CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

expert parameter

Register Blogs Community New Posts Updated Threads Search

Like Tree2Likes
  • 2 Post By CycLone

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 27, 2008, 05:30
Default expert parameter
  #1
sometimes1900
Guest
 
Posts: n/a
hi all CFX users, iŽd like to use an Expert Parameter to let the back up file not be over wroten. In the user manual the following sentence is wroten: "All of the parameters can be inserted using the command file editor and written back into the definition file before excuting the CFX-Solver".

I can write a txt file in editor and save in format *.txt. Can anyone tell me how can be read the txt file into the *.def file? thanx in advance

Best regard

  Reply With Quote

Old   October 27, 2008, 06:44
Default Re: expert parameter
  #2
Bart
Guest
 
Posts: n/a
cfx5cmds -write -def <deffile> -text <textfile>
  Reply With Quote

Old   October 27, 2008, 06:45
Default Re: expert parameter
  #3
Bart
Guest
 
Posts: n/a
Sorry (gvd html codes)

cfx5cmds -write -def deffile -text textfile
  Reply With Quote

Old   October 27, 2008, 12:41
Default Re: expert parameter
  #4
CycLone
Guest
 
Posts: n/a
You can insert expert parameters directly in CFX-Pre as well. Just right click on the Solver folder and choose "Insert>Expert Parameter". Most of the parameters will appear in the GUI panel that comes up. If you need one that doesn't (i.e. an undocumented one), just add any of the ones shown to create the Expert Parameter object then right click on it and choose "Edit in Command Editor" to insert the parameter manually.

Note that backup files will only be deleted if you specify a regular interval (i.e. every 10 iterations) or an elapsed time interval (i.e. every half hour). If you specify a list of iterations (i.e. 5,10,20,30,...), these will be preserved.

-CycLone
Kummi and aero_head like this.
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Force can not converge colopolo CFX 13 October 4, 2011 23:03
Expert parameter to stop the fluid flow simulation KK CFX 1 February 25, 2008 17:29
MAxium residual...confusion with expert parameter KK CFX 3 February 8, 2008 11:47
asking for a few expert parameter for rotarywing charles CFX 4 November 3, 2006 15:15
Expert Parameter for compressible transient ioannis CFX 0 November 2, 2005 20:28


All times are GMT -4. The time now is 04:27.