Droplet impact using interIsoFoam

DanielRodrigues · July 20, 2020, 15:11

Hello everyone,

I am currently simulating droplet impact onto thin liquid films using interIsoFoam with dynamic mesh refinement. However, i am not able to capture the crown formation after impact, and I've tried changing the courant number and the dynamic mesh refinement levels, having no success. Attached to these files are images of the experimental and numerical cases for the same impact conditions. I have tried changing some fvSchemes dicretization methods, but also with no significant change. I also tried to change the reconstruction method (gridAlpha, isoAlpha, plicRDF) but, for the current simulation state, it is also not possible to notice the impact of these methods, since the crown does not develop.

What could I adapt in the solver or in the current simulation to improve my results?

Anik122 · August 31, 2020, 19:44

Taking the Mesh carefully and calculate all the parameters

XinXin · June 14, 2021, 07:32

Hi Daniel, have you solved this problem? you use the interIsoFoam with dynamic refinemesh to caputre the phase interface during the calculating, do you revise the interIsoFoam solver? and if you try the interFoam with dynamic refinemesh, can the solver to able to capture the crown formation after impact ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simulation of charge redistribution of a droplet due to impact on solid	multiphaser	Main CFD Forum	0	October 5, 2016 05:04
droplet impact on a dry surface.... VOF again	rogerspass	FLUENT	1	June 27, 2016 03:12
Using Fluent to simulate droplet impact	Jay	FLUENT	4	May 27, 2016 01:08
droplet impact on solid surface with VOF (fluent)	toufik08	FLUENT	0	May 27, 2016 00:54
VOF simulation with Fluent for a droplet impact with a particle	Hossein1	FLUENT	0	January 17, 2016 00:08

August 31, 2020, 19:44		#2
Anik122 New Member Anik Sarker Join Date: Oct 2017 Location: Dhaka, Bangladesh Posts: 8 Rep Power: 9	Taking the Mesh carefully and calculate all the parameters

June 14, 2021, 07:32		#3
XinXin New Member XinZhou Join Date: Apr 2018 Posts: 11 Rep Power: 8	Hi Daniel, have you solved this problem? you use the interIsoFoam with dynamic refinemesh to caputre the phase interface during the calculating, do you revise the interIsoFoam solver? and if you try the interFoam with dynamic refinemesh, can the solver to able to capture the crown formation after impact ?