[mgharaati]

Dear all

I tried to use sclsVOFFoamsf solver but after

wmake

I have faced with this error.

error: immiscibleIncompressibleTwoPhaseMixture.H: No such file or directory

By opening this path

\opt\openfoam-2.3.0\src\transportmodels

I found there isn't any

immiscibleIncompressibleTwoPhaseMixture.H

there. would you please help me to fix the problem? Should I reinstall openFOAM again or change the version?

thanks for helping me.

Best,
Masoumeh

[spitchers]

At a first glance... copy the immiscibleIncompressibleTwoPhaseMixture.H into your solver file.

It fixed a recent problem for me. I have no idea why this worked as I'm new to C++. I believe that it is not linked to your library's in the make options file.


Sent from my iPhone using CFD Online Forum mobile app

[mgharaati]

Originally Posted by spitchers

At a first glance... copy the immiscibleIncompressibleTwoPhaseMixture.H into your solver file.

It fixed a recent problem for me. I have no idea why this worked as I'm new to C++. I believe that it is not linked to your library's in the make options file.


Sent from my iPhone using CFD Online Forum mobile app

May I ask you how can I copy this file? I don't have this file at all.

[spitchers]

The file you need is located in : OpenFOAM/src/transportModels


Sent from my iPhone using CFD Online Forum mobile app

[mgharaati]

Originally Posted by spitchers

The file you need is located in : OpenFOAM/src/transportModels


Sent from my iPhone using CFD Online Forum mobile app

U said that I don't have thid file at all. I went to the link but it 's not there.

[spitchers]

Well in that case you need to download it. But it would be there unless you removed it ?


Sent from my iPhone using CFD Online Forum mobile app

[mgharaati]

Originally Posted by spitchers

Well in that case you need to download it. But it would be there unless you removed it ?


Sent from my iPhone using CFD Online Forum mobile app

How can I downlod this? No, I didn't remove that.

[spitchers]

It comes with every OpenFOAM source pack. I would recommend you uninstall OpenFOAM and reinstall it under proper guidelines. If that file is missing, who knows what else is missing. What operating system do you operate from?


Sent from my iPhone using CFD Online Forum mobile app

[alexeym]

Hi all,

@mgharaati

There is no such header in 2.3.0. In the report (http://www.tfd.chalmers.se/~hani/kur...ankarMenon.pdf) it is specifically mentioned, that solver is developed for version 2.3.x.

[mgharaati]

Originally Posted by alexeym

Hi all,

@mgharaati

There is no such header in 2.3.0. In the report (http://www.tfd.chalmers.se/~hani/kur...ankarMenon.pdf) it is specifically mentioned, that solver is developed for version 2.3.x.

Thank you so much. Now, I 'm using OpenFoam4.1.

[saatt]

hi, how do I change the code of sclsVOFFoamsf in of-3.1? There are so many problems when I try to do this! Please give me some suggestions!

[alexeym]

Hi,

@saatt

You start by posting your problems.

Otherwise you have to wait for 1) person you want to build sclsVOFFoamsf, 2) want to build sclsVOFFoamsf using OF-3.1 as an installation environment (also maybe it would be nice if you post version number, which exists), 3) encounters the same problems, 4) want to share with you the way he solved these problems.

1 is probable, 2, 3, and especially 4 is not very likely.

[saatt]

Thank alexeym!
I am so sorry for the question that is too stupid. There are the details of the problem below.
I have changed some codes from of2.3 to of3.0.1. But there also be some debugs. Please tell me how to fix them !!!

/home/y/OpenFOAM/OpenFOAM-3.0.1/src/fvOptions/lnInclude/createFvOptions.H: In function ‘int main(int, char**)’:
/home/y/OpenFOAM/OpenFOAM-3.0.1/src/fvOptions/lnInclude/createFvOptions.H:1:32: error: redeclaration of ‘Foam::fv::IOoptionList fvOptions’
fv::IOoptionList fvOptions(mesh);
^
In file included from sclsVOFFoam.C:70:0:
createFields.H:219:22: error: ‘Foam::fv::IOoptionList fvOptions’ previously declared here
fv::IOoptionList fvOptions(mesh);
^
In file included from sclsVOFFoam.C:73:0:
correctPhi.H:16:9: error: ‘pcorrTypes’ was not declared in this scope
pcorrTypes
^
In file included from sclsVOFFoam.C:143:0:
pEqn.H:15:15: error: ‘class Foam::fv::IOoptionList’ has no member named ‘makeRelative’
fvOptions.makeRelative(phiHbyA);
^
pEqn.H:34:23: error: ‘class Foam::fv::IOoptionList’ has no member named ‘relative’
- fvOptions.relative(mesh.Sf().boundaryField() & U.boundaryField())

