Home > Forums > Software User Forums > ANSYS > FLUENT

Negative Pressure at flow front with VOF model

Updated Threads

Like Tree

2Likes

2 Post By FPi

Reply

Search this Thread

March 7, 2017, 05:59	Negative Pressure at flow front with VOF model	#1
FPi New Member Florian Piott Join Date: Jan 2017 Posts: 1 Rep Power: 0	Hello, I'm trying to simulate the flow of plastic mold with high viscosity through carbon fibres in a 2D. Therefore I'm using the VOF-Multiphase model.This is similar to the flow around cylinders. The problem is, that after very few time steps there is a very high negative pressure near the flow front. I've tried many different solution methods and boundary conditions but nothing seems to make the solution better. Has anyone ever had the same Problem or any idea how to solve it? Thank you in advance for your help! rarnaunot and Zaki Zam like this.

Reply

Tags

negative pressure, plastic mold, vof

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] mesh airfoil NACA0012	anand_30	OpenFOAM Meshing & Mesh Conversion	13	March 7, 2022 18:22
Review: Reversed flow	CRT	FLUENT	1	May 7, 2018 06:36
Pressure Outlet Targeted Mass Flow Rate	LuckyTran	FLUENT	1	November 23, 2016 11:40
[blockMesh] non-orthogonal faces and incorrect orientation?	nennbs	OpenFOAM Meshing & Mesh Conversion	7	April 17, 2013 06:42
Hydrostatic pressure in 2-phase flow modeling (CFX4.2)	HB &DS	CFX	0	January 9, 2000 14:19

All times are GMT -4. The time now is 13:42.