 |
 |
 |
|
|
|
[Sponsors] | ||||
The fl process could not be started because of UDF |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 2, 2015, 12:10
|
The fl process could not be started because of UDF
|
#1 |
|
Member
majid kamyab
Join Date: Jul 2014
Posts: 32
Rep Power: 12  |
Hello
I am having this problem with ansys fluent 15.07. when I tried to read a case and data which was built and run in fluent 14. the following error happened. Reading "C:\kamyab\from new 32 cpu check\bestfit1-118-754580.dat"... 2 user-defined node memory locations, 252178 nodes, binary. Parallel variables... ================================================== ============================ Node 0: Process 2516: Received signal SIGSEGV. ================================================== ============================ ================================================== ============================ Node 4: Process 3156: Received signal SIGSEGV. ================================================== ============================ ================================================== ============================ Node 1: Process 6020: Received signal SIGSEGV. ================================================== ============================ ================================================== ============================ Node 5: Process 5960: Received signal SIGSEGV. ================================================== ============================ ================================================== ============================ Node 6: Process 2564: Received signal SIGSEGV. ================================================== ============================ ================================================== ============================ Node 2: Process 3152: Received signal SIGSEGV. ================================================== ============================ ================================================== ============================ Node 7: Process 4840: Received signal SIGSEGV. ================================================== ============================ ================================================== ============================ Node 3: Process 5892: Received signal SIGSEGV. ================================================== ============================ unable to read the cmd header on the pmi context, Error = -1 . Error posting readv, An existing connection was forcibly closed by the remote host.(10054) unable to read the cmd header on the pmi context, Error = -1 . Error posting readv, An existing connection was forcibly closed by the remote host.(10054) unable to read the cmd header on the pmi context, Error = -1 . Error posting readv, An existing connection was forcibly closed by the remote host.(10054) unable to read the cmd header on the pmi context, Error = -1 . Error posting readv, An existing connection was forcibly closed by the remote host.(10054) unable to read the cmd header on the pmi context, Error = -1 . Error posting readv, An existing connection was forcibly closed by the remote host.(10054) unable to read the cmd header on the pmi context, Error = -1 . Error posting readv, An existing connection was forcibly closed by the remote host.(10054) unable to read the cmd header on the pmi context, Error = -1 . Error posting readv, An existing connection was forcibly closed by the remote host.(10054) unable to read the cmd header on the pmi context, Error = -1 . Error posting readv, An existing connection was forcibly closed by the remote host.(10054) received suspend command for a pmi context that doesn't exist: unmatched id = 7 received suspend command for a pmi context that doesn't exist: unmatched id = 6 received suspend command for a pmi context that doesn't exist: unmatched id = 5 job aborted: rank: node: exit code[: error message] 0: admin-PC: 2: process 0 exited without calling finalize 1: admin-PC: 2: process 1 exited without calling finalize 2: admin-PC: 2: process 2 exited without calling finalize 3: admin-PC: 2: process 3 exited without calling finalize 4: admin-PC: 2: process 4 exited without calling finalize 5: admin-PC: 2: process 5 exited without calling finalize 6: admin-PC: 2: process 6 exited without calling finalize 7: admin-PC: 2: process 7 exited without calling finalize received suspend command for a pmi context that doesn't exist: unmatched id = 4 received suspend command for a pmi context that doesn't exist: unmatched id = 3 received suspend command for a pmi context that doesn't exist: unmatched id = 1 received suspend command for a pmi context that doesn't exist: unmatched id = 0 The fl process could not be started. the problem is about the UDFs. I have tried these UDFs on fluent 14 and fluent 15.07 in two different occasions. I have run this case and data in fluent 14 for many many iterations. I also run this case in fluent 15.07 from the beginning ( I mean init) so I am sure that UDF are fine. also I am sure that the problem is with the UDFs. because when I diactiveate them there will be no errors. please help 
|
|
|
|
|
|
April 16, 2015, 06:51
|
|
#2 |
|
Member
majid kamyab
Join Date: Jul 2014
Posts: 32
Rep Power: 12 |
its because of double precision. try to run the case with and without double precision.
