Solver failure with error

April 4, 2007, 05:30

Dear all,

In my multiphase-multicomponent problem solver fails after 60-70 iterations and gives following messages.

ERROR #001100279 has occurred in subroutine ErrAction. Message : Floating point exception : overflow.

ERROR #001100279 has occurred in subroutine ErrAction. Message: Stopped in routine F_FPX_HANDLER

Before termination values of both additive variables fluctuates over large range. I tried with changing values in initialisation and time step values, but failed.

can anybody help me .

Thanks

sameer

April 4, 2007, 06:00

Dear all,

In my multiphase-multicomponent problem solver fails after 60-70 iterations and gives following messages.

ERROR #001100279 has occurred in subroutine ErrAction. Message : Floating point exception : overflow.

ERROR #001100279 has occurred in subroutine ErrAction. Message: Stopped in routine F_FPX_HANDLER

Before termination values of both Additional variables fluctuates over large range. I tried with changing values in initialisation and time step values, but failed.

can anybody help me .

Thanks

sameer

April 4, 2007, 07:40

Read the multiphase flow best practice guide in the appendix.

jarrai · December 22, 2010, 07:27

Hi Sameer,

I have the same error message:
ERROR #001100279 has occurred in subroutine ErrAction. Message : Floating point exception : overflow.

ERROR #001100279 has occurred in subroutine ErrAction. Message: Stopped in routine F_FPX_HANDLER.

I am working on Single_phase flow,how did you solve your problem?
what does that error massage mean?

ghorrocks · December 22, 2010, 18:20

Floating point exception means your simulation diverged. You need to improve the numerical stability - smaller time steps, better mesh quality or more stable boundary conditions.

April 4, 2007, 05:30	Solver failure with error	#1
Sameer Guest Posts: n/a	Dear all, In my multiphase-multicomponent problem solver fails after 60-70 iterations and gives following messages. ERROR #001100279 has occurred in subroutine ErrAction. Message : Floating point exception : overflow. ERROR #001100279 has occurred in subroutine ErrAction. Message: Stopped in routine F_FPX_HANDLER Before termination values of both additive variables fluctuates over large range. I tried with changing values in initialisation and time step values, but failed. can anybody help me . Thanks sameer

April 4, 2007, 06:00	Re: Solver failure with error	#2
Sameer Guest Posts: n/a	Dear all, In my multiphase-multicomponent problem solver fails after 60-70 iterations and gives following messages. ERROR #001100279 has occurred in subroutine ErrAction. Message : Floating point exception : overflow. ERROR #001100279 has occurred in subroutine ErrAction. Message: Stopped in routine F_FPX_HANDLER Before termination values of both Additional variables fluctuates over large range. I tried with changing values in initialisation and time step values, but failed. can anybody help me . Thanks sameer

April 4, 2007, 07:40	Re: Solver failure with error	#3
Joe Guest Posts: n/a	Read the multiphase flow best practice guide in the appendix.

December 22, 2010, 18:20		#5
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,870 Rep Power: 144	Floating point exception means your simulation diverged. You need to improve the numerical stability - smaller time steps, better mesh quality or more stable boundary conditions. happy likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ParaView for OF-1.6-ext	Chrisi1984	OpenFOAM Installation	0	December 31, 2010 07:42
Accessing phi from a fvPatchField at same patch	johndeas	OpenFOAM	1	September 13, 2010 21:23
Installation OF1.5-dev	ttdtud	OpenFOAM Installation	46	May 5, 2009 03:32
[Netgen] Installation of Netgen in SuSE Linux 92	edvardsenpriv	OpenFOAM Meshing & Mesh Conversion	23	January 16, 2009 07:12
Problem with compile the setParabolicInlet	ivanyao	OpenFOAM Running, Solving & CFD	6	September 5, 2008 21:50

December 22, 2010, 07:27		#4
jarrai New Member jarrai Join Date: Sep 2010 Posts: 7 Rep Power: 16	Hi Sameer, I have the same error message: ERROR #001100279 has occurred in subroutine ErrAction. Message : Floating point exception : overflow. ERROR #001100279 has occurred in subroutine ErrAction. Message: Stopped in routine F_FPX_HANDLER. I am working on Single_phase flow,how did you solve your problem? what does that error massage mean?