importing cas and data files from Fluent

azi · February 17, 2020, 20:06

Hi
I have a problem with importing cas and data files from Fluent.
The geometry is a bend that looks like the attached bend_ file. But, when I load cas and data files to tecplot, it looks like the attached bend_tecplot file.

I was wondering if any of you are able to help me to figure out the problem.
Thanks in advance
Navid

Svetlana · February 18, 2020, 19:03

Can you please attach an example?

azi · February 19, 2020, 22:55

Quote:

Originally Posted by Светлана

Can you please attach an example?

Thanks for your reply
Unfortunately, cas and data files are too big (more than 1Gb).
One side of the bend pipe appeared to be flat once I open it with Tecplot, as attached in the question. (that is what I got from Tecplot).
However, the cas and data files are working well with CFD-post.
Cheers
Navid

Svetlana · February 20, 2020, 20:06

Hi azi/Navid

There is 2GB of space in dropbox free account. Perhaps attach the first file and post it here. After I download it, remove it from your dropbox and upload the other file.

Regards
Svetlana

azi · February 21, 2020, 01:41

Hi Svetlana
Thanks for your reply.
Here is the link for both cas and data files
https://universityofadelaide.box.com...2yls6t9njkegl5
Thanks a lot
Navid

Brandon_CFD · March 3, 2020, 14:56

Hello Azadeh,

The axis scaling needs to be adjusted. I attempted to adjust the Y axis scaling to 1 initially and found that I needed to first extend the Data Aspect ratio limit to 30. Let us know if you have additional questions at support@tecplot.com.

March 3, 2020, 14:56		#6
Brandon_CFD Member Brandon M Join Date: Feb 2019 Posts: 38 Rep Power: 7	Hello Azadeh, The axis scaling needs to be adjusted. I attempted to adjust the Y axis scaling to 1 initially and found that I needed to first extend the Data Aspect ratio limit to 30. Let us know if you have additional questions at support@tecplot.com. Svetlana likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Easy way for exporting data from fluent	seyedashraf	FLUENT	2	February 19, 2016 05:20
error in load cas & data files	sara22	Tecplot	0	April 3, 2014 11:21
The fluent stopped and errors with "Emergency: received SIGHUP signal"	yuyuxuan	FLUENT	0	December 3, 2013 23:56
Two conditions in Fluent journal files	bobmalaria	FLUENT	5	November 10, 2011 06:31
[making animations] fclose fails to close files?	Mika	FLUENT	0	March 30, 2001 09:19

February 18, 2020, 19:03		#2
Svetlana Senior Member Svetlana Tkachenko Join Date: Oct 2013 Location: Australia, Sydney Posts: 416 Rep Power: 15	Can you please attach an example?

February 20, 2020, 20:06		#4
Svetlana Senior Member Svetlana Tkachenko Join Date: Oct 2013 Location: Australia, Sydney Posts: 416 Rep Power: 15	Hi azi/Navid There is 2GB of space in dropbox free account. Perhaps attach the first file and post it here. After I download it, remove it from your dropbox and upload the other file. Regards Svetlana

February 21, 2020, 01:41		#5
azi New Member Azadeh Join Date: May 2014 Posts: 7 Rep Power: 12	Hi Svetlana Thanks for your reply. Here is the link for both cas and data files https://universityofadelaide.box.com...2yls6t9njkegl5 Thanks a lot Navid