-
Open Source CFD International Conference 2009
Conference, World Trade Center (WTC), Barcelona, Spain, November 12, 2009
Following the previous conferences in London and Berlin, CFD
engineers, managers and academia are all invited to the Open
Source CFD International Conference 2009 in Barcelona,
Spain.
-
Simulating and Optimizing Mixing Processes - Free CFD Web Seminar
Online Event, November 11, 2009
Join us for a complimentary 45-minute web seminar, where
the presenter will discuss the challenges vehicle
manufactures face when designing manifolds for engines.
-
Microfluidics and Microheat
Seminar, Philips Applied Technologies, Eindhoven, Netherlands, November 11, 2009
The development of microscale systems has been growing
rapidly, making many engineering applications possible. It
is now commonly accepted that miniaturization associated
to microtechnologies will give birth in the near future to
new objects which will affect industrial practice and our
daily life in any aspects.
There is no end to the field of application, from basic
mixing, to compact heat exchanger, chip cooling in
electronic devices, microreactors, biological systems and
beyond.
-
2009 ESSS South American ANSYS Users Conference
User Conference, Costao do Santinho Resort, Florianopolis, Brazil, November 10, 2009
ESSS and ANSYS, Inc. are pleased to invite you to the 2009
ESSS South American ANSYS Users Conference, a discussion
forum for those interested in ANSYS' Technologies,
especially the ones involved with Structural Analysis (FEA),
Computational Fluid Dynamics (CFD) and Electronic Design
Automation (EDA). The event will take place at Costao do
Santinho Resort, located in the north of Florianopolis,
Brazil, on November 10-13, 2009. The
deadline for abstract submission is July 06.
-
Intensive Course on Axial Turbine Fundamentals and Turbomachinery Design with AxSTREAM
Workshop, Boston, United States, November 9, 2009
The course provides a deep insight into axial turbines and
presents a reliable solution to design and optimize
axial/radial turbomachinery flow path.
-
STAR-Konferenz Deutschland 2009
User Conference, andel's Hotel, Berlin, Germany, November 9, 2009
CD-adapco freut sich die 4. STAR-Konferenz Deutschland
anzukuendigen, welche in diesem Jahr vom 09. bis 10. November
in Berlin stattfinden wird. Unter dem Motto Integrate,
Automate, Innovate dreht sich bei der diesjaehrigen
Konferenz u.a. um die automatisierte
CAE-Analyse, bei der eine Vielzahl von Simulationen mit
minimalem Benutzeraufwand durchgefuehrt werden koennen.
-
Altair HyperWorks Enabled Community Fall Webinar Series
Online Event, November 9, 2009
This complimentary webinar series is an opportunity to take
a deeper look at the ALL of our HyperWorks Enabled Partner
Applications. Each 45-minute webinar will be dedicated to
one application
and will start with a short introduction of the HyperWorks
Enabled Community. To accommodate multiple time zones,
there will be duplicate sessions hosted for each partner
application.
-
Engineering Simulations Solutions for the Oil & Gas Industry
Online Event, October 28, 2009
In order to support the continued expansion of ANSYS
Simulation Products into the Oil and Gas industry, ANSYS is
pleased to announce a series of webinars covering specific
& popular simulation topics.
-
'Simulating and Optimizing Heat Transfer' - Complimentary Web Seminar
Online Event, October 28, 2009
The presenter will discuss the complexities of designing
and integrating cooling into injection molds while still
managing heat and what this means for the overall design of
the finished product.
-
Engineering Simulations Solutions for the Nuclear Industry
Seminar, The Centre, Birchwood Park, Warrington, United Kingdom, October 21, 2009
This seminar will provide an opportunity to learn about
Computer Aided Engineering (CAE) methods for the Nuclear
Energy Industry, with presentations from industry experts,
ANSYS developers and consultants. The aim will be to
demonstrate the "state-of-the-art" in CAE, and how these
tools can readily be used for the detailed simulation of
most aspects of nuclear power plant.
-
Asian Symposium on Computational Heat Transfer and Fluid Flow (ASCHT09)
Conference, Seogwipo KAL Hotel, Jeju, South Korea, October 20, 2009
This conference
aims to provide an international forum for presentation,
exchange of ideas and creation of knowledge in recent
advances on various aspects of theories, analyses, and
applications of computational methods in theoretical and
engineering fluid and thermal science.
