Slicing a 3d model

hasanifte · March 30, 2015, 16:56

Hi Every one,

I imported a 3d model .dat file from Fluent in tecplot using fluent data loader.

I used sliced function to slice at different planes. Now I want to view these sliced plots in 2D with a scale/ruler/grid on them. How can I do that?

Your help is really appreciated.

Regards,

Hassan

JerimiahLee · April 1, 2015, 17:56

Hello hasanifte,

If you extracted the slice into a zone you can then switch to 2D Cartesian view and make sure that the new zone is the only active zone. Then by going to Options > Ruler/Grid, you can turn on a Ruler, or by turning on the Paper you can then see a grid in the background.

hasanifte · April 1, 2015, 18:30

Quote:

Originally Posted by JerimiahLee

Hello hasanifte,

If you extracted the slice into a zone you can then switch to 2D Cartesian view and make sure that the new zone is the only active zone. Then by going to Options > Ruler/Grid, you can turn on a Ruler, or by turning on the Paper you can then see a grid in the background.

Thanks JerimiahLee.

Could you please guide how to active a particular zone?

JerimiahLee · April 1, 2015, 18:31

Go to Data > Extract > Current Slice.

hasanifte · April 1, 2015, 18:52

Current slice option is not available.

I have created two slices usign Extract > Slice from Plane. Now I would like to view extracted slices as 2D. How Can I active particular zones/slice?

JerimiahLee · April 1, 2015, 18:56

At this point, you should switch to 2D Cartesian, then open the Zone Style Dialog. On this page turn off all the zones except for the slice you want to view. The Show checkbox controls which zones are visible.

hasanifte · April 5, 2015, 12:58

How can I take derivative of x velocity wrt y?

Whats is the syntax

I tried following syntax but it did not work

{k} = dd (x velocity)/ddy

nvarma · April 6, 2015, 12:21

Look up the variable number for x-velocity and use it. Say if it's number 17, I would use V17 instead of x velocity.

March 30, 2015, 16:56	Slicing a 3d model	#1
hasanifte Member Hassan Iftekhar Join Date: Jan 2015 Posts: 40 Rep Power: 11	Hi Every one, I imported a 3d model .dat file from Fluent in tecplot using fluent data loader. I used sliced function to slice at different planes. Now I want to view these sliced plots in 2D with a scale/ruler/grid on them. How can I do that? Your help is really appreciated. Regards, Hassan

April 1, 2015, 17:56		#2
JerimiahLee New Member Jerimiah Join Date: May 2014 Location: Bellevue, Washington Posts: 13 Rep Power: 16	Hello hasanifte, If you extracted the slice into a zone you can then switch to 2D Cartesian view and make sure that the new zone is the only active zone. Then by going to Options > Ruler/Grid, you can turn on a Ruler, or by turning on the Paper you can then see a grid in the background. hasanifte likes this.

April 1, 2015, 18:56		#6
JerimiahLee New Member Jerimiah Join Date: May 2014 Location: Bellevue, Washington Posts: 13 Rep Power: 16	At this point, you should switch to 2D Cartesian, then open the Zone Style Dialog. On this page turn off all the zones except for the slice you want to view. The Show checkbox controls which zones are visible. hasanifte likes this.

April 6, 2015, 12:21		#8
nvarma Senior Member nm Join Date: Mar 2013 Posts: 100 Rep Power: 13	Look up the variable number for x-velocity and use it. Say if it's number 17, I would use V17 instead of x velocity. hasanifte likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
eddy dissipation model: combustion doesn't occur	roukaia	FLUENT	2	November 18, 2020 11:23
problem with solving lagrange reaction cloud	Polli	OpenFOAM Running, Solving & CFD	0	April 30, 2014 08:53
manualInjection model in sprayFoam	Mentalo	OpenFOAM Running, Solving & CFD	1	April 2, 2014 10:29
eddy dissipation model: combustion doesn't occur	roukaia	FLUENT	0	December 24, 2011 10:10
Problems bout CFD model of biomass gasification, Downdraft gasifier	wanglong	FLUENT	2	November 26, 2009 00:27

April 1, 2015, 18:31		#4
JerimiahLee New Member Jerimiah Join Date: May 2014 Location: Bellevue, Washington Posts: 13 Rep Power: 16	Go to Data > Extract > Current Slice.

April 1, 2015, 18:52		#5
hasanifte Member Hassan Iftekhar Join Date: Jan 2015 Posts: 40 Rep Power: 11	Current slice option is not available. I have created two slices usign Extract > Slice from Plane. Now I would like to view extracted slices as 2D. How Can I active particular zones/slice?

April 5, 2015, 12:58		#7
hasanifte Member Hassan Iftekhar Join Date: Jan 2015 Posts: 40 Rep Power: 11	How can I take derivative of x velocity wrt y? Whats is the syntax I tried following syntax but it did not work {k} = dd (x velocity)/ddy