|
[Sponsors] |
![]() |
![]() |
#1 |
Member
Polard
Join Date: Oct 2015
Posts: 31
Rep Power: 10 ![]() |
Hi
I am trying to model interference between 2 sound waves in star ccm+ by using acoustic wave solver . I took a simple t shape domain and tried to create 2 noise sources at 2 end by using wall pressure specification but in-spite of giving different inputs to the 2 noise sources they are producing same output . How can I give different inputs to the two sources. |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem when imported geometry from 3D CAD to star ccm, | TAREK GANAT | STAR-CCM+ | 1 | May 21, 2013 22:15 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
error in star ccm | maurizio | Siemens | 3 | October 16, 2007 05:17 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |