|
[Sponsors] |
reconstructPar crashes with unknow patchfield type |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 3, 2020, 14:30 |
reconstructPar crashes with unknow patchfield type
|
#1 |
New Member
Jeff Stout
Join Date: Dec 2019
Posts: 8
Rep Power: 6 |
Ok, I downloaded mingw version of v1912 of OpenFoam from:
https://sourceforge.net/projects/ope...r.exe/download So I copied two tutorial projects (propeller, rotatingFanInRoom) to the home directory and ran the "Allrun" scripts. But both scripts crashed when executing reconstructPar with the following error: rotatingFanInRoom: --> FOAM FATAL IO ERROR: Unknown patchField type kqRWallFunction for patch type wall or propeller: --> FOAM FATAL IO ERROR: Unknown patchField type epsilonWallFunction for patch type wall then it prints out the acceptable patchfield types: Valid patchField types : 71 ( advective calculated codedFixedValue codedMixed cyclic cyclicACMI cyclicAMI cyclicSlip directionMixed empty exprFixedValue exprMixed extrapolatedCalculated fan fanPressure fixedFluxExtrapolatedPressure fixedFluxPressure fixedGradient fixedInternalValue fixedJump fixedJumpAMI fixedMean fixedMeanOutletInlet fixedPressureCompressibleDensity fixedProfile fixedValue freestream freestreamPressure inletOutlet inletOutletTotalTemperature interfaceCompression mapped mappedField mappedFixedInternalValue mappedFixedPushedInternalValue mixed nonuniformTransformCyclic outletInlet outletMappedUniformInlet partialSlip phaseHydrostaticPressure plenumPressure prghPressure prghTotalHydrostaticPressure prghTotalPressure processor processorCyclic rotatingTotalPressure scaledFixedValue sliced slip symmetry symmetryPlane syringePressure timeVaryingMappedFixedValue totalPressure totalTemperature turbulentInlet turbulentIntensityKineticEnergyInlet uniformDensityHydrostaticPressure uniformFixedGradient uniformFixedValue uniformInletOutlet uniformJump uniformJumpAMI uniformTotalPressure variableHeightFlowRate waveSurfacePressure waveTransmissive wedge zeroGradient ) So yeah, those patchfield types are not in the list. How come an example from the same download doesn't work? I'm running this on Windows 7 machine. |
|
March 3, 2020, 15:07 |
|
#2 |
New Member
Akash Patel
Join Date: Dec 2018
Location: Champaign, IL, USA
Posts: 20
Rep Power: 7 |
Did you try "Allrun.pre" script?
__________________
We are developing an open-source software for constructing reduced order models for your CFD simulations in OpenFOAM that runs several magnitude faster. Visit the link below to learn more. AccelerateCFD - OpenFOAM based reduced order model solver for CFD using Proper Orthogonal Decomposition. |
|
March 3, 2020, 17:01 |
|
#3 |
Senior Member
matej forman
Join Date: Mar 2009
Location: Brno, Czech Republic
Posts: 182
Rep Power: 17 |
This is strange and will be linked probably to the cross compilation. Can you please go to develop.openfoam.com and report new issue? The cross compilation needs to be checked.
|
|
March 4, 2020, 11:15 |
|
#4 |
New Member
Jeff Stout
Join Date: Dec 2019
Posts: 8
Rep Power: 6 |
The Allrun script has a call to Allrun.pre.
#!/bin/sh cd "${0%/*}" || exit # Run from this directory . ${WM_PROJECT_DIR:?}/bin/tools/RunFunctions # Tutorial run functions #------------------------------------------------------------------------------ ./Allrun.pre runApplication decomposePar runParallel $(getApplication) runApplication reconstructPar #------------------------------------------------------------------------------ |
|
March 5, 2020, 14:19 |
|
#5 |
Senior Member
Adhiraj
Join Date: Sep 2010
Location: Karnataka, India
Posts: 187
Rep Power: 16 |
Is it possible that the library that contains the wall functions is not loaded when you launch reconstructPar?
In that case maybe including the library in the system/controlDict file might work. In my version, the required library can be added like this: Code:
libs ( "libturbulenceModels.so" ); |
|
May 22, 2020, 06:00 |
|
#6 | |
New Member
Tim Taylor
Join Date: May 2020
Posts: 2
Rep Power: 0 |
has anyone found a fix for this problem? I am using the same Mingw v1912 on Win10 x64.
i am trying to run a buoyantPimpleFoam solver after using decomposePar. The simulation runs fine, but when i try to reconstructPar it shows a similar error message: Quote:
|
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FOAM FATAL ERROR: Maximum number of iterations exceeded: 100 | antoniomollo | OpenFOAM Running, Solving & CFD | 5 | March 2, 2023 06:13 |
reactingMultiphaseEulerFoam | tonnykz | OpenFOAM Running, Solving & CFD | 2 | June 15, 2020 02:09 |
time step continuity problem in VAWT simulation | lpz_michele | OpenFOAM Running, Solving & CFD | 5 | February 22, 2018 19:50 |
Inlet patch problems | martyn88 | OpenFOAM Running, Solving & CFD | 6 | April 21, 2017 18:34 |
Modified pimpleFoam solver to MRFPimpleFoam solver | hiuluom | OpenFOAM Programming & Development | 12 | June 14, 2015 21:22 |