Show Mechanical and Fluent results in CFD-post

ZRS · May 19, 2021, 12:44

Hi guys,
From the manuals I read, it appears one can show transient Mechanical and Fluent results both in CFD-post and create animations with both. However CFD-post 2021-R1 seems rejecting the importing of ansys mechanical (.rst) for ansys 2021 R1 or later.

I cannot drag transient mechanical solution to CFD-post in schemetic either in Workbrench.

Is this a function change or a set up issue?

Do we have any other ways in dealing with Mechanical and Fluent results together?

Thanks.

ashkan.shiravand · June 24, 2022, 05:32

Hi ZRS,

I also have the same problem and I am using Ansys academic 2021R2 and I am not able to transfer the results of mechanical in FSI simulation into CFD-post. Did you find a solution? I appreciate if you could share with me.

destroy · February 26, 2024, 14:52

same problem, did you find the solution?

May 19, 2021, 12:44	Show Mechanical and Fluent results in CFD-post	#1
ZRS New Member OK Join Date: Mar 2021 Posts: 3 Rep Power: 5	Hi guys, From the manuals I read, it appears one can show transient Mechanical and Fluent results both in CFD-post and create animations with both. However CFD-post 2021-R1 seems rejecting the importing of ansys mechanical (.rst) for ansys 2021 R1 or later. I cannot drag transient mechanical solution to CFD-post in schemetic either in Workbrench. Is this a function change or a set up issue? Do we have any other ways in dealing with Mechanical and Fluent results together? Thanks. destroy, J.K. and ashkan.shiravand like this.

June 24, 2022, 05:32	Same problem	#2
ashkan.shiravand New Member Ashkan Join Date: Jun 2022 Posts: 3 Rep Power: 4	Hi ZRS, I also have the same problem and I am using Ansys academic 2021R2 and I am not able to transfer the results of mechanical in FSI simulation into CFD-post. Did you find a solution? I appreciate if you could share with me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
two way FSI error fluent and mechanical	r_abdollahi70	FLUENT	0	January 6, 2018 04:04
Post processing in CFD Post or Fluent.	Blobs	OpenFOAM Post-Processing	2	June 26, 2016 08:23
Cfd to ansys thermal to ansys structural interface	ssixr	ANSYS	17	July 31, 2015 16:18
Exporting fluent melting/solidification model results to ansys mechanical apdl	omair11	ANSYS	3	August 28, 2013 07:22
Look for job, a CFD project using fluent!	roozy	FLUENT	2	April 20, 2010 02:28

February 26, 2024, 14:52		#3
destroy Member Marcin Join Date: Jun 2016 Posts: 98 Rep Power: 10	same problem, did you find the solution?