[ImmersedBoundary] Immersed boundary method in OpenFoam

daihu000 · January 25, 2010, 14:26

This would be a question for the Foam developing team: I am wondering if they'll incorporate immersed boundary method (based on interpolation) into its future new release as a module to handle the dynamic mesh if they are not doing so. They seem to have this idea. I am strongly interested in this because I am working on immersed boundary method myself for PhD. If they are doing so I'd like to know what stage they are in now.

Or anybody can give some information? Thanks

pbohorquez · January 25, 2010, 14:52

Have you already read this?

http://www.openfoamworkshop.org/2009...ynamicMesh.pdf

I think that Željko Tukovíc is working on it.

daihu000 · January 25, 2010, 19:03

Quote:

Originally Posted by pbohorquez

Have you already read this?

http://www.openfoamworkshop.org/2009...ynamicMesh.pdf

I think that Željko Tukovíc is working on it.

Thanks~
not sure how far he has gone. should I expect for this in the next release 1.7 ...

pbohorquez · January 26, 2010, 05:03

As far as I know if the code is going to be released or is now available, you must look into the extension project (i.e. OF-1.5-dev). That work has not been done in the dark side.

bastil · January 26, 2010, 16:37

Quote:

Originally Posted by pbohorquez

As far as I know if the code is going to be released or is now available, you must look into the extension project (i.e. OF-1.5-dev). That work has not been done in the dark side.

I have never seen a piece of code in there so far.

Regards BastiL

elvis · April 12, 2011, 17:20

Hello,

does anybody know, if Immersed boundary method can be used right now?
the status on http://www.extend-project.de/
in development:
immersed boundary method (Uni Zagreb)
But
http://www.sfbtrr75.de/website/index...mid=30&lang=de
Dr. Tuković
- Immersed boundary method with RBF (Radial Basis Function) interpolation in Open FOAM
can somebody point me where to look for Immersed boundary method in extend?

thx

elvis

liu · April 13, 2011, 11:49

I second this.

IBM would be a great (and much needed) contribution to the OF community. It will make OF much competitive (comparing to, say, Flow3D).

JinBiao · June 23, 2014, 07:30

Hi,
I am now trying to utilize the immersed boundary method implemented by Hrvoje Jasak and Željko Tukovíc. But I got some trouble in the case of parallelization. Anyone has the same trouble as me? I tried to dig a little and find some problems in the data transfer between processors in the implementation. But I cannot find out what it exactly is.

Best regards,

miladrakhsha · September 3, 2014, 18:53

Quote:

Originally Posted by JinBiao

Hi,
I am now trying to utilize the immersed boundary method implemented by Hrvoje Jasak and Željko Tukovíc. But I got some trouble in the case of parallelization. Anyone has the same trouble as me? I tried to dig a little and find some problems in the data transfer between processors in the implementation. But I cannot find out what it exactly is.

Best regards,

I am using this implementation right now and I have the same problem in parallelization as well. Did you manage to solve the problem?

It would be great if users can share their problems and experience around this topic here. But seems that there are only a few people interested in this topic.

hua1015 · November 17, 2014, 09:50

Hi JinBiso,
I have the same problem. Have you solved this problem?

gxy200992243 · December 22, 2014, 15:50

Hi, Hua,

I think the parallelization problem is brought by collecting data from different processors, because in parallelization case, each processor can only access data in its own subdomain. You can try to add sumOp to the source code, this can help you combine the data collected by all the processors.

Best wishes,

Xiangyu

January 25, 2010, 14:26	Immersed boundary method in OpenFoam	#1
daihu000 New Member Hu Dai Join Date: Dec 2009 Location: Nashville TN Posts: 2 Rep Power: 0	This would be a question for the Foam developing team: I am wondering if they'll incorporate immersed boundary method (based on interpolation) into its future new release as a module to handle the dynamic mesh if they are not doing so. They seem to have this idea. I am strongly interested in this because I am working on immersed boundary method myself for PhD. If they are doing so I'd like to know what stage they are in now. Or anybody can give some information? Thanks

April 12, 2011, 17:20		#6
elvis Senior Member Elvis Join Date: Mar 2009 Location: Sindelfingen, Germany Posts: 620 Blog Entries: 6 Rep Power: 24	Hello, does anybody know, if Immersed boundary method can be used right now? the status on http://www.extend-project.de/ in development: immersed boundary method (Uni Zagreb) But http://www.sfbtrr75.de/website/index...mid=30&lang=de Dr. Tuković - Immersed boundary method with RBF (Radial Basis Function) interpolation in Open FOAM can somebody point me where to look for Immersed boundary method in extend? thx elvis miladrakhsha likes this.

June 23, 2014, 07:30		#8
JinBiao Member Jinbiao Xiong Join Date: Oct 2009 Location: China/Japan Posts: 50 Rep Power: 17	Hi, I am now trying to utilize the immersed boundary method implemented by Hrvoje Jasak and Željko Tukovíc. But I got some trouble in the case of parallelization. Anyone has the same trouble as me? I tried to dig a little and find some problems in the data transfer between processors in the implementation. But I cannot find out what it exactly is. Best regards, miladrakhsha likes this. __________________ Jinbiao

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 08:38
Map of the OpenFOAM Forum - Understanding where to post your questions!	wyldckat	OpenFOAM	10	September 2, 2021 06:29
[ImmersedBoundary] rotating immersed boundary at OpenFoam	RobertG	OpenFOAM Community Contributions	3	October 6, 2015 12:56
Wrong flow in ratating domain problem	Sanyo	CFX	17	August 15, 2015 07:20
[ImmersedBoundary] who has the paper about immersed boundary method in openfoam	blueshit	OpenFOAM Community Contributions	1	November 18, 2013 08:16

January 25, 2010, 14:52		#2
pbohorquez Member Patricio Bohorquez Join Date: Mar 2009 Location: Jaén, Spain Posts: 95 Rep Power: 17	Have you already read this? http://www.openfoamworkshop.org/2009...ynamicMesh.pdf I think that Željko Tukovíc is working on it.

January 26, 2010, 05:03		#4
pbohorquez Member Patricio Bohorquez Join Date: Mar 2009 Location: Jaén, Spain Posts: 95 Rep Power: 17	As far as I know if the code is going to be released or is now available, you must look into the extension project (i.e. OF-1.5-dev). That work has not been done in the dark side.

April 13, 2011, 11:49		#7
liu Senior Member Xiaofeng Liu Join Date: Mar 2009 Location: State College, PA, USA Posts: 118 Rep Power: 17	I second this. IBM would be a great (and much needed) contribution to the OF community. It will make OF much competitive (comparing to, say, Flow3D).

November 17, 2014, 09:50		#10
hua1015 Member Hua Join Date: May 2012 Posts: 31 Rep Power: 14	Hi JinBiso, I have the same problem. Have you solved this problem?

December 22, 2014, 15:50		#11
gxy200992243 New Member Xiangyu Gao Join Date: Sep 2013 Location: West Lafayette, IN, USA Posts: 29 Rep Power: 13	Hi, Hua, I think the parallelization problem is brought by collecting data from different processors, because in parallelization case, each processor can only access data in its own subdomain. You can try to add sumOp to the source code, this can help you combine the data collected by all the processors. Best wishes, Xiangyu