-
Best Practice Guidance Seminar - CFD for Dispersed Multi-Phase Flows
Seminar, La Sala Strozzi, Florence, Italy, October 16, 2009
Due to the complex physics involved in multiphase flow the
application of CFD in this area is rather young. These
guidelines give a survey of the different methods being
used for the numerical calculation of turbulent dispersed
multiphase flows. The potential users are
researchers and engineers involved in projects requiring
CFD of (wall-bounded) turbulent dispersed multiphase flows
with bubbles, drops or particles.
-
Best Practice Guidance Seminar - CFD for Dispersed Multi-Phase Flows
Seminar, La Sala Strozzi, Florence, Italy, October 16, 2009
Due to the complex physics involved in multiphase flow the
application of CFD in
this area is rather young. The best practice guidelines
give a survey of the different methods
being used for the numerical calculation of turbulent
dispersed multiphase flows. The BPG book is offered on the
day as part of the delegate pack.
-
Technology Update: High Performance Computing and Engineering Analysis
Seminar, Doubletree by Hilton, Aberdeen, United Kingdom, October 15, 2009
ANSYS invites you to attend a FREE Technology Update
Seminar at the Doubletree by Hilton, Aberdeen. This seminar
will provide you with an opportunity to learn about
developments in High Performance Computing and Grid
Computing with presentations from experts in the field,
ANSYS developers and consultants.
-
Simulating and Optimizing Pressure Drop
Online Event, October 14, 2009
Join Mentor Graphics for the second in a series of
Engineering Fluid Dynamic Web Seminars.
In this session, Simulating and Optimizing Pressure Drop,
the presenter Chris Watson, will discuss the complexities
of designing a valve while controlling pressure drop and
what this means for the overall design of the finished
product, followed by a short demo and an opportunity for
Q&A from the audience.
-
ANSYS Webinar - Ask the Expert - ANSYS Meshing Platform for CFD Analysis
Online Event, October 14, 2009
To begin, our experts will make a short presentation on
meshing using the ANSYS meshing platform demonstrating how
to apply different meshing technologies to different bodies
and use mesh controls to improve the mesh. Then,
participants in the forum can take over by calling in their
questions – instructions for this process will be given
throughout the session.
-
Training on Turbomachinery Design and Optimization in Tokyo, Japan, October 13-15
Course, Tokyo, Japan, October 13, 2009
SoftInWay announces a 3-day interactive training workshop on
turbomachinery design, analysis and optimization that will
be held on October 13-15, in Tokyo, Japan.
-
ANSYS Webinar: Modeling Fan and Blower Systems Using ANSYS 12.0
Online Event, October 13, 2009
This webinar will highlight the creation of work flows in
ANSYS Workbench, incorporating 1-D and 2-D design tools,
both general and turbo-specific geometry and meshing tools
(ANSYS DesignModeler, ANSYS Meshing, ANSYS BladeModeler,
and ANSYS TurboGrid), CFD Solvers (ANSYS CFX 12.0 and ANSYS
FLUENT 12.0), and post-processing (ANSYS CFD-Post).
-
Active Flow Control using LES
Workshop, Chalmers University of TEchnology, Gothenburg, Sweden, October 13, 2009
Flow control is one of the hottest research areas in fluid
mechanics. The use of active flow control (AFC) can be used
for many applications including
* drag reduction;
* lift enhancement (or reduction) for aeroplanes and
helicopters;
* separation control in internal flow;
* noise control;
* transition control.
Large eddy simulation is an efficient tool for designing
efficient use of AFC
-
Advanced Training Courses on MPI and GPGPUs
Course, University of Cambridge, Cambridge, United Kingdom, October 12, 2009
Advanced Training (CPD) courses on MPI and GPGPUs at the
University of Cambridge (October 2009)
-
OpenFOAM Introductory and Advanced course, Stuttgart (Germany)
Course, Stuttgart, Germany, October 8, 2009
Two-Day Introductory and Advanced OpenFOAM courses delivered
by Prof. Hrvoje Jasak and Henrik Rusche.
-
4th worshop on CFD modeling for MBR applications
Workshop, Aachen, Germany, October 7, 2009
1-day CFD-workshop will be held in Aachen (Germany) on
October 7, 2011 in conjunction with the 6th IWA Specialised
Conference on Membrane Technology for Water and Wastewater
Treatment in Aachen (October 4-7, 2011).
-
ANSYS Webinar: ANSYS Offshore 12.0 Product Update
Online Event, October 6, 2009
This Webinar will outline the latest features at ANSYS 12.0
of the ANSYS AQWA and ANSYS ASAS software for wave
hydrodynamics and structural integrity analysis of fixed
and floating offshore systems, whether in the traditional
oil and gas and marine markets or in the area of offshore
wind turbines.
