 |
 |
 |
|
|
|
[Sponsors] | ||||
CFD with OpenFOAM course provided by Technical Courses |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 30, 2014, 05:14
|
CFD with OpenFOAM course provided by Technical Courses
|
#1 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13  |
This is Carlos Rodriguez, co-teacher of the CFD with OpenFOAM online course.
A new edition of this course will start on 12th June 2014 You can consult the following link for further information: http://www.technicalcourses.net/port...php?curso_id=8 If you are interested in the course, you can register at our webpage or send us an e-mail. Please, feel free to contact us if you have any question. Best regards Carlos Rodríguez |
|
|
|
|
|
June 4, 2014, 05:22
|
Has anyone tried? - CFD with OpenFOAM course provided by Technical Courses
|
#2 |
|
New Member
Karol Necel
Join Date: Nov 2011
Posts: 2
Rep Power: 0 |
I was wondering if anyone has taken this course and could share his/her opinion on it?
There has been a thread here where some doubts have been raised, so I was wandering if it is what it is said to be. Thanks for any input! Regards |
|
|
|
|
|
|
June 4, 2014, 08:33
|
|
#3 |
|
Senior Member
ok
Join Date: Oct 2013
Posts: 346
Rep Power: 14 |
Dear Karol,
I really recommended you to attend that online course. I had been taken that course 4 months ago. It was really useful and teachers were helpful as well. Even I already finished that course and got the Diploma, I'm still contacting teachers and they answer every single question that I had. As you are being beginner in OpenFOAM so that course will be really helpful to understand OpenFOAM environment. All the best. Maimouna |
|
|
|
|
|
|
June 8, 2014, 05:07
|
|
#4 |
|
New Member
Karol Necel
Join Date: Nov 2011
Posts: 2
Rep Power: 0 |
Thanks, Maimouna, for your input
|
|
|
|
|
|
|
August 22, 2014, 11:45
|
New edition of OpenFOAM online course on 26th September 2014
|
#5 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
This is Carlos Rodriguez, co-teacher of the OpenFOAM online course.
A new edition of this course will start on 26th September 2014 You can consult the following link for further information: http://www.technicalcourses.net/port...php?curso_id=8 Best regards |
|
|
|
|
|
|
December 1, 2014, 08:54
|
CFD with OpenFOAM
|
#6 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
New online courses: CFD with OpenFOAM (English languaje);
CFD with OpenFOAM, 50 hours (start on 16th Janauary 2015): http://www.technicalcourses.net/port...php?curso_id=8 We also offer a C++ applied to OpenFOAM online course for people which knowledge in OpenFOAM (start on 19th December 2014) http://www.technicalcourses.net/port...hp?curso_id=15 Regards Last edited by carlosrv27; December 7, 2014 at 06:30. |
|
|
|
|
|
|
January 3, 2015, 10:30
|
Next Course CFD with OpenFOAM, starts 16th January
|
#7 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
CFD with OpenFOAM course, 50 hours, online!
