modelling and
simulation practices and issues surrounding network
digitisation, in order to understand how best can we serve
the sector with the latest technologies, leading to
operational excellence, where oil prices remain much lower
than their 2014 highs, but in a more stable price plateaux,
that allows producers and solution providers a viable
business environment.More detail to
follow shortly..
-
One Month course on Advanced CFD analysis from 15-March-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 15, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
OpenFOAM Foundation Course
Course, 25 Burlington Mall Road 2nd Floor, Burlington, United States, March 14, 2017
This course introduces the open source CFD toolbox, OpenFOAM.
It provides a foundation for all aspects of OpenFOAM, from
running cases to programming, so is useful to both new users
and existing users wishing to broaden their basic knowledge
of OpenFOAM.
-
AxCYCLE Workshop
Course, Switzerland, March 13, 2017
This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™
-
FloTHERM XT V3.0 - What's New
Online Event, March 9, 2017
Learn the new features providing added benefits to FloTHERM XT.
-
AxSTREAM Workshop - 3 Day Training
Conference, Boston, United States, March 8, 2017
This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
Lattice Boltzmann Methods with OpenLB Software Lab
Conference, Tunisia, March 6, 2017
The spring school introduces scientists and applicants from
industry to the
theory of LBM and trains them on practical problems. The
first three days are
dedicated to the theoretical fundamentals of LBM up to
ongoing research on
selected topics. Followed by two days of mentored training
on case studies using
OpenLB, the participants gain deep inside into LBM and its
applications.
-
Axial Turbine Design 5-Day Training
Course, Bangalore, India, March 6, 2017
The goal of this course is to provide engineers with a
better understanding of steam and gas turbines and help
them find new, more accurate, cost-saving solutions
through successful axial turbine design and operation
tasks.
-
Advanced microfluidic flow modeling using FLOW-3D
Online Event, March 2, 2017
The CFD software FLOW-3D offers a unique blend of both free
surface and internal flow modeling capabilities coupled with
advanced multiphysics features that are particularly well
suited to micro-scale fluid flow applications. This
technical webinar will focus on presenting a broad overview
of FLOW-3D’s modeling capabilities as applied to
microfluidics, and will include an emphasis on particle
sorting applications, including advanced electro, magneto
and acousto-phoresis topics.
-
One Month course on Advanced CFD analysis from 01-March-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, March 1, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
IGBT Cold Plate Optimization
Online Event, March 1, 2017
Discover several ways to optimize an IGBT cold plate in
FloEFD and with additional information on the external
pSeven optimizer platform.
-
FloEFD v.15 - What's New
Online Event, February 23, 2017
See what’s new in FloEFD v16
-
AxCYCLE Workshop
Course, Boston, United States, February 22, 2017
This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™
-
OpenFOAM Stammtisch User Meeting
User Conference, Universität Kassel, Campus Center, Moritzstrasse 18, Kassel, Germany, Germany, February 20, 2017
European users gather to exchange experiences in the use of
OpenFOAM technology.
-
One Month course on Advanced CFD analysis from 15-February-2017 (Morning and Evening batch)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 15, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Sunday batch :Course on Advanced CFD analysis from 12-February-2017 (10:30 Am to 6 PM, 12 Sundays)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 12, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Water Resources: a comprehensive review of FLOW-3D’s modeling capabilities
Online Event, February 9, 2017
Following a series of webinars that have focused on various
aspects of civil infrastructure and environmental flow
modeling, this presentation will offer a comprehensive
review of the modeling options that are currently available
to water resource engineers using the CFD tool FLOW-3D.
-
Designing a 1,000mph car - the use of CFD
Seminar, Oxford e-Research Centre, 7 Keble Road, Oxford, United Kingdom, February 9, 2017
The BLOODHOUND Supersonic Car is set to take the Land Speed
Record into a whole new era. The team plans to take a manned
vehicle to 1000mph by 2018, increasing the current Land
Speed Record (763mph) by over 30%.
This target presents the Bloodhound CFD team with massive
scientific and engineering challenges.
Dr Ben Evans of the University of Swansea will talk
about the aerodynamics of the Bloodhound SSC project and
discuss the extreme challenges of designing a car to
reach 1000mph.
-
AxSTREAM 3 Day Workshop
Course, Boston, United States, February 8, 2017
his training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
AxSTREAM 3 Day Workshop
Course, Zug, Switzerland, February 8, 2017
This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
Radial Compressor Design and Optimization
Course, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, February 6, 2017
The short course provides an overview of the present
knowledge and flow models and intends to provide a good
background for the people interested in the aerodynamic
design of radial compressors.