-
Course on CFD of Multiphase Flows
Course, University of Twente, Enschede, Netherlands, October 5, 2009
With this course we intend to provide detailed knowledge on
the physical foundation of multiphase flow models and the
associated numerical solution methods. Due to its relevance
for many industrial applications the emphasis during the
course will be on dispersed multiphase flows. The course
includes hands-on computer sessions in which several in
house simulation tools will be used to solve complex
multiphase fluid flow problems.
-
Training in Thailand on October 2-6: Basics of Axial Turbines and Turbomachinery Flow Path Design
Workshop, Bangkok, Thailand, October 2, 2009
The 5-day course includes axial turbine fundamentals and an
interactive workshop on turbomachinery design, analysis and
optimization with AxSTREAM.
-
"CAE Technologies for Industry" - EnginSoft International Conference
Conference, Bergamo, Italy, October 1, 2009
Leading experts and key companies, among them many
multinationals, will highlight CAE applications in
automotive, aerospace, energy, marine, oil&gas, consumer
goods, environment, biomedicine and other areas.
-
PLM Road Map 2009
Conference, The Inn at St John's, Plymouth, United States, September 22, 2009
PLM Road Map is a strategic conference focused on the
critical trade-offs that shape product development.
-
TURBOdesign Suite Pumps & Hydraulic Turbines Design Workshop
Workshop, Radisson Grafton Hotel, London, United Kingdom, September 21, 2009
Advanced Design Technology, a global leader in the
development
of advanced turbomachinery design methods, is delighted to
announce a two day hands-on workshop to improve the design
and
analysis of pumps and hydraulic turbines.
-
5-Day Integrated Course on Axial Turbine Fundamentals and Turbomachinery Design with AxSTREAM
Workshop, Dusseldorf, Germany, September 21, 2009
SoftInWay announces an intensive 5-day training course that
combines Axial Turbine Fundamentals (2 days) and AxSTREAM
Interactive Workshop on Turbomachinery Flow Path Design and
Optimization (3 days).
-
The 4th Symposium on Numerical Analysis of Fluid Flow and Heat Transfer
Conference, Hotel Aquila Rithymna Beach, Rethymno, Greece, September 18, 2009
The 4th Symposium on Numerical Analysis of Fluid Flow and
Heat Transfer is a part of the International Conference of
Numerical Analysis and Applied Mathematics 2009 (ICNAAM
2009). Topics to be covered during ICNAAM2009 include
all the research areas of Numerical Analysis and
Computational Mathematics and all the research areas of
Applied and Industrial Mathematics.
-
2009 FLOW-3D World Users Conference
User Conference, Mayflower Park Hotel, Seattle, United States, September 17, 2009
The 2009 FLOW-3D World Users Conference will be held
September 17-18, 2009 at the historic Mayflower Park Hotel
in Seattle, Washington. Last year's conference in Santa Fe
saw a full and diverse schedule of presented topics, and
this year we expect the same. As usual, a full complement
of Flow Science staff will be on hand, both to present the
development plans for FLOW-3D and to engage attendees in
detailed conversations and consultations.
-
Portuguese Conference MEFTE BRAGANCA 09
Conference, Campus Santa Apolonia, Braganca, Portugal, September 17, 2009
III Portuguese Conference on Fluid Mechanics,
Thermodynamics and Energy.
-
MTCA'09: Workshop on Modern Trends in Computational Aerodynamics
Workshop, University of Birmingham, Birmingham, United Kingdom, September 16, 2009
MTCA'09 aims to discuss the most recent ideas and methods
in computational aerodynamics as well as problems that
should be challenged for future progress in this field. The
scope of the workshop is outlined by the following main
topics: (a) grid generation and solution grid adaptation
and (b) the issues of implementation of higher order
discretization schemes in computational aerodynamics.
-
FLOW-3D: Advanced Casting and Hydraulics Training
Workshop, Mayflower Park Hotel, Seattle, United States, September 16, 2009
Flow Science will conduct advanced training for hydraulics
and casting FLOW-3D users on September 16, the day before
the 2009 FLOW-3D World Users Conference.
-
Free Webinar on Designing the Flow Paths of Mixed Flow Compressors
Online Event, September 15, 2009
The webinar presents AxSTREAM software to successfully
design mixed flow compressors accelerate the product
development process.
