Fluent setup not showing ‘interior-fluid’ in 3D geometry

Samia_Sadaf · October 31, 2024, 06:14

Hi Fluent Experts,

I have to creat 'report definitions' in 'interior fluid zone' but it is not appearing there.However,it is present there in boundary conditions.

My geometery is 3D channel and using 2022R2 version

Please guide

Thank you*

xisluke · November 12, 2024, 06:20

Quote:

Originally Posted by Samia_Sadaf

Hi Fluent Experts,

I have to creat 'report definitions' in 'interior fluid zone' but it is not appearing there.However,it is present there in boundary conditions.

My geometery is 3D channel and using 2022R2 version

Please guide

Thank you*

What do you need to plot?

Samia_Sadaf · November 17, 2024, 10:55

pressure, velocity, temperature etc

xisluke · November 17, 2024, 11:01

Ok, but what type of value do you need? Average, max, min etc.. For a cell zone, you can for sure proceed with a volume integral.

Samia_Sadaf · November 17, 2024, 11:06

Area weighted Average Values

xisluke · November 17, 2024, 11:31

Maybe I do not get it, but what is the point to go for an area-weighted value within a cell zone? That type of average is suited for a surface, not for a cell zone.

Samia_Sadaf · November 17, 2024, 11:40

Right right..I got the point above.. thanks for help

October 31, 2024, 06:14	Fluent setup not showing ‘interior-fluid’ in 3D geometry	#1
Samia_Sadaf New Member Samia Sadaf Join Date: Feb 2024 Posts: 11 Rep Power: 2	Hi Fluent Experts, I have to creat 'report definitions' in 'interior fluid zone' but it is not appearing there.However,it is present there in boundary conditions. My geometery is 3D channel and using 2022R2 version Please guide Thank you*

November 17, 2024, 11:01		#4
xisluke Member Luca Join Date: Mar 2021 Location: Italy Posts: 56 Rep Power: 5	Ok, but what type of value do you need? Average, max, min etc.. For a cell zone, you can for sure proceed with a volume integral. Samia_Sadaf likes this.

November 17, 2024, 11:40		#7
Samia_Sadaf New Member Samia Sadaf Join Date: Feb 2024 Posts: 11 Rep Power: 2	Right right..I got the point above.. thanks for help xisluke likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to run fluent from matlab without using aas toolbox?	artemis96	ANSYS	7	May 23, 2022 13:16
Fluent Giving Different Results For Same Analysis Setup	Murwin12	FLUENT	0	March 6, 2019 12:00
Import Deformed Geometry into Fluent	lgamble	FLUENT	1	February 25, 2016 14:59
Running UDF with Supercomputer	roi247	FLUENT	4	October 15, 2015 14:41
2D geometry Gambit 2.0.6 to Fluent 6	Bo Jensen	FLUENT	1	January 17, 2003 10:55

November 17, 2024, 10:55		#3
Samia_Sadaf New Member Samia Sadaf Join Date: Feb 2024 Posts: 11 Rep Power: 2	pressure, velocity, temperature etc

November 17, 2024, 11:06		#5
Samia_Sadaf New Member Samia Sadaf Join Date: Feb 2024 Posts: 11 Rep Power: 2	Area weighted Average Values

November 17, 2024, 11:31		#6
xisluke Member Luca Join Date: Mar 2021 Location: Italy Posts: 56 Rep Power: 5	Maybe I do not get it, but what is the point to go for an area-weighted value within a cell zone? That type of average is suited for a surface, not for a cell zone.