-
One Month course on Advanced CFD analysis from 01-February-2017 (Morning and Evening batch)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 1, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Rotor Dynamics and Bearing Design
Course, Zug, Switzerland, February 1, 2017
This course covers rotor dynamics analysis and bearings
simulation for different types of rotors and bearings
(journal, gas, rolling elements). Rotor dynamics
fundamentals, basic design rules and analyses according
API and other standards, bearing simulation aspects and
more are explained.understanding of the design, analysis
and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
Webinar: Design of High Efficiency Compressors with Low GWP Refrigerants
Online Event, February 1, 2017
Register to see how the different modules of TURBOdesign
Suite can be used to develop high efficiency compressors
for new refrigerants with low Global Warming Potential
(GWP).
-
FloMASTER v8.0 - Industrial Fluid System Simulation
Online Event, February 1, 2017
The eagerly anticipated Version 8.0 of FloMASTER is now
available and you have the opportunity to see how you can
benefit in your design process in this new live web seminar.
-
Industry oriented course on CFD analysis (Ansys Fluent, Ansys CFX, Ansys ICEMCFD-Hexa).
Online Event, February 1, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Live Webinar - Get to know FieldView 16.1
Online Event, February 1, 2017
Register now for your chance to get to know the new
FieldView 16.1 update in a live webinar with Yves-Marie
Lefebvre, our FieldView Product Chief. Demonstration and
exploration of the features our customers asked for and
how they will help all CFD users be more productive.
-
Live Webinar - Get to know FieldView 16.1
Online Event, January 31, 2017
Register now for your chance to get to know the new
FieldView 16.1 update in a live webinar with Yves-Marie
Lefebvre, our FieldView Product Chief. Demonstration and
exploration of the features our customers asked for and
how they will help all CFD users be more productive.
-
Second CFD Workshop at UTM, Malaysia
Workshop, HiREF Laboratory, Faculty of Mechanical, UTM, Skudai, Malaysia, January 30, 2017
A comprehensive course and workshop on CFD
held at Malaysia's premier university of
technology, UTM
-
AxSTREAM 3 Day Workshop
Course, Boston, United States, January 25, 2017
This training provides participants with a practical
understanding of the design, analysis and optimization of
flow paths for turbomachinery equipment using the
AxSTREAM® software platform.
-
FloTHERM XT: Compressing the Thermal Design Process
Online Event, January 25, 2017
Incorporating FloTHERM XT into your work flow can reduce
your design process time by a factor of at least 2 when
compared to traditional general-purpose simulation products.
A thermal design using the BeagleBone Black board will be
used to demonstrate FloTHERM XT's CAD-centric approach.
-
Flowing Matter 2017
Conference, Faculty of Engineering, University of Porto, Porto, Portugal, January 23, 2017
This conference will serve as an important event to get the
three scientific communities involved in the COST Action
MP1305 closer to each other: complex fluids (suspensions,
granular materials, glasses, rheology), active matter
(biological and
synthetic micro-swimmers, bird flocks, insect swarms), and
complex flows (turbulence, chaotic flows). The ultimate goal
is to
stimulate the interaction between these three scientific
communities working on Flowing Matter.
-
Advanced Methods in Computational Fluid Dynamics
Course, George Begg Building, School of MACE, University of Manchester, Manchester, United Kingdom, January 23, 2017
This four (04) day course will address the analysis of
modern approaches to turbulence modelling, different models
and their applications to the solution of industrial
problems including external and internal aerodynamics, heat
transfer, combustion, aero-acoustics, Lattice Boltzmann
Method, Smooth Particle Hydrodynamics (SPH), waves and tidal
energy extraction modelling. The course also induces two
(02) days of practical training on edf’s open source CFD
solver Code_Saturne.
-
Multi-scale methods for non-reacting and reacting flow simulations
Course, Université Libre de Bruxelles, Solbosch Campus, Bruxelles, Belgium, January 23, 2017
The focus of the school is on bridging scales in modelling
and simulation of
reacting and non-reacting flows.
Programme and school details are available at the website
http://francquichair.wixsite.com/course
-
Introduction to Computational Fluid Dynamics
Conference, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, January 23, 2017
The objective of these lecture series on "Introduction to
CFD" is to provide an elementary tutorial presentation on
computational fluid dynamics (CFD), emphasizing the
fundamentals and surveying a variety of solution techniques
whose applications range from low speed incompressible flow
to hypersonic flow.
-
Axial Turbine Design 5-Day Training
Course, Boston, United States, January 23, 2017
The goal of this course is to provide engineers with a
better understanding of steam and gas turbines and help
them find new, more accurate, cost-saving solutions
through successful axial turbine design and operation
tasks.
-
Sunday batch :Course on Advanced CFD analysis from 22-January-2017 (10:30 Am to 6 PM, 12 Sundays)
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 22, 2017
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
AxCYCLE Workshop
Course, 1500 District Avenue, Burlington, United States, January 18, 2017
This training provides participants with a practical
understanding of the design, analysis and optimization of
thermodynamic cycles using AxCYCLE™.
-
Motorsports Heat Exchanger Optimization
Online Event, January 18, 2017
Join this event to watch how to optimize the design of an F1
sidepod heat exchanger.
|