[alexeym]

Error messages are rather clear, no?

1. You should not create fvOptions in createFields.H if you include createFvOptions.H.
2. There is no makeRelative in fvOptions any more, so, remove these pieces.
3. Take correctPhi.H from 3.0.1's interFoam.

Since certain errors are specific to the code and

I have changed some codes from of2.3 to of3.0.1.

You can either post your code modifications (ideally create public repository with code adapted for 3.0.x), so people can comment directly there; or try to discuss your modifications and original code here.

[saatt]

Hi alexeym！
Thanks for detailed reply.
I have changed the codes according to your suggestions. And the above problems were solved. However, there are some other error messages when I complided the codes(wmake libso). The error messages are in below.
y:~/OpenFOAM/yy-3.0.1/applications/solvers/multiphase/interFoam/sclsVOFFoam$ wmake libso
Making dependency list for source file sclsVOFFoam.C
g++ -m64 -Dlinux64 -DWM_ARCH_OPTION=64 -DWM_DP -DWM_LABEL_SIZE=32 -Wall -Wextra -Wold-style-cast -Wnon-virtual-dtor -Wno-unused-parameter -Wno-invalid-offsetof -O3 -DNoRepository -ftemplate-depth-100 -I/home/yy/OpenFOAM/OpenFOAM-3.0.1/src/transportModels/twoPhaseMixture/lnInclude -I/home/yy/OpenFOAM/OpenFOAM-3.0.1/src/transportModels -I/home/yy/OpenFOAM/OpenFOAM-3.0.1/src/transportModels/incompressible/lnInclude -I/home/yy/OpenFOAM/OpenFOAM-3.0.1/src/transportModels/interfaceProperties/lnInclude -I/home/yy...(line truncated)...
g++ -m64 -Dlinux64 -DWM_ARCH_OPTION=64 -DWM_DP -DWM_LABEL_SIZE=32 -Wall -Wextra -Wold-style-cast -Wnon-virtual-dtor -Wno-unused-parameter -Wno-invalid-offsetof -O3 -DNoRepository -ftemplate-depth-100 -I/home/yy/OpenFOAM/OpenFOAM-3.0.1/src/transportModels/twoPhaseMixture/lnInclude -I/home/yy/OpenFOAM/OpenFOAM-3.0.1/src/transportModels -I/home/yy/OpenFOAM/OpenFOAM-3.0.1/src/transportModels/incompressible/lnInclude -I/home/yy/OpenFOAM/OpenFOAM-3.0.1/src/transportModels/interfaceProperties/lnInclude -I/home/yy...(line truncated)...

And this is the address of the code repository (https://github.com/saatt/sclsVOFFoam), please give me some advices one more again!
Thank you very much!!!

[alexeym]

I do not see the error (even in https://raw.githubusercontent.com/sa...rror%20message). Except you are trying to build executable using command "wmake libso" (well, it is not quite an error, your can use any fancy command you like), so instead of executable wmake produced libNULL.so, because it can not find a name of library you are trying to build. What is wrong with just "wmake"?

[saatt]

Yes, it may not be a real error, but I don't understand the message of 'libNULL.so'. Is should the sclsVOFFoam.so when I compiled the code according to the Make/files?

[alexeym]

It should be just sclsVOFFoam.

[saatt]

Thank you for your help!
The codes have complied well when I run wmake.
And I know the different orders of wmake and wmake libso.
Thank you again, alexeym!

https://github.com/saatt/sclsVOFFoam

[rasool_soofi]

Hi all,
I've compiled it on OpenFOAM 2.4.0 and it works.
Rasoul