This course has been entirely developed by Technical Courses, students will require approximately 50 hours to acquire a basic-intermediate OpenFOAM level and obtain a certificate diploma. Nevertheless, additional material is provided for students who want to spend more than 50 hours and acquire a higher level. The maximum time to complete the course is 2 months. Link: http://www.technicalcourses.net/port...php?curso_id=8 |
|
|
|
|
|
|
January 7, 2015, 05:12
|
|
#8 |
|
Senior Member
|
Dear Carlos,
I am interested to join the 2nd course C++ applied to OpenFOAM online course http://www.technicalcourses.net/port...hp?curso_id=15 can you give an outlook for 2015 what dates your courses are planned to start? |
|
|
|
|
|
|
January 8, 2015, 04:29
|
next edition of C++ applied to OpenFOAM online course
|
#9 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
Dear Elvis,
The next edition of C++ applied to OpenFOAM online course will take place in March or April. This course is aimed at people with some previous knowledge of OpenFOAM. |
|
|
|
|
|
|
January 23, 2015, 07:49
|
CFD with OpenFOAM online course
|
#10 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
Dear everybody,
I am one of the teachers of these two interesting courses at a very competitive prices: CFD with OpenFOAM online course, aimed at people without any previous OpenFOAM knowledge: http://www.technicalcourses.net/port...php?curso_id=8 C++ applied to OpenFOAM online course, aimed at people with previous OpenFOAM knowledge: http://www.technicalcourses.net/port...hp?curso_id=15 |
|
|
|
|
|
|
March 29, 2015, 11:33
|
CFD with OpenFOAM online course, 17th April 2015
|
#11 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
Dear everybody,
CFD with OpenFOAM online course, starts on 17th April This course is aimed at people without any previous OpenFOAM knowledge: http://www.technicalcourses.net/port...php?curso_id=8 If you are interested in the course, you can register at our webpage or send us an e-mail. Please, feel free to contact us if you have any question. Best regards Carlos Rodríguez Last edited by carlosrv27; April 7, 2015 at 16:46. |
|
|
|
|
|
|
April 7, 2015, 16:45
|
C++ applied to OpenFOAM online course, 24th April
|
#12 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
C++ applied to OpenFOAM course, starts on 24th April
Link: http://www.technicalcourses.net/port...hp?curso_id=15 This course is aimed at people who want to understand and make modifications to C++ features in OpenFOAM. Regarding C++, any previous knowledge is not necesary to follow the course. Students who do not have any previous knowledge in C++ will receive material extra to acquire an elemental level to start this course. Regarding OpenFOAM, it is necessary a basic knowledge of the software. For people who do not have any previous knowledge in OpenFOAM, it is recommended to follow first the course CFD with OpenFOAM, also available at Technical Courses If you are interested in the course, you can register at our webpage or send us an e-mail. (http://www.technicalcourses.net) Please, feel free to contact us if you have any question. Best regards Carlos Rodríguez |
|
|
|
|
|
|
May 26, 2015, 18:50
|
Meshing and Post-processing with SALOME Course
|
#13 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
SALOME online course is aimed at meshing and Post-processing. The content of the course is 25 hours, and the maximum time to complete it is 4 weeks.
Start date is on 20th June 2015 and price is 200€ Link to the course: http://www.technicalcourses.net/port...hp?curso_id=23 |
|
|
|
|
|
|
May 30, 2015, 04:16
|
CFD with OpenFOAM course, 25th june 2015
|
#14 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
Dear everybody,
CFD with OpenFOAM course, 25th june 2015. This course require 50 hours to acquire a basic-intermediate OpenFOAM level and obtain a certificate diploma: http://www.technicalcourses.net/port...php?curso_id=8 If you are interested in the course, you can register at our webpage or send us an e-mail. Please, feel free to contact us if you have any question. Best regards Carlos Rodríguez |
|
|
|
|
|
|
September 3, 2015, 09:00
|
FD with OpenFOAM course, 18th September 2015.
|
#15 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
CFD with OpenFOAM course, 18th September 2015.
This course require 50 hours to acquire a basic-intermediate OpenFOAM level and obtain a certificate diploma: http://www.technicalcourses.net/port...php?curso_id=8 If you are interested in the course, you can register at our webpage or send us an e-mail. Please, feel free to contact us if you have any question. Best regards Carlos Rodríguez |
|
|
|
|
|
|
September 21, 2015, 17:17
|
Meshing and Post-processing with SALOME course
|
#16 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
Meshing and Post-processing with SALOME online course. The content of the course is 25 hours, and the maximum time to complete it is 4 weeks.
