Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Programming & Development

[Contribution] Implementation of three turbulence models in openFoam

Updated Threads

Like Tree

5Likes

5 Post By Ardali

Reply

Search this Thread

August 25, 2015, 04:23	[Contribution] Implementation of three turbulence models in openFoam	#1
Ardali Member Ardalan Join Date: Jul 2012 Location: Atlanta, USA Posts: 77 Rep Power: 14	Hi Foamers, One of our master students implemented three nice RANS models in OF2.2x. It works for later versions as well. Explicit Algebraic Reynolds stress model, two versions: Wallin-Johansson and Menter Formulation Chien Low Reynolds kEpsilon, Davidson v2f http://www.tfd.chalmers.se/~lada/pos...s/openfoam.tar For more info see the Thesis as well: http://www.tfd.chalmers.se/~lada/pos...esis-manan.pdf Good luck Ardalan snak, aerospaceman, abe and 2 others like this.

Reply

Tags

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Use of two different turbulence models at the same simulation	agustinvo	OpenFOAM Running, Solving & CFD	4	January 28, 2022 03:25
in k-epsilon wall function approach high Re turbulence models: question of velocity	romant	OpenFOAM Programming & Development	6	May 26, 2016 10:14
boundaryFoam, axisymmetry and turbulence models	thomas_toulorge	OpenFOAM Running, Solving & CFD	0	May 12, 2011 14:05
KOmega Turbulence model from wwwopenFOAMWikinet	philippose	OpenFOAM Running, Solving & CFD	30	August 4, 2010 11:26
Does there any original reference for the turbulence models in OpenFOAM	andycong	OpenFOAM Running, Solving & CFD	0	March 1, 2006 03:07

All times are GMT -4. The time now is 03:00.