-
3rd Workshop on CFD Modelling for Membrane BioReactors Applications
Workshop, LISBP laboratory - 135 avenue de Rangueil - , Toulouse, France, September 11, 2009
The workshop will include discussions about:
- modelling of gas-liquid flow (at local scale, at the
module scale, at the entire station scale)
- modelling membrane-bubble interactions, module-bubble
interactions and link with aeration system or biology
- limits of CFD modelling
-
Quality and Reliability of Large-Eddy Simulations II - QLES2009
Workshop, Piazza dei Cavalieri, Pisa, Italy, September 9, 2009
The focus of QLES2009 will be on issues related to
assessing, assuring, and predicting the quality of LES. The
QLES2009 workshop invites original contributions which
enhance the knowledge on error sources and their interaction
in LES, and may lead to criteria for the prediction and
optimization of simulation quality. The QLES2009 workshop is
the second workshop in the QLES series. Its predecessor,
QLES2007, was organized in 2007 in Leuven, Belgium.
-
First International Conference on Computational Methods for Thermal Problems
Conference, Napoli, Italy, September 8, 2009
The First International Conference on Computational Methods
for Thermal Problems aims at bringing together researchers,
scientists, practitioners and students interested in this
area of research in order to discuss the most recent
developments and the challenges that the future holds in
this field.
-
OpenFOAM Summer School 2009, University of Zagreb
Course, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, Croatia, September 2, 2009
Second Summer School on Numerical Modeling of Coupled
Problems in Applied Physics with OpenFoam (NUMAP-FOAM) for
PhD students and young researchers in Zagreb in September
2009.
-
Workshop LESTAC
Workshop, Marseilles, France, August 24, 2009
LES of Turbulence, Acoustics and Combustion
-
ANSYS Webinar: Implicit to Explicit Structural Simulation
Online Event, August 11, 2009
Attend this webinar to see how to combine the ANSYS
Mechanical and ANSYS AUTODYN tools to provide an easy to
use implicit/explicit solution that is interactive and
quickly learned.
-
ANSYS Ask the Expert Series
Online Event, July 29, 2009
Our panel of experts will be available online to answer
your questions on various uses of ANSYS Software. The
series will be held every Wednesday in the month of August
and September covering a wide variety of topics.
Go to http://www1.ansys.com/customer/webinars/#expert to
register today.
-
HyperWorks Enabled Community- Webinar Series Summer 2009
Online Event, July 27, 2009
This complimentary webinar series is an opportunity to take
a deeper look at the latest HyperWorks Enabled Partner
Applications. Each 45-minute webinar will be dedicated to
one application. To accommodate multiple time zones, there
will be duplicate sessions hosted for each partner
application.
Register at www.hyperworkscommunity.com/webinar
-
International Conference and Advanced School "Turbulent Mixing and Beyond," TMB-2009
Conference, International Center for Theoretical Physics, Trieste, Italy, July 27, 2009
The goals of the International Conference "Turbulent Mixing
and Beyond" are to expose the generic problem of
Non-equilibrium Turbulent Processes to a wide scientific
community, to promote the development of new ideas in
tackling the fundamental aspects of the problem, to assist
in application of novel approaches in a broad range of
phenomena, where the turbulent processes occur, and to have
a potential impact on technology (please, visit
http://users.ictp.it/~tmb/main/about.html for more details).
-
Webinar Series, Part 2: Solutions for Electrical Machines Including Control
Online Event, July 23, 2009
Integrating high fidelity electromagnetic and
electromechanical physics based models into a system level
simulation, can assist the engineers in optimizing drive
performance as well as controlling harmonics and mitigating
conducted and radiated EMI/EMC. This webinar series will
review the methodology employed to achieve this integration.
-
Webinar on Design and Multidisciplinary Optimization of Turbomachinery with AxSTREAM
Online Event, July 23, 2009
The event presents effective methods of multidisciplinary
(stress and vibration, aerodynamics and heat transfer)
optimization and analysis of turbomachinery flow path using
AxSTREAM software.
-
Webinar Series, Part 2: Solutions for Electrical Machines Including Control
Online Event, July 21, 2009
Integrating high fidelity electromagnetic and
electromechanical physics based models into a system level
simulation, can assist the engineers in optimizing drive
performance as well as controlling harmonics and mitigating
conducted and radiated EMI/EMC. This webinar series will
review the methodology employed to achieve this integration.
-
Webinar Series, Part 1: Solutions for Battery Modeling and IGBT Inverter Modeling
Online Event, July 16, 2009
Integrating high fidelity electromagnetic and
electromechanical physics based models into a system level
simulation, can assist the engineers in optimizing drive
performance as well as controlling harmonics and mitigating
conducted and radiated EMI/EMC. This webinar series will
review the methodology employed to achieve this integration.
