LTSInterfoam-Setting Fields

Dr.Faustus · July 30, 2012, 05:04

Hi to everybody... i'm founding some difficulties to find documentation about setFieldsDict for LTSInterFoam... in particular i've to set the vof value at a certain height above the bottom...
I've tried to write setFiledDict as the file posted... with 2 zones corresponding to values 1 and 0 of alpha1... but when launching LTSInterFoam te following errors comes out:

Code:

--> FOAM FATAL IO ERROR: 
size 15000 is not equal to the given value of 706530

file: /media/04095B560627AED8/tutorial_foam/wigley2/0/alpha1 from line 18 to line 15349.

    From function Field<Type>::Field(const word& keyword, const dictionary&, const label)
    in file /home/opencfd/OpenFOAM/OpenFOAM-2.1.1/src/OpenFOAM/lnInclude/Field.C at line 236.

any idea?
Thanks

Bernhard · July 30, 2012, 05:20

Probably the 0/alpha1 file is already set for a different mesh. Try this with an unset alpha1 file (that is, no lists). If you then run setFields -time 0, it will probably work.

Dr.Faustus · July 30, 2012, 06:05

Ok,i've found the mistake
i had runned the setFields before coping the mesh...
Thanks

P:s.
i've edited the setFieldsDict as posted, seems to work better..

July 30, 2012, 05:20		#2
Bernhard Senior Member Bernhard Join Date: Sep 2009 Location: Delft Posts: 790 Rep Power: 22	Probably the 0/alpha1 file is already set for a different mesh. Try this with an unset alpha1 file (that is, no lists). If you then run setFields -time 0, it will probably work. Dr.Faustus likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Missing fields in reconstructPar	flowris	OpenFOAM	1	July 9, 2010 03:48
Cells with t below lower limit	Purushothama	Siemens	2	May 31, 2010 22:58
PostChannel	maka	OpenFOAM Post-Processing	5	July 22, 2009 10:15
Ultra high temperature?	bk	Siemens	2	July 19, 2005 01:01
Warning 097-	AB	Siemens	6	November 15, 2004 05:41