[Other] Implementing IBM on the FSI solver

Engineers · July 26, 2016, 16:05

Hello everyone,

I've been trying to implement IBM on the 'fluid' part of the FSI solver. Reviewing some older threads from 2014, I've seen that it has been done. But there are no detailed discussion or explanation of it. Does anyone have a link to a paper or presentation or such that discuss this process? Maybe an example case?

I would truly appreciate any comments and suggestions.

Regards

AH

saeed_hb · May 10, 2017, 09:58

I'm working on that too, but I need to know what changes should implemented to icoFsiFoam which can do that. I'm sure the coupling conditions should be changed on the interface that can be capable of Ib method. The dynamic mesh should change, because there is no mesh deformation in Ib method. STL file of the structure should be replaced by the structure mesh. I really need a clue or reference that can do this work...
if you know something please help me..! I really appreciate that

Engineers · May 11, 2017, 14:48

My conclusion was that the implementation of IBM to FSI is not straight forward at this point, and it would possibly require some coding. I decided to not get into the coding part at this time. Please let me know if you manage to get more info on this. Thanks.

July 26, 2016, 16:05	Implementing IBM on the FSI solver	#1
Engineers New Member Join Date: Aug 2011 Posts: 9 Rep Power: 15	Hello everyone, I've been trying to implement IBM on the 'fluid' part of the FSI solver. Reviewing some older threads from 2014, I've seen that it has been done. But there are no detailed discussion or explanation of it. Does anyone have a link to a paper or presentation or such that discuss this process? Maybe an example case? I would truly appreciate any comments and suggestions. Regards AH jennyjian likes this.

May 10, 2017, 09:58		#2
saeed_hb New Member Saeed Join Date: Oct 2016 Posts: 3 Rep Power: 10	I'm working on that too, but I need to know what changes should implemented to icoFsiFoam which can do that. I'm sure the coupling conditions should be changed on the interface that can be capable of Ib method. The dynamic mesh should change, because there is no mesh deformation in Ib method. STL file of the structure should be replaced by the structure mesh. I really need a clue or reference that can do this work... if you know something please help me..! I really appreciate that Last edited by saeed_hb; May 14, 2017 at 05:22.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compilation error for OpenFoam FSI solver with third party FEA code	danny261083	OpenFOAM Running, Solving & CFD	1	October 6, 2017 10:50
Compressible Solver Implementation in FSI Library (Foam-extend 3.2)	KarthickRajkumar	OpenFOAM Programming & Development	1	January 4, 2017 07:45
thobois class engineTopoChangerMesh error	Peter_600	OpenFOAM	4	August 2, 2014 10:52
A question on implementing the actuationDisk to the pisoFoam solver	frankyux	OpenFOAM Running, Solving & CFD	4	April 28, 2013 11:11
Working directory via command line	Luiz	CFX	4	March 6, 2011 21:02

May 11, 2017, 14:48		#3
Engineers New Member Join Date: Aug 2011 Posts: 9 Rep Power: 15	My conclusion was that the implementation of IBM to FSI is not straight forward at this point, and it would possibly require some coding. I decided to not get into the coding part at this time. Please let me know if you manage to get more info on this. Thanks.