[swak4Foam] whats the trick to access to second layer of patch neighbors in groovyBC?

immortality · July 8, 2013, 21:49

i want to use an expression on outlet so that the pressure on the patch be to say 100000 less than internalField,
But for more smoothness its good to have access and participate second layers of neighbors in expression too.
How can do it?is it possible or not(with or without groovyBC)?

gschaider · July 9, 2013, 06:43

Quote:

Originally Posted by immortality

i want to use an expression on outlet so that the pressure on the patch be to say 100000 less than internalField,
But for more smoothness its good to have access and participate second layers of neighbors in expression too.
How can do it?is it possible or not(with or without groovyBC)?

Not possible in groovyBC. And hard to do in C++ (part of the problem is that "second layer of cells" is only well-defined for a pure hex-mesh and even then you have corner-cases ... on the corners)

immortality · July 9, 2013, 06:59

thanks.
what does "corner-cases" mean?

gschaider · July 9, 2013, 08:14

Quote:

Originally Posted by immortality

thanks.
what does "corner-cases" mean?

http://bit.ly/14FRisK

immortality · July 9, 2013, 08:58

what interesting site! google was filtered some days ago!

but I mean what corner cases may occur,in what sense?

gschaider · July 9, 2013, 11:14

Quote:

Originally Posted by immortality

what interesting site! google was filtered some days ago!

but I mean what corner cases may occur,in what sense?

Draw a regular grid with a corner (concave and convex) on a piece of paper and think what the second layer of cells is. In one case you have cells from the first layer in the second layer. In the other case there are cells missing that should have an influence. And that is an easy case

immortality · July 9, 2013, 13:01

yes you right,that issue is for one or three cell but may be somewhat hard to write a program that realizes it but I have a thesis that have done it,I'll try to do this maybe some months later(after being light my works)and share!
now I think gradientExpession "-50000" for example works fine enough(acceptable).

July 8, 2013, 21:49	whats the trick to access to second layer of patch neighbors in groovyBC?	#1
immortality Senior Member Ehsan Join Date: Oct 2012 Location: Iran Posts: 2,208 Rep Power: 27	i want to use an expression on outlet so that the pressure on the patch be to say 100000 less than internalField, But for more smoothness its good to have access and participate second layers of neighbors in expression too. How can do it?is it possible or not(with or without groovyBC)? __________________ Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked.

July 9, 2013, 06:59		#3
immortality Senior Member Ehsan Join Date: Oct 2012 Location: Iran Posts: 2,208 Rep Power: 27	thanks. what does "corner-cases" mean? __________________ Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked.

July 9, 2013, 08:58		#5
immortality Senior Member Ehsan Join Date: Oct 2012 Location: Iran Posts: 2,208 Rep Power: 27	what interesting site! google was filtered some days ago! but I mean what corner cases may occur,in what sense? __________________ Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked.

July 9, 2013, 13:01		#7
immortality Senior Member Ehsan Join Date: Oct 2012 Location: Iran Posts: 2,208 Rep Power: 27	yes you right,that issue is for one or three cell but may be somewhat hard to write a program that realizes it but I have a thesis that have done it,I'll try to do this maybe some months later(after being light my works)and share! now I think gradientExpession "-50000" for example works fine enough(acceptable). __________________ Injustice Anywhere is a Threat for Justice Everywhere.Martin Luther King. To Be or Not To Be,Thats the Question! The Only Stupid Question Is the One that Goes Unasked.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Prismatic boundary layer	KateEisenhower	enGrid	5	September 15, 2015 08:48
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 05:04
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 05:38
CheckMeshbs errors	ivanyao	OpenFOAM Running, Solving & CFD	2	March 11, 2009 03:34
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 07:51