Start date is on 30th Sept. 2015 and price is 200€ Link to the course: http://www.technicalcourses.net/port...hp?curso_id=23 |
|
|
|
|
|
|
September 22, 2015, 12:12
|
C++ applied to OpenFOAM course (5th October)
|
#17 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
C++ applied to OpenFOAM course
Link: http://www.technicalcourses.net/port...hp?curso_id=15 Start date is on 5th October 2015 and price is 200€ This course is aimed at people who want to understand and make modifications to C++ features in OpenFOAM. Regarding C++, any previous knowledge is not necesary to follow the course. Students who do not have any previous knowledge in C++ will receive material extra to acquire an elemental level to start this course. Regarding OpenFOAM, it is necessary a basic knowledge of the software. For people who do not have any previous knowledge in OpenFOAM, it is recommended to follow first the course CFD with OpenFOAM, also available at Technical Courses If you are interested in the course, you can register at our webpage or send us an e-mail. (http://www.technicalcourses.net) Please, feel free to contact us if you have any question. |
|
|
|
|
|
|
October 29, 2015, 04:14
|
CFD with OpenFOAM online training (20th Nov. 2015)
|
#18 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
CFD with OpenFOAM course, 20th November 2015.
This course require 50 hours to acquire a basic-intermediate OpenFOAM level and obtain a certificate diploma: http://www.technicalcourses.net/port...php?curso_id=8 If you are interested in the course, you can register at our webpage or send us an e-mail. Please, feel free to contact us if you have any question. Best regards Carlos Rodríguez |
|
|
|
|
|
|
February 1, 2016, 07:24
|
CFD with OpenFOAM course, 50 hours online, 27th February 2016
|
#19 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
CFD with OpenFOAM course, 50 hours online, 27th Feb. 2016, price is 400€
Students will require approximately 50 hours to acquire a intermediate OpenFOAM level and obtain a certificate diploma. Nevertheless, additional material is provided for students who want to spend more than 50 hours and acquire a higher level. The course is structured as follows: - 11 theoretical chapters (each chapter includes a text and a videolesson) - 8 basic exercises (each exercise includes a text and a videotutorial) - 7 intermediate exercises (each exercise includes a text and a videotutorial). The whole material (videolessons, exercises and texts) is available from the first day and there is no schedule. Videolessons are recorded. This enables each student to progress according to his learning pace. More information & registration under: http://www.technicalcourses.net/port...php?curso_id=8 |
|
|
|
|
|
|
March 24, 2016, 03:36
|
C++ applied to OpenFOAM online course (Next edition 8th April 2016)
|
#20 |
|
Member
Carlos Rodríguez
Join Date: Jun 2013
Posts: 64
Rep Power: 13 |
C++ applied to OpenFOAM online course (Next edition 8th April 2016)
The content of the course is 20 hours, and the maximum time to complete it is 6 weeks. At the end of the course, an aptitude certificate will be issued to the students. This course includes manuals and exercises. The software OpenFOAM is available for free from www.openfoam.org. Our website has chat, forums, remote desktop connection, video conferencing, internal mail, etc. The teachers (M.I. Lamas and C.G. Rodriguez) have an extensive experience in CFD and OpenFOAM and papers in important international journals. More information here: C++ applied to OpenFOAM online course |
|
|
|
|
|
|
| Tags |
| online course, openfoam training, technical courses |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HELYX-OS Training: OpenFOAM and HELYX-OS for Industial CFD Applications | lr103476 | OpenFOAM Announcements from Other Sources | 0 | January 6, 2014 15:20 |
| OpenFOAM Training Courses Jan-May 2014 | opencfd | OpenFOAM Announcements from ESI-OpenCFD | 0 | December 3, 2013 20:58 |
| New OpenFOAM Forum Structure | jola | OpenFOAM | 2 | October 19, 2011 07:55 |
| Cross-compiling OpenFOAM 1.7.0 on Linux for Windows 32 and 64bits with Mingw-w64 | wyldckat | OpenFOAM Announcements from Other Sources | 3 | September 8, 2010 07:25 |
| OpenFOAM Training Courses in Germany | hjasak | OpenFOAM Announcements from Other Sources | 0 | July 23, 2009 20:34 |
1Likes
Linear Mode
