FSI with remeshing

omidiut · September 12, 2011, 03:11

Hi all
I am trying to simulate Vortex induced vibration of a body with 2 way FSI in ANSYS workbench. can i use remeshing with FSI simulation? how can i do? is it (remeshing) necessary?
when i have to use remeshing in FSI?

Thanks, best regards.

singer1812 · September 12, 2011, 12:01

Remeshing within 2-way FSI is not supported.

brunoc · September 12, 2011, 14:40

Remeshing in moving mesh simulations might be needed if you have strong displacements in your domain. On some cases elements become so distorted that they get inverted. The solver will then exit with a 'negative element' type of error.

Remeshing in 2-way FSI is generally not supported because the solver needs to re-interpolate FEA and CFD meshes, but I believe ANSYS has come up with a beta feature (ie, try on your own risk) for R13 that will allow you to do that. Talk to your ANSYS representative and ask for an example.

Cheers.

javad.emamgholizadeh · September 12, 2011, 18:01

Hi omid.i am simulationing the vortex induced vibrations in the pipe too,can you help me to how can i do it?
plz send your answer in my email(javad.emamgholizadeh@gmail.com).
thanks
best wish

September 12, 2011, 03:11	FSI with remeshing	#1
omidiut Senior Member omid Join Date: Apr 2011 Posts: 105 Rep Power: 15	Hi all I am trying to simulate Vortex induced vibration of a body with 2 way FSI in ANSYS workbench. can i use remeshing with FSI simulation? how can i do? is it (remeshing) necessary? when i have to use remeshing in FSI? Thanks, best regards. javad.emamgholizadeh likes this.

September 12, 2011, 18:01	vortex induced vibrations	#4
javad.emamgholizadeh New Member javad Join Date: Aug 2011 Posts: 2 Rep Power: 0	Hi omid.i am simulationing the vortex induced vibrations in the pipe too,can you help me to how can i do it? plz send your answer in my email(javad.emamgholizadeh@gmail.com). thanks best wish

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remeshing in FSI problem	tctczxh	CFX	12	September 25, 2014 12:11
[Other] Remeshing fails in FSI	pramo4d	ANSYS Meshing & Geometry	0	February 17, 2011 06:14
FSI with time interval remeshing ?	realanony87	CFX	8	September 17, 2010 13:04
BCs in an FSI simulation of a flexble pipe	vivekcfd	OpenFOAM	10	January 8, 2010 05:14
how to extend FSI 2D codes to 3D, need advises	abouziar	Main CFD Forum	1	May 30, 2008 05:08

September 12, 2011, 12:01		#2
singer1812 Senior Member Edmund Singer P.E. Join Date: Aug 2010 Location: Minneapolis, MN Posts: 511 Rep Power: 21	Remeshing within 2-way FSI is not supported.

September 12, 2011, 14:40		#3
brunoc Senior Member Bruno Join Date: Mar 2009 Location: Brazil Posts: 277 Rep Power: 21	Remeshing in moving mesh simulations might be needed if you have strong displacements in your domain. On some cases elements become so distorted that they get inverted. The solver will then exit with a 'negative element' type of error. Remeshing in 2-way FSI is generally not supported because the solver needs to re-interpolate FEA and CFD meshes, but I believe ANSYS has come up with a beta feature (ie, try on your own risk) for R13 that will allow you to do that. Talk to your ANSYS representative and ask for an example. Cheers.