-
Simulation, Testing and Diagnostics for Combustion
Seminar, Via Celoria 16, Milano, Italy, July 14, 2009
Seminar by "Comitato Italiano per la Ricerca sulle Fiamme".
-
CFD-Industrial training
Course, SEED Infotech Ltd,Karve Rd,Pune, Pune, India, July 11, 2009
SEED Infotech would be launching CFD-Industrial training
(only Sat-Sun)on 11th July 09.
-
10th Clean Air Conference
Conference, Instituto Superior Tecnico, Lisbon, Portugal, July 7, 2009
The conference deals with interconnected
themes covering the reduction of local and global
environment degrading emissions and aims to a better
integration of supply and demand. The conference is a
platform to describe, compare and evaluate new and
innovative technologies, which maximise energy conversion
while minimizing undesirable emissions. Attention is also
given to the improvement of existing energy systems which
will still be used for a long time.
-
EASC - European Automotive Simulation Conference
Conference, Hilton Munich Park Hotel, Munich, Germany, July 6, 2009
The 2009 event will cover the full spectrum of simulation
and account for the entire range of physics that are
relevant in vehicle design; namely structural, fluids,
thermal and electronic design automation. This, the 4th
EASC, offers a unique opportunity to get a comprehensive
update on the latest technologies in Engineering Simulation
for the Automotive Industry.
-
ANSYS Webinar: Drop Testing Virtual Product Designs
Online Event, June 30, 2009
See how the benefits of fewer physical prototypes, shorter
product development cycles and drastically reduced product
warrantee costs can be realized with the new and
surprisingly affordable ANSYS Explicit STR product.
-
NAFEMS Accredited Computational Fluid Dynamics Summer School
Course, University of Nottingham, Nottingham, United Kingdom, June 23, 2009
The objective of the course is to empower users with tools
and techniques in CFD, which can be applied to a wide range
of industrial applications.
This course will provide understanding of the mathematical
foundation and focus on a detailed overview of the physical
models necessary for applications in Chemical, Civil,
Environmental and Mechanical Engineering and many other
fields of engineering.
-
STARGlobal Forum 2009: Simulation for Energy Engineering
Conference, Sugar Land Marriott Town Square, 16090 City Walk, Sugarland (Houston), United States, June 23, 2009
The 2009 Energy Forum will showcase the results and
business benefits
energy engineers are achieving using 3-D flow, thermal, and
stress
simulation. This event provides an excellent forum for
participants to learn
more about how simulation is facilitating innovation in the
Energy industry
for competitive advantage through improved design and
development for risk
avoidance and performance improvements.
-
AxSTREAM in Turbomachinery Education - From a Couple of Parameters to Complete 3D Flow Path Design in a Few Classes
Online Event, June 18, 2009
The webinar is aimed at providing the educational community
with new effective tools and methods to teach the basics of
turbomachinery design. The program covers such topics as
influence of main design parameters on turbomachinery
performance; operation of turbomachinery in design and off
design modes; 3D approach to design vortex airfoil and
others.
-
Materials Characterisation 2009
Conference, New Forest, United Kingdom, June 17, 2009
The conference objective is to bring together
researchers who use computational methods, those who perform
experiments, and of course those who do both, in all areas
of materials characterisation, to discuss their recent
results and ideas, in order to foster the multidisciplinary
approach that has become necessary for the study of complex
phenomena. Topics of interest for this Conference range
from generic characterisation methods to damage assessment
and application to particular materials.
-
NAFEMS World Congress 2009
Conference, Creta Maris Conference Center, Limin- Hersonissos, Greece, June 16, 2009
This, the 12th International Conference organized by
NAFEMS, brings together a wide range of leading industrial
experts and academic researchers, to provide a unique
insight into current best practice and future state-of-the-
art in FEA and CFD. With over 150 presentations from
industry, consultancy, software vendors and acadamia from
around the globe, the agenda provides the largest and most
comprehensive independent global view of simulation
available.
-
ANSYS Webinar: ANSYS 12.0 Meshing for Automotive Applications
Online Event, June 16, 2009
ANSYS Workbench 2.0 meshing tools allow greater automation,
which are perfect for design optimization and upfront
simulation.
-
Multiphase Flow 2009
Conference, Wessex Institute of Technology, New Forest, United Kingdom, June 15, 2009
The fifth International conference on Computational Methods
and Experiments in Materials Characterisation aims to bring
together modellers, computational scientists and
experimentalists to share experiences, successes, new
methodologies and in general to promote the advancement of
the stidy of multiphase flows.