this took me about 12 days to understand
|
|
|
|
|
|
|
July 1, 2015, 04:36
|
error when itterrate with UDRGM
|
#3 | |
|
New Member
faegheh
Join Date: Jun 2015
Posts: 8
Rep Power: 11 |
Quote:
hi,i worked a lot with fluent 14.5 and 15 but I could not even compile my UDF (actually it is UDRGM) and then shift it to fluent 6.3 and finally could compile my UDRGM with this words: Loading Real-EQUILIBRIUM_GAS Library: Setting material "air" to a real-gas... Loading Real-EQUILIBRIUM_GAS Library: Loading Real-EQUILIBRIUM_GAS Library: Loading Real-EQUILIBRIUM_GAS Library: Loading Real-EQUILIBRIUM_GAS Library: Loading Real-EQUILIBRIUM_GAS Library: Loading Real-EQUILIBRIUM_GAS Library: Loading Real-EQUILIBRIUM_GAS Library: Loading Real-EQUILIBRIUM_GAS Library: then I wanted iterate it but I got some error (with double decision running) and then shift it to single decision and again got error and this the massage: unable to read the cmd header on the pmi context, generic socket failure, error stack: MPIDU_Sock_wait(2533): The specified network name is no longer available. (errno 64). unable to read the cmd header on the pmi context, generic socket failure, error stack: MPIDU_Sock_wait(2533): The specified network name is no longer available. (errno 64). unable to read the cmd header on the pmi context, generic socket failure, error stack: MPIDU_Sock_wait(2533): The specified network name is no longer available. (errno 64). unable to read the cmd header on the pmi context, generic socket failure, error stack: MPIDU_Sock_wait(2533): The specified network name is no longer available. (errno 64). unable to read the cmd header on the pmi context, generic socket failure, error stack: MPIDU_Sock_wait(2533): The specified network name is no longer available. (errno 64). unable to read the cmd header on the pmi context, generic socket failure, error stack: MPIDU_Sock_wait(2533): The specified network name is no longer available. (errno 64). unable to read the cmd header on the pmi context, generic socket failure, error stack: MPIDU_Sock_wait(2533): The specified network name is no longer available. (errno 64). 999999 (..\..\src\mpsystem.c@1123): mpt_read: failed: errno = 10054 999999: mpt_read: error: read failed trying to read 4 bytesunable to read the cmd header on the pmi context, generic socket failure, error stack: MPIDU_Sock_wait(2533): The specified network name is no longer available. (errno 64). : No such file or directory received suspend command for a pmi context that doesn't exist: unmatched id = 7 received suspend command for a pmi context that doesn't exist: unmatched id = 6 received suspend command for a pmi context that doesn't exist: unmatched id = 5 received suspend command for a pmi context that doesn't exist: unmatched id = 3 job aborted: rank: node: exit code[: error message] 0: msc9.aero.edu: -1073741819: process 0 exited without calling finalize 1: msc9.aero.edu: -1073741819: process 1 exited without calling finalize 2: msc9.aero.edu: -1073741819: process 2 exited without calling finalize 3: msc9.aero.edu: -1073741819: process 3 exited without calling finalize 4: msc9.aero.edu: -1073741819: process 4 exited without calling finalize 5: msc9.aero.edu: -1073741819: process 5 exited without calling finalize 6: msc9.aero.edu: -1073741819: process 6 exited without calling finalize 7: msc9.aero.edu: -1073741819: process 7 exited without calling finalize received suspend command for a pmi context that doesn't exist: unmatched id = 2 received suspend command for a pmi context that doesn't exist: unmatched id = 1 received suspend command for a pmi context that doesn't exist: unmatched id = 0 The Parallel FLUENT process could not be started. I don't know that is wrong, could you please help |
||
|
|
|
||
|
July 1, 2015, 05:49
|
|
#4 | |
|
Member
majid kamyab
Join Date: Jul 2014
Posts: 32
Rep Power: 12 |
Quote:
secondly, what was ur problem about compiling in fluent 14.5 and 15? |
||
|
|
|
||
|
July 1, 2015, 06:56
|
|
#5 |
|
New Member
faegheh
Join Date: Jun 2015
Posts: 8
Rep Power: 11 |
[QUOTE=majid_kamyab;552819]first of all you cannot use case and data of a a newer version of fluent for an older one
secondly, what was ur problem about compiling in fluent 14.5 and 15?[/QUOTE thanks for ur replying when i work with fluent 14.5 serial it compile my UDRGM but not load it and these are the massages : Error: C:\PROGRA~1\ANSYSI~1\v145\fluent\fluent14.5.7\win6 4\3ddp\fl1457s.exe received fatal signal (ACCESS_VIOLATION) 1. Note exact events leading to error. 2. Save case/data under new name. 3. Exit program and restart to continue. 4. Report error to your distributor. Error Object: #f but when use parallel version of fluent 14.5 the error for loading is this: Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_host\libudf.dll" opened Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_node\libudf.dll" opened Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_node\libudf.dll" opened Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_node\libudf.dll" opened Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_node\libudf.dll" opened Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_node\libudf.dll" opened Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_node\libudf.dll" opened Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_node\libudf.dll" opened Opening user-defined realgas library "libudf"... Library "libudf\win64\3ddp_node\libudf.dll" opened Setting material "real-gas-fluid" to a real-gas... MPI Application rank 0 exited before MPI_Finalize() with status -1073741819 Message from Cortex process==> Connection with host is broken. It may have crashed. but in fluent 6.3 i compile and load successfully but i can not use my code i mean when i want to start iteration some error appear |
|
|
|
|
|
|
December 15, 2015, 01:15
|
|
#6 | |
|
New Member
abed
Join Date: Dec 2014
Posts: 13
Rep Power: 11 |
[QUOTE=fafa_blues;552839]
Quote:
Have you solved your problem? Actually I have the same problem as yours. If you find the solution, would you please tell me? Thanks. toghaya@gmail.com |
||
|
|
|
||
|
December 15, 2015, 09:42
|
solving the problem
|
#7 | |
|
New Member
faegheh
Join Date: Jun 2015
Posts: 8
Rep Power: 11 |
[QUOTE=toghay;577597]
Quote:
i have found the problem and it was about my code,accually i have changed the code, these kind of errors are because fluent can not access to the right information to give data / or / code ask for wrong type of data, so it can not give any data to solve the equation. i hope it will help |
||
|
|
|
||
|
| Tags |
| fluent 14 to fluent 15., sigsegv, udf |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Dynamic Mesh UDF | Qureshi | FLUENT | 7 | March 23, 2017 08:37 |
| How to simulate the process of water evaporation by UDF? | qiyang860908 | Fluent UDF and Scheme Programming | 10 | January 9, 2015 14:59 |
| UDF error | vagaikwa | Fluent UDF and Scheme Programming | 1 | March 20, 2013 04:11 |
| How to add a UDF to a compiled UDF library | kim | FLUENT | 3 | October 26, 2011 22:38 |
| how to interrupt the process of solver with udf? | endlessfree | Fluent UDF and Scheme Programming | 0 | March 24, 2010 06:48 |
4Likes
Linear Mode
