How to scale a geometry in CFX-post ?

Hamda · February 19, 2019, 22:17

Hi,
Is there a way to scale a geometry in CFX Post?
I noticed that the dimensions were multiplied by 0.01, and I want to correct it in CFx-post. For example, Maximum of X should be 6.9cm but in CFX-post it is 0.069cm!

Is there a known Way to correct this?

Many thanks in advance.

evcelica · February 20, 2019, 06:42

Don't correct it in post, rerun your simulation with the proper dimensions. Scale it in CFX-Pre with a mesh transformation on the top right of the tree. right click your mesh to display "transform mesh".

February 19, 2019, 22:17	How to scale a geometry in CFX-post ?	#1
Hamda Member Hamda Join Date: Jul 2018 Posts: 80 Rep Power: 8	Hi, Is there a way to scale a geometry in CFX Post? I noticed that the dimensions were multiplied by 0.01, and I want to correct it in CFx-post. For example, Maximum of X should be 6.9cm but in CFX-post it is 0.069cm! Is there a known Way to correct this? Many thanks in advance.

February 