|
[Sponsors] |
July 27, 2008, 03:55 |
How can I get the CFX technical report
|
#1 |
Guest
Posts: n/a
|
Hi everyone!
I am looking for the CFX technical report "Development and Application of a Zonal DES Turbulence Model for CFX-5 CFX-Validation Report, CFX-VAL17/0503." How could I get the CFX technical report for can you send me a copy? Thank you very much! turbinesv@gmail.com |
|
July 27, 2008, 08:21 |
Re: How can I get the CFX technical report
|
#2 |
Guest
Posts: n/a
|
http://www.sciencedirect.com/science...5b94d9a7150e5b
doi:10.1016/j.firesaf.2006.08.011 Copyright © 2006 Elsevier Ltd All rights reserved. Numerical simulation of backdraft phenomena Andrej Horvata, and Yehuda Sinai, a, aANSYS Europe Ltd., West Central 127, Milton Park, OX14 4SA Abingdon, Oxfordshire, UK Received 21 March 2005; revised 17 August 2006; accepted 30 August 2006. Available online 4 December 2006. References and further reading may be available for this article. To view references and further reading you must purchase this article. Abstract This paper reports preliminary computational fluid dynamics (CFD) simulations of backdraft observed in an experimental rig at Lund University. The analysis was performed with the CFX software using the Detached Eddy Simulation (DES) turbulence model, a hybrid of Large Eddy Simulation (LES) and RANS, in combination with the EDM combustion model. The DES model uses a RANS formulation in wall proximity to avoid computationally expensive grid resolution that is necessary for realistic LES predictions in wall layers. The preliminary results are qualitatively promising. The simulations began at the instant at which the door opens. A stream of fresh and cold air enters the enclosure as a gravity current. In the rig, ignition was triggered by flammable conditions existing at a wire, which was constantly heated. In the CFD model the ignition time is computed automatically when flammability conditions are reached inside the enclosure, at the wire, as part of the analysis. Subsequently, the fire front is formed. The deflagration expels fuel-rich mixture into environment, and the combustion continues outside the enclosure as a typical 'secondary' event. Considering that backdraft is a very complex phenomenon, the outcome is considered by the authors to be encouraging. Keywords: Backdraft; Fire; Gravity current; CFD; Deflagration; Ignition or in: http://linkinghub.elsevier.com/retri...79711206001147 http://www.informaworld.com/index/788588837.pdf http://epubl.ltu.se/1402-1544/2006/4...DT-0641-SE.pdf |
|
July 30, 2008, 16:23 |
Re: How can I get the CFX technical report
|
#3 |
Guest
Posts: n/a
|
File 0_Numerical_simulation_of_backdraft_phenomena.pdf (508 KB) uploaded!
Thank you for your upload. Remember that only those people are able to access your files knowing the exact link. RapidShare is a file hoster and does not announce your files anywhere. Your Download-Link #1: http://rapidshare.de/files/40121485/...omena.pdf.html |
|
July 31, 2008, 09:37 |
Re: How can I get the CFX technical report
|
#4 |
Guest
Posts: n/a
|
Thank very much, Rogerio .
|
|
July 31, 2008, 10:30 |
Re: How can I get the CFX technical report
|
#5 |
Guest
Posts: n/a
|
You´re welcome!
|
|
September 12, 2015, 11:09 |
CFX technical and validation report
|
#6 |
New Member
Saleh
Join Date: Jul 2012
Posts: 2
Rep Power: 0 |
Hi every one!
I am looking for the CFX technical report "Development and Application of a Zonal DES Turbulence Model for CFX-5 CFX-Validation Report, CFX-VAL17/0503." How could I get the CFX technical report for can you send me a copy? Given link dose not work. fallah.saleh@yahoo.com |
|
September 27, 2018, 21:59 |
|
#7 |
New Member
Lijuan_Chen
Join Date: Aug 2018
Posts: 1
Rep Power: 0 |
Hi everyone!
I am looking for the CFX technical report "Development and Application of a Zonal DES Turbulence Model for CFX-5 CFX-Validation Report, CFX-VAL17/0503." How could I get the CFX technical report ,or if anybody can send me a copy? Thank you very much! chenlj0406@163.com;chenlj0406@gmail.com Last edited by clj; September 27, 2018 at 22:22. Reason: Additional information |
|
September 28, 2018, 02:18 |
|
#8 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,854
Rep Power: 144 |
Contact ANSYS support.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pros and Cons for CFX, CFdesign, COMSOL | Val | Main CFD Forum | 3 | June 10, 2011 03:20 |
ATTENTION! Reliability problems in CFX 5.7 | Joseph | CFX | 14 | April 20, 2010 16:45 |
heat generation in CFX | Ema | CFX | 4 | August 7, 2009 06:39 |
Electronics Enclosure Analysis with CFX | Simulation Engineer | CFX | 1 | April 22, 2009 12:08 |
CFX 4.4 installation problem | Pandu Sattvika | CFX | 1 | December 1, 2001 05:07 |