-
Fourteenth Internatioanl Conference on Computational Methods and Experimental Measurements - CMEM 2009
Conference, Algarve, Portugal, June 10, 2009
CMEM 2009 is the fourteenth International Conference in this
well established series on Computational Methods and
Experimental Measurements. These successful meetings provide
a unique forum for the review of the latest work on the
interaction between computational methods and experimental
measurements.
-
Using Flowmaster V7 as your COTS solution for the simulation of your secondary air systems at ASME Turbo Expo 2009
Seminar, Orlando World Center Marriott Resort & Convention Center, Orlando, United States, June 9, 2009
Join Flowmaster at ASME Turbo Expo 2009, Orlando, FL, June
8th to 12th, the premier event for the Gas Turbine
industry.
Mike Croegaert, Gas Turbine Product Manager will be
presenting: Using Flowmaster V7 as your COTS solution for
the simulation of your secondary air systems, on the
Expositing Stage, during the Expo Reception at 5pm, June
9th.
-
ANSYS 12.0 Seminar Series - Dearborn, MI
Seminar, Hyatt Regency Dearborn, Dearborn, United States, June 9, 2009
Learn about the new features of ANSYS 12.0 from ANSYS team
members and industry experts through the ANSYS 12.0 Seminar
Series. The series will demonstrate how our users are
benefiting from Simulation Driven Product Development
resulting in improved products and processes.
-
From Images to Computational Hemodynamics
Simula Research Laboratory, Oslo, Norway, June 8, 2009
Summer school on computational hemodynamics using VMTK and
FEniCS
-
Interactive Training on Turbomachinery Flow Path Design with AxSTREAM
Workshop, , Orlando, United States, June 5, 2009
SoftInWay Inc. organizes a 3-day intensive course focused on
design, analysis, optimization and retrofit of axial and
radial turbomachinery flow path.
-
ANSYS 12.0 Seminar Series - Philadelphia, PA
Seminar, Park Hyatt Philadelphia at the Bellevue, Philadelphia, United States, June 3, 2009
Learn about the new features of ANSYS 12.0 from ANSYS team
members and industry experts through the ANSYS 12.0 Seminar
Series. The series will demonstrate how our users are
benefiting from Simulation Driven Product Development
resulting in improved products and processes.
-
ANSYS Webinar: Linear Dynamics
Online Event, June 2, 2009
Topics included in this webinar include rotordynamics
computation, component mode synthesis, modal assurance
criterion, spectrum analysis. Learn more about the new
exciting SNODE solver that provides increased performance
in the computation of large models, as well as recent
advances in high performance computing.
-
ANSYS Webinar: ANSYS 12.0 HPC Performance and ROI
Online Event, June 2, 2009
For those seeking to optimize their use of computing
resources and investment in simulation, this session will
provide valuable guidelines on where and how to deploy HPC
for simulation.
-
Hybrid RANS-LES Methods for Industrial CFD : Overview, Guidance and Examples
Course, GE GLOBAL RESEARCH CENTRE, MUNICH, Germany, June 2, 2009
The aim of the 2-day course is to provide 1) an overview
of turbulence modelling, 2) a firm foundation in the
theory and ideas underlying, RANS, LES and Hybrid RANS-LES
techniques, 3) recommendation and guidance for the
appropriate and effective application of Hybrid RANS-
LES,and 4) examples from real-world engineering
simulations, using the DES class of models.
-
Fourth OpenFOAM Workshop
Workshop, Ecole Polytechnique de Montreal, Montreal, Canada, June 1, 2009
Fourth OpenFOAM Workshop
-
ANSYS 12.0 Seminar Series - Houston, TX
Seminar, Hyatt Regency Houston, Houston, United States, May 27, 2009
Learn about the new features of ANSYS 12.0 from ANSYS team
members and industry experts through the ANSYS 12.0 Seminar
Series. The series will demonstrate how our users are
benefiting from Simulation Driven Product Development
resulting in improved products and processes.
-
Webinar: Thermal Solutions with HFSS and ANSYS Mechanical
Online Event, May 26, 2009
Join us for this free one-hour webinar and see how our
users are benefiting from the insight that computer
simulation offers.
-
Mulitphase Flows - FZD & ANSYS Short Course and Workshop
Conference, Forschungszentrum Dresden-Rossendorf e.V., Dresden, Germany, May 26, 2009
7th FZD & ANSYS Short Course & Workshop "Multiphase Flow -
Simulation, Experiment and Applications".
-
Fluid Structure Interaction 2009
Conference, Royal Mare Village, Greece, May 25, 2009
Fluid Structure Interaction 2009 is the fifth conference in
this successful series, which provides a forum for the
presentation of new ideas and the latest work in the
specialised field of fluid structure interaction. The
conference aims to promote international
exchange of information and knowledge of fluid structure
interaction problems, giving experts from different
application fields the opportunity to interact with one
another and to provide valuable cross breeding of ideas and
techniques.
-
ANSYS 12.0 Seminar Series - Santa Clara, CA
Seminar, Hyatt Regency Santa Clara, Santa Clara, United States, May 20, 2009
Learn about the new features of ANSYS 12.0 from ANSYS team
members and industry experts through the ANSYS 12.0 Seminar
Series. The series will demonstrate how our users are
benefiting from Simulation Driven Product Development
resulting in improved products and processes.
-
Webinar: ANSYS Workbench 2.0 for ANSYS FLUENT Users
Online Event, May 19, 2009
Join us for this free one-hour webinar and see how our
users are benefiting from the insight that computer
simulation offers.
-
Simulation for Turbomachinery Engineering
Seminar, CINECA, Casalecchio di Reno - Bologna, Italy, May 19, 2009
Presentations, Demonstrations, Customer Testimonials will be
given about : Fluid-Dynamics, Mechanics, Fluid-Structure
Interaction.
-
Webinar: ANSYS 12.0 Explicit Dynamics STR
Online Event, May 19, 2009
Join us for this free one-hour webinar and see how our
users are benefiting from the insight that computer
simulation offers.
-
21st International Conference on Parallel Computational Fluid Dynamics (ParCFD)
Conference, Moffett Field, United States, May 18, 2009
ParCFD 2009 is the 21st in a series of international
meetings dedicated to
discussion of recent developments and applications of
parallel computing in
the field of CFD and related disciplines. Past paper topics
include: parallel
algorithms, developments in software tools and
environments, unstructured
adaptive mesh applications, industrial applications, and
more.
-
6th Int'l Conference on Numerical Analysis in Engineering (nae2009)
Conference, Sheraton Senggigi Beach Resort, Mataram city, Lombok Island, Indonesia, May 15, 2009
Numerical analysis utilizing the advantages of the
development of computer hardware and software has had an
immerse impact in many field of engineering in recent
years as it offers fast solution in engineering problems.
The 6th International Conference on Numerical Analysis in
Engineering NAE 2009 gives a place and opportunities for
researchers and engineers from academic, industries and
other institutions to exchange their scientific and
technological information.
-
Webinar on Design and Re-design of Flow-Path for High-Efficiency Steam and Gas Turbine
Online Event, May 14, 2009
SoftInWay offers free webinar: Design and Re-design of
Flow-Path for High-Efficiency Steam and Gas Turbine on
Thursday, May 14, at 10 a.m. and 4 p.m. EST. After the
webinar attendees will be able to shorten the design time
and costs while performing 1D/2D/3D design and analysis of
turbomachinery flow paths.
-
NAFEMS Two Day Practical CFD Analysis Training Course
Course, Holiday Inn Coventry South, Coventry, United Kingdom, May 13, 2009
The course offers excellent guidance on how to judge which
approximations are acceptable and appropriate for solving a
wide range of practical problems. Of equal importance is
the manner in which the results are interpreted. Advice is
provided which allows the correct decisions to be taken,
based on results which are known to be reliable.
The course is completely code independent.
-
2nd National Computational Fluid Dynamics (CFD) Applications in Chemical Engineering
Conference, Narmak, Tehran, Iran, May 12, 2009
The National Conference on Applications of CFD in Chemical
Engineering is the premier forum for the presentation of
new advances and research results in the fields of
theoretical, experimental, and applied CFD in process
industries, oil & gas engineering, mineral, polymer and
food processing.
-
Webinar: ANSYS 12.0 Fluid Dynamics
Online Event, May 12, 2009
Join us for this free one-hour webinar and see how our
users are benefiting from the insight that computer
simulation offers.
-
Webinar: Parametric Analysis -- Introducing ANSYS DesignXplorer 12.0
Online Event, May 12, 2009
Join us for this free one-hour webinar and see how our
users are benefiting from the insight that computer
simulation offers.
