Mesh Visualisation: Showing every 5th grid point

TomWaits · August 25, 2019, 07:15

Hi All,

Is there a way to show every 5th (or every nth) grid point to better visualise a very fine mesh?

This question was asked in 2010 here: "http://www.tecplottalk.com/forums/viewtopic.php?t=1188" with the answer being no. Have the tecplot updates since allowed for this visualisation?

novedevon · August 26, 2019, 13:43

For a mesh visualization, there is no way to reduce the density of the mesh and which would have to re-do the mesh connectivity within Tecplot. (Other that importing a new mesh and interpolating to it which I'm assuming that's not what you want to do).

If you are interested in looking at the grid points as vectors or scatter points. Those can be reduced and controlled from the "Points">"Point to Plot" & "Index Skip" of the "Zone Style" dialog.

August 25, 2019, 07:15	Mesh Visualisation: Showing every 5th grid point	#1
TomWaits Member Tom Waits Join Date: Aug 2018 Posts: 42 Rep Power: 8	Hi All, Is there a way to show every 5th (or every nth) grid point to better visualise a very fine mesh? This question was asked in 2010 here: "http://www.tecplottalk.com/forums/viewtopic.php?t=1188" with the answer being no. Have the tecplot updates since allowed for this visualisation?

August 26, 2019, 13:43		#2
novedevon Member Join Date: May 2013 Posts: 61 Rep Power: 13	For a mesh visualization, there is no way to reduce the density of the mesh and which would have to re-do the mesh connectivity within Tecplot. (Other that importing a new mesh and interpolating to it which I'm assuming that's not what you want to do). If you are interested in looking at the grid points as vectors or scatter points. Those can be reduced and controlled from the "Points">"Point to Plot" & "Index Skip" of the "Zone Style" dialog. ronithstanly and TomWaits like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to set periodic boundary conditions	Ganesh	FLUENT	15	November 18, 2020 07:09
FFD shape deformation for 3D wing not changing the mesh	lwc24	SU2 Shape Design	5	August 1, 2019 16:17
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 19:57
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 04:52
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 10:38