[Other] remeshing mesh.

sharonyue · May 11, 2014, 20:53

Hi guys,

I just run into this case: https://www.youtube.com/watch?v=RXF2YoWZ-I4
Its very interesting and it used hex mesh.

Can OpenFOAM do this by hex mesh or tet?

elvis · May 12, 2014, 09:26

Hi,

yes, it can be done with OpenFOAM.
I would take a look at the OPENFOAM EXTEND
=> OpenFOAM 1.6-extend or 3.0
A good read might be http://www.tfd.chalmers.se/~hani/kur..._Corrected.pdf
or
look for the mesh motion presentations by Professor Hrv. Jasak => Openfoam Workshop material
or those movies http://powerlab.fsb.hr/ped/kturbo/OpenFOAM/movies/

http://www.tfd.chalmers.se/~hani/kur..._Corrected.pdf

May 11, 2014, 20:53	remeshing mesh.	#1
sharonyue Senior Member Dongyue Li Join Date: Jun 2012 Location: Beijing, China Posts: 849 Rep Power: 18	Hi guys, I just run into this case: https://www.youtube.com/watch?v=RXF2YoWZ-I4 Its very interesting and it used hex mesh. Can OpenFOAM do this by hex mesh or tet?

May 12, 2014, 09:26		#2
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hi, yes, it can be done with OpenFOAM. I would take a look at the OPENFOAM EXTEND => OpenFOAM 1.6-extend or 3.0 A good read might be http://www.tfd.chalmers.se/~hani/kur..._Corrected.pdf or look for the mesh motion presentations by Professor Hrv. Jasak => Openfoam Workshop material or those movies http://powerlab.fsb.hr/ped/kturbo/OpenFOAM/movies/ http://www.tfd.chalmers.se/~hani/kur..._Corrected.pdf ayhan515 and GauthierL like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
[snappyHexMesh] Creating multiple multiple cell zones with snappyHexMesh - a newbie in deep water!	divergence	OpenFOAM Meshing & Mesh Conversion	0	January 23, 2019 05:17
Dynamic Mesh: Remeshing doesn´t work properly	maccheese	Fluent Multiphase	4	June 7, 2018 06:56
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 04:52
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 22:11