Viewing results of chtMultiRegion in paraFoam

Scot · April 22, 2011, 16:06

I've run all the tutorials in both chtMultiRegion and chtMultiRegionSimple. They run fine. But when I try to view results using paraFoam, I am not able to see fields such as Temperature at any time after zero. I have used paraFoam to view results of other solvers without a problem. Help!

MartinB · April 22, 2011, 16:52

Hi Scot,

you can start paraFoam with option "-region leftSolid" (or whatever your region name is), and you can load the other regions with "File->Open" and selecting "multiRegionHeater{bottomAir}.OpenFOAM" etc.

Martin

Scot · April 22, 2011, 17:29

Prima! Vielen Dank, Martin- Scot

April 22, 2011, 16:06	Viewing results of chtMultiRegion in paraFoam	#1
Scot New Member Scot Johnson Join Date: Mar 2011 Posts: 25 Rep Power: 15	I've run all the tutorials in both chtMultiRegion and chtMultiRegionSimple. They run fine. But when I try to view results using paraFoam, I am not able to see fields such as Temperature at any time after zero. I have used paraFoam to view results of other solvers without a problem. Help!

April 22, 2011, 16:52		#2
MartinB Senior Member Martin Join Date: Oct 2009 Location: Aachen, Germany Posts: 255 Rep Power: 22	Hi Scot, you can start paraFoam with option "-region leftSolid" (or whatever your region name is), and you can load the other regions with "File->Open" and selecting "multiRegionHeater{bottomAir}.OpenFOAM" etc. Martin Voulet likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] paraFoam, problem loading 'volume fields'	bigphil	ParaView	0	April 29, 2009 10:36
[OpenFOAM] ParaFoam out of date libraries	melanie	ParaView	1	September 9, 2008 06:45
[OpenFOAM] Parafoam basic questions	qtian	ParaView	0	July 20, 2007 12:52
[OpenFOAM] Why dosnbt it work on paraview when inputing the results of the case tutorialsstr	dandes	ParaView	3	March 22, 2006 12:06
Circular miniFlume experimental amp numerical results	amelia	OpenFOAM Running, Solving & CFD	11	September 4, 2005 23:42

April 22, 2011, 17:29		#3
Scot New Member Scot Johnson Join Date: Mar 2011 Posts: 25 Rep Power: 15	Prima! Vielen Dank, Martin- Scot