|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Join Date: Nov 2023
Location: EU
Posts: 10
Rep Power: 2 ![]() |
What is better for CFD one CPU with 4GHZ or two CPU with 3.5GHz?
What is more important for CFD number of CPUs or clock speed? Last edited by user421; November 28, 2023 at 13:50. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
Daniel
Join Date: Nov 2023
Posts: 6
Rep Power: 2 ![]() |
I think what matters more is the memory bandwidth, that is, number of memory channels and supported RAM speed ([memory bandwidth] = 2 x [number of channels] x [RAM speed] x [bus width]). So, if we assume that CPUs in your single and dual setups have similar memory characteristics, then dual CPU would be better because it means twice as many memory channels and, thus, twice as higher memory bandwidth. But if your single CPU is, say, EPYC 9554 (bandwidth ~= 460.8 GB/s) and your dual CPUs are, for example, Xeon Platinum 8284 (bandwidth ~= 2 x 140 GB/s = 280 GB/s), then the single CPU would be better.
|
|
![]() |
![]() |
![]() |
![]() |
#3 | |
New Member
Join Date: Nov 2023
Location: EU
Posts: 10
Rep Power: 2 ![]() |
Quote:
What is better option ? 1x Intel Xeon W-2145 8-core 3.7 / 4.5 GHz, 1x Intel Xeon W-2125 4.0 GHz Quad Core, 1x Intel Xeon Gold 12-core 6136 3.0 / 3.7 GH or 2x Xeon E5-2678W v4 3.0Ghz 12 core Last edited by user421; November 29, 2023 at 05:17. |
||
![]() |
![]() |
![]() |
![]() |
#4 |
New Member
Daniel
Join Date: Nov 2023
Posts: 6
Rep Power: 2 ![]() |
1x Intel Xeon W-2145 8-core 3.7 / 4.5 GHz: 4 channels at 2666MHz -> max bandwidth = 85 GB/s
1x Intel Xeon W-2125 4.0 GHz Quad Core: 4 channels at 2666MHz -> max bandwidth = 85 GB/s 1x Intel Xeon Gold 12-core 6136 3.0 / 3.7 GH: 6 channels at 2666MHz -> max bandwidth = 128 GB/s 2x Xeon E5-2678W v4 3.0Ghz 12 core: 2 x 4 channels at 2400MHz -> max bandwidth = 154 GB/s I would personally go for the 2x Xeon E5-2678W v4 option. But perhaps more experienced users on this forum can also chime in Note that to use full memory bandwidth you will have to have the same number of RAM sticks as there are channels. So, for 2x Xeon E5-2678W v4 options you would need 8 identical memory sticks plugged in. |
|
![]() |
![]() |
![]() |
![]() |
#5 | |
New Member
Join Date: Nov 2023
Location: EU
Posts: 10
Rep Power: 2 ![]() |
Quote:
But if workstation have 16 ram slots and I plug only 8 ram sticks, there will 8 slots empty, is this problem? What happened if I plug more ram stick then CPU has channels,for example 10 or all 16 ? Do I need plug in these 8 ram sticks in every slots I wont or must be some order? Last edited by user421; November 29, 2023 at 14:54. |
||
![]() |
![]() |
![]() |
![]() |
#6 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,426
Rep Power: 49 ![]() ![]() |
Please refrain from opening new threads, if you feel like you are not getting an answer fast enough. It won't help.
We have two goals when populating memory 1) Fill all available memory channels with at least one DIMM (channels, not slots) 2) Make it a balanced configuration - i.e. identical DIMMs on each memory channnel. On a motherboard with 2 CPUs, 4 channels per CPU, and a total of 16 DIMM slots: Each memory channel has two DIMM slots associated to it. We can either use 8 or 16 identical DIMMs to achieve both goals. With 16 DIMMs it's easy. Just fill all slots. With 8 DIMMs, one slot for each memory channel needs to be populated. They are often color-coded. But you should definitely look up in the manual which slots to fill. You can't just pick either of them. Using 10 DIMMs on such a board would result in an unbalanced memory configuration. It usually works in the sense that the system POSTs, and all memory is recognized by the operating system. But if you care about memory performance (which we do for CFD) this has to be avoided. |
|
![]() |
![]() |
![]() |
![]() |
#7 | |
New Member
Join Date: Nov 2023
Location: EU
Posts: 10
Rep Power: 2 ![]() |
Quote:
If someone put 8 sticks in "wrong" slots, will Windows inform me that something is not OK? Maybe is better to buy first 8 sticks so one day If I want double RAMs than I can buy more 8 sticks.. Quote: "It is critical that all memory channels in a processor are being populated with equal amounts of memory, otherwise both memory bandwidth and performance will be significantly compromised." I was thought that number of RAM sticks must be same as CPU memory channels... What is your answer on my first post, do you agree that 2x Xeon E5-2678W v4 is the fastest option? So 8x16GB I must plug sticks at 1,5,3,7,8,4,6,2 position?They are all at side of CPU2 https://www.youtube.com/watch?v=Z_wf9sDUrTo https://www.youtube.com/watch?v=Z_wf9sDUrTo |
||
![]() |
![]() |
![]() |
![]() |
#8 | |||
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,426
Rep Power: 49 ![]() ![]() |
DIMM, memory module, RAM "stick"... all the same thing
Quote:
Quote:
Quote:
|
||||
![]() |
![]() |
![]() |
![]() |
#9 | |
New Member
Join Date: Nov 2023
Location: EU
Posts: 10
Rep Power: 2 ![]() |
Quote:
at 1:25sec https://www.youtube.com/watch?v=Z_wf9sDUrTo |
||
![]() |
![]() |
![]() |
![]() |
#10 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,426
Rep Power: 49 ![]() ![]() |
Yeah. Same information in the manual, page 68
https://h10032.www1.hp.com/ctg/Manual/c04823811.pdf |
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seakeeping Solver:Crashed | akbarbagusd | Fidelity CFD | 0 | November 5, 2021 12:42 |
Foam-Extend 4.0 simpleFoam motorbike parallel error? | EternalSeekerX | OpenFOAM Running, Solving & CFD | 0 | May 10, 2021 04:55 |
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops | avinashjagdale | OpenFOAM Meshing & Mesh Conversion | 53 | March 8, 2019 09:42 |
decomposePar -allRegions | stru | OpenFOAM Pre-Processing | 2 | August 25, 2015 03:58 |
foam-extend_3.1 decompose and pyfoam warning | shipman | OpenFOAM | 3 | July 24, 2014 08:14 |