system configuration for a specific simulation

aref_ehteshami · May 19, 2020, 09:49

Hello Friends
I want to know if my PC hardware is OK for a simulation with following details?
a 3-D in compressible flow with using turbulence model
my mesh is structure with number of about 16 million element.
i have windows 10- 64 bit OS
CPU: core i5_4460 3.2 GHz
RAM: 8 GB
and how many cores i should set in console?

flotus1 · May 19, 2020, 19:02

Your CPU has 4 cores and 4 threads. So 4 is a reasonable starting point for the amount of threads to run a simulation.
You did not mention any solver or relevant settings, but even in the best case scenario, 8GB of RAM will probably not be enough for 16 million cells.
Depending on the motherboard, it can be upgraded to up to 32 GB of RAM. Which depending on the solver might still not be enough. For example, Ansys Fluent coupled solver run in double precision requires upwards of 4GB per million cells, even for a basic single-phase turbulent flow with no additional physics.

aref_ehteshami · November 7, 2020, 04:16

Hi Dear flotus1
Sorry answering too late but your comment was useful for me, Thank you.

May 19, 2020, 09:49	system configuration for a specific simulation	#1
aref_ehteshami New Member aref Join Date: Oct 2019 Posts: 25 Rep Power: 7	Hello Friends I want to know if my PC hardware is OK for a simulation with following details? a 3-D in compressible flow with using turbulence model my mesh is structure with number of about 16 million element. i have windows 10- 64 bit OS CPU: core i5_4460 3.2 GHz RAM: 8 GB and how many cores i should set in console?

May 19, 2020, 19:02		#2
flotus1 Super Moderator Alex Join Date: Jun 2012 Location: Germany Posts: 3,427 Rep Power: 49	Your CPU has 4 cores and 4 threads. So 4 is a reasonable starting point for the amount of threads to run a simulation. You did not mention any solver or relevant settings, but even in the best case scenario, 8GB of RAM will probably not be enough for 16 million cells. Depending on the motherboard, it can be upgraded to up to 32 GB of RAM. Which depending on the solver might still not be enough. For example, Ansys Fluent coupled solver run in double precision requires upwards of 4GB per million cells, even for a basic single-phase turbulent flow with no additional physics. aref_ehteshami likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Small cluster configuration for pump simulation at CFX	Nevel	Hardware	2	April 7, 2014 07:07
Problem with Joule-Heating simulation in a high aspect-ratio system	farshadsm	Main CFD Forum	4	December 4, 2012 04:09
error message	cuteapathy	CFX	14	March 20, 2012 07:45
Best Pc Configuration for maximum simulation speed	Anastasios Georgoulas	FLUENT	2	December 18, 2008 13:34
Ideal system configuration for fluent	hari	FLUENT	0	November 8, 2007 00:17

November 7, 2020, 04:16		#3
aref_ehteshami New Member aref Join Date: Oct 2019 Posts: 25 Rep Power: 7	Hi Dear flotus1 Sorry answering too late but your comment was useful for me, Thank you.