[hridu]

Hello....
im using this REEF3D cfd.
i simulate a 2D floating body.
and my X 11 1 0 1 0 1 0
After the simulation i didnt get the REEF3D_SOLID.vtp)
i opened the .pvtu file in paraview.
i didnt get the floating solid to see the simulation in the paraview.
where is the location of this solid?
how can i add the solid to the numerical wave tank i created..
im attaching control.txt and ctrl.txt and also the screen shot of the simulated results....

please help me to see the solid in numerical wave tank........

[kamath]

X 10 1 needs to be active. You seem to have a small letter for this command, so it is not active

[hridu]

Originally Posted by kamath

X 10 1 needs to be active. You seem to have a small letter for this command, so it is not active

I solved the issue sir,
thank you....

[TrungPham]

Hello....
I am using this REEF3D cfd.
I simulate a 2D floating body. The spatial domain of the numerical wave tank (NWT) is 10m long and 1.8m high. The water depth is d=1.22m and the water is initially still. The density of the water is ρ=1000kg/m3.
The body is a horizontal circular cylinder with a radius r=0.0762m and half of water density, ρ=500kg/m3. The cylinder is partially submerged with its centroid at h1=0.02454m above the free surface.
[ATTACH]95832[/ATTACHCapture.JPG

ctrl.txt

control.txt]
Could you help me to solve this error!
Thank you ever so much

[hridu]

Originally Posted by TrungPham

Hello....
I am using this REEF3D cfd.
I simulate a 2D floating body. The spatial domain of the numerical wave tank (NWT) is 10m long and 1.8m high. The water depth is d=1.22m and the water is initially still. The density of the water is ρ=1000kg/m3.
The body is a horizontal circular cylinder with a radius r=0.0762m and half of water density, ρ=500kg/m3. The cylinder is partially submerged with its centroid at h1=0.02454m above the free surface.
[ATTACH]95832[/ATTACHAttachment 95832

Attachment 95833

Attachment 95834]
Could you help me to solve this error!
Thank you ever so much

Delete the comments( // ) in your ctrl.txt and control.txt...

[TrungPham]

Originally Posted by kamath

X 10 1 needs to be active. You seem to have a small letter for this command, so it is not active

Hi Kamath,
I am currently working on a simulation of a cylinder using REEF3D, as detailed in your paper titled "Simulation of floating bodies using a combined immersed boundary with the level set method in REEF3D".
I had to use some small letters for this command (replace X by x in 6DOF functions) to run successfuly. Can you show me more detail about this?
Thank you very much

control.txt

ctrl.txt

[soydana]

Originally Posted by hridu

Hello....
im using this REEF3D cfd.
i simulate a 2D floating body.
and my X 11 1 0 1 0 1 0
After the simulation i didnt get the REEF3D_SOLID.vtp)
i opened the .pvtu file in paraview.
i didnt get the floating solid to see the simulation in the paraview.
where is the location of this solid?
how can i add the solid to the numerical wave tank i created..
im attaching control.txt and ctrl.txt and also the screen shot of the simulated results....

please help me to see the solid in numerical wave tank........

X commands should be capital letters. Also, you should delete the X 50 command which stands for STL output instead of VTP. And don't forget to define
X 11 1 0 1 0 1 0 in the ctrl file .

[hridu]

Originally Posted by soydana

X commands should be capital letters. Also, you should delete the X 50 command which stands for STL output instead of VTP. And don't forget to define
X 11 1 0 1 0 1 0 in the ctrl file .

thanks for your response..............

[TrungPham]

Originally Posted by soydana

X commands should be capital letters. Also, you should delete the X 50 command which stands for STL output instead of VTP. And don't forget to define
X 11 1 0 1 0 1 0 in the ctrl file .

Thanks for your response.
If I active X 10 command, this error appears (attachment picture) while using x 10 it is OK to run. Kindly guide me in rectifying them?
Best regards
control.txt

ctrl.txt

Capital letters.JPG

[TrungPham]

Originally Posted by hridu

Hello....
im using this REEF3D cfd.
i simulate a 2D floating body.
and my X 11 1 0 1 0 1 0
After the simulation i didnt get the REEF3D_SOLID.vtp)
i opened the .pvtu file in paraview.
i didnt get the floating solid to see the simulation in the paraview.
where is the location of this solid?
how can i add the solid to the numerical wave tank i created..
im attaching control.txt and ctrl.txt and also the screen shot of the simulated results....

please help me to see the solid in numerical wave tank........

Hi Hridu,
I am also having this problem. Have you seen the simulated floating body in the paraview yet?
Best regards

[TrungPham]

Originally Posted by TrungPham

Hi Hridu,
I am also having this problem. Have you seen the simulated floating body in the paraview yet?
Best regards

Hello Hridu,
You need to use the S 32 command in the control file to get the REEF3D_solid.vtp
Of course, you can also use the stl file in "REEF3D_CFD_6DOF_STL" folder to see the position of floating body in Paraview.
Regards

[TrungPham]

Originally Posted by soydana

X commands should be capital letters. Also, you should delete the X 50 command which stands for STL output instead of VTP. And don't forget to define
X 11 1 0 1 0 1 0 in the ctrl file .

Dear Sir,
I would like to attach here my control.txt and ctrl.txt file. Why don't I see the movement of the floating body in Paraview although I have use the command X 11 1 1 1 0 0 0 ? Thank you very much.
Best regardsctrl.txt

control.txt