Scalar Scene

dfa · January 21, 2021, 13:20

Hello,
I am currently running simulations on star ccm+. Unfortunately the scalar scene is coming out patchy. I have attached a photo of the problem. Could the problem be the mesh or is the graphics on the computer? Is there any way to fix this? Thank you in advance.
dfa

Vesta · January 21, 2021, 13:35

What exactly do you mean by patchy in the scene? It might be a little clearer if you took a screenshot of the scene....
Otherwise you can also experiment with the contour style in Scalar.

dfa · January 21, 2021, 13:49

Sorry, the screenshot might show it clearer.

Vesta · January 22, 2021, 06:53

I can't really help you, I guess. But it looks to me more like a simple graphics error. I would perhaps create a plane section or move the existing one a little bit and see how it looks then. Are you using an overset mesh?

ping · January 24, 2021, 04:30

it looks like two coplanar surfaces being displayed- maybe from two regions not setup correctly for overset mesh and certainly a user setup issue and not a graphics one. try right clicking in that area and select hide and it will show the remaining faces.

dfa · January 25, 2021, 05:54

Thanks for all your help. ping, this worked thank you.

January 24, 2021, 04:30		#5
ping Senior Member Ping Join Date: Mar 2009 Posts: 556 Rep Power: 20	it looks like two coplanar surfaces being displayed- maybe from two regions not setup correctly for overset mesh and certainly a user setup issue and not a graphics one. try right clicking in that area and select hide and it will show the remaining faces. Aeronautics El. K. and dfa like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem during mpi in server: expected Scalar, found on line 0 the word 'nan'	muth	OpenFOAM Running, Solving & CFD	3	August 27, 2018 05:18
Division by zero exception - loop over scalarField	Pat84	OpenFOAM Programming & Development	6	February 18, 2017 06:57
Issue symmetryPlane 2.5d extruded airfoil simulation	281419	OpenFOAM Running, Solving & CFD	5	November 28, 2015 14:09
Diverging solution in transonicMRFDyMFoam	tsalter	OpenFOAM Running, Solving & CFD	30	July 7, 2014 07:20
compressible flow in turbocharger	riesotto	OpenFOAM	50	May 26, 2014 02:47

January 21, 2021, 13:35		#2
Vesta New Member Join Date: Dec 2020 Posts: 6 Rep Power: 5	What exactly do you mean by patchy in the scene? It might be a little clearer if you took a screenshot of the scene.... Otherwise you can also experiment with the contour style in Scalar.

January 22, 2021, 06:53		#4
Vesta New Member Join Date: Dec 2020 Posts: 6 Rep Power: 5	I can't really help you, I guess. But it looks to me more like a simple graphics error. I would perhaps create a plane section or move the existing one a little bit and see how it looks then. Are you using an overset mesh?

January 25, 2021, 05:54		#6
dfa New Member -- Select -- Join Date: Nov 2020 Posts: 6 Rep Power: 6	Thanks for all your help. ping, this worked thank you.