[wassli]

Hi everyone,

i am beginner to use star ccm+ and i could not find any option in star ccm+ to give properties of the solid material at wall just like these are given in fluent with wall thickness and properties of wall material...
i need to introduce the solid material at wall and its properties because i am simulating heat transfer problem and get low temperatures at the wall be the same temperature at the inlet and you let....

so please guide me how to define material at the wall so that i will be able to get reasonable results...

Thanks

[lcarasik]

Originally Posted by wassli

Hi everyone,

i am beginner to use star ccm+ and i could not find any option in star ccm+ to give properties of the solid material at wall just like these are given in fluent with wall thickness and properties of wall material...
i need to introduce the solid material at wall and its properties because i am simulating heat transfer problem and get low temperatures at the wall be the same temperature at the inlet and you let....

so please guide me how to define material at the wall so that i will be able to get reasonable results...

Thanks

Have you done any of the heat transfer tutorials?

[wassli]

Originally Posted by lcarasik

Have you done any of the heat transfer tutorials?

no sir, i tried to find heat transfer tutorials on youtube but could not find any single tutorial involving heat transfer.
if you have some please share with me

[lcarasik]

Originally Posted by wassli

no sir, i tried to find heat transfer tutorials on youtube but could not find any single tutorial involving heat transfer.
if you have some please share with me

If you have access to the Steve Portal on CD-Adapco website, the online documentation has the tutorials contained there. If you do not have access to it, go to your local installation through a path similar to this example.

Ex: Windows 10

Computer -> Local Disk (C -> Program Files -> CD-adapco -> STAR-CCM+11.04.012 -> doc

In the doc folder contains the userguide_11.04 (or other version number) and startutorialsdata folder which contains the meshes and other information to use during the tutorials.

Give that a shot and let us know how that works out.