CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Basic aspects of discretization

Basic aspects of discretization

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
(I have added some structure to the page and linked to the section on finite differences. I will add more soon.)
(I intend to give a small intro to FEM in the corresponding section soon, but have not much knowledge of FVM - hope someone will add to that section by giving an introduction.)
Line 13: Line 13:
<math> f'(x_i)= \frac{f(x_{i+1})-f(x_i)}{x_{i+1}-x_i} </math> where subscripts are node indices of the mesh.
<math> f'(x_i)= \frac{f(x_{i+1})-f(x_i)}{x_{i+1}-x_i} </math> where subscripts are node indices of the mesh.
-
The article on finite difference method is [[Finite Difference|here]].
+
The article on finite difference method is [[Finite volume|here]].
===Finite Volumes===
===Finite Volumes===
 +
 +
The article on finite difference method is [[Finite difference|here]].
===Finite Elements===
===Finite Elements===
 +
 +
==Meshfree Methods==
 +
Several kinds of meshfree methods are also in use. Many are being actively developed. Some such methods are:
 +
# Smooth Particle Hydrodynamics (SPH)
 +
# Finite Pointset Method (FPM) (This is relatively recent)

Revision as of 04:32, 21 May 2014

There are various methods of discretization, which can broadly be classified into mesh (grid) methods and mesh-free methods. Currently (as of 2014), mainly mesh methods are being used.

Contents

Mesh Methods

These methods involve two steps:

  1. Meshing - divide the region ("domain") into smaller regions. These smaller regions may be triangles and rectangles (in 2D) and tetrahedrons, hexahedrons (in 3D) and other types of geometric entities. The vertices of these geometric entities are called nodes.
  2. Discretization of the governing equations over the mesh

Finite Differences

The general idea behind discretization is to break a domain into a mesh, and then replace derivatives in the governing equation with difference quotients. There are several ways in which this can be done - the most prominent being forward difference, backward difference and central difference.

To give an example, in the forward difference scheme, derivatives are approximated as follows.  f'(x_i)= \frac{f(x_{i+1})-f(x_i)}{x_{i+1}-x_i} where subscripts are node indices of the mesh.

The article on finite difference method is here.

Finite Volumes

The article on finite difference method is here.

Finite Elements

Meshfree Methods

Several kinds of meshfree methods are also in use. Many are being actively developed. Some such methods are:

  1. Smooth Particle Hydrodynamics (SPH)
  2. Finite Pointset Method (FPM) (This is relatively recent)
My wiki