-
2009 FLOW-3D European Users Conference
User Conference, Hotel Krone, Tubingen, Germany, May 12, 2009
The 2009 FLOW-3D(R) European Users Conference will be held
on
May 12, 2009 at the Hotel Krone in Tubingen, Germany! As in
recent years, we expect participants from all over Europe
and interesting user presentations which will certainly
stimulate an intense exchange of experiences.
-
International Short Course: Flow Transition and Turbulence - Physical Nature and High Order DNS Code
Course, 487 PKH, 411 S. Nedderman, UTA Math, Arlington, TX, United States, May 11, 2009
Part I Physical Nature -Turbulence Origin in Boundary-Layer
Flows, Predominant Mechanisms and Applications (Yury S.
Kachanov)
Part II Direct Numerical Simulation for Flow Transition and
High Order DNS Code (Chaoqun Liu)
-
SIMDI09 - Simulation and Data Intensive Fair
Seminar, Chalmers Conference Center, Gothenburg, Sweden, May 6, 2009
SIMDI09 will be the fourth edition of our annual Simulation
and Data Intensive Fair. In the past years, SIMDI has
become an international and recognized event, where
industrial and academic professionals share their knowledge
about the latest Simulation and Data Intensive
technologies.
-
Webinar: ANSYS Workbench 2.0 Introduction
Online Event, May 5, 2009
Join us for this free one-hour webinar and see how our
users are benefiting from the insight that computer
simulation offers.
-
Webinar: ANSYS 12.0 Structural Mechanics
Online Event, May 5, 2009
Join us for this free one-hour webinar and see how our
users are benefiting from the insight that computer
simulation offers.
-
ANSYS Webinar: Getting Your Solar Energy Project Off to a Rapid Start
Online Event, April 30, 2009
Learn how ANSYS technology is applied in solar energy
project execution - from material and process innovation to
product design and performance analysis.
-
ANSYS Webinar: Wind Energy Projects - From Blade Design to Wind Farms
Online Event, April 29, 2009
Learn how ANSYS engineering simulation accelerates
understanding of the hydrodynamic and structural design
aspects of blades, rotor assemblies and support structures,
along with wind effects and system-level design.
-
Virtual Tow Tank - Computational Simulation Training for Naval Architects & Marine Engineers
Course, Rockville, United States, April 21, 2009
The aim of this course is to teach the techniques needed to
conduct accurate and efficient marine simulations using
computational fluid dynamics. The course is structured as a
combination of lectures, demonstrations and workshops
(tutorials). Best practices for meshing and analysis of
stationary and multi-degree-of-freedom (DOF) free-surface
applications are emphasized and demonstrated.
-
Progress in Wall Rurbulence: Understanding and Modelling
Workshop, Laboratoire de Mecanique de Lille, Villeneuve d'Ascq, France, April 21, 2009
Final WORKSHOP of the FP6 European project "WALLTURB"
-
Webinar on Axial Compressor Performance Analysis to Optimize the Manufacturing and Repair Costs
Online Event, April 16, 2009
The webinar focused on design, analysis, repair, and
overhaul of existing turbomachinery, resulting in cost and
time reductions. SoftInWay will discuss the main
difficulties engineers face and provide the preferable
procedure for flow path analysis supported by illustrative
examples.
-
Effective Use of CFD for In-flight Icing Certification
Course, University of Nevada Las Vegas, Las Vegas, United States, April 13, 2009
This course illustrates the state-of-the-art of CFD
applications in icing
simulations and links theory to applications.
-
M.Tech Program in CFD
Course, P-14, Rajiv Gandhi Infotech park, Hinjewadi, Pune, India, April 10, 2009
Following M.Tech Degree Programs are offered at the
International Institute of Information Technology, Pune,
India, in academic articulation with University of Petroleum
& Energy Studies, Deharadun.
# M.Tech (Computational Fluid Dynamics)
# M.Tech (Gas Engineering )
# MBA (Oil & Gas Management)
-
Advances in Mixing and Combustion
Seminar, GE GLOBAL RESEARCH CENTRE, MUNICH, Germany, April 8, 2009
This event is a 1-day seminar for practitioners and
technical managers in the field of mixing and combustion.
It will describe advances and developments in this field
which have recently been shown to be critical to
performance and emission control. The day will introduce
advance and practicable concepts, ranging from
system architecture and measurement techniques to the
latest ideas in numerical modelling.
-
ANSYS Webinar: Simulation for Renewable Energy Technologies
Online Event, April 1, 2009
This webinar will explain how and why simulation tools from
ANSYS, Inc. are being applied to the hydropower, biomass,
wind, and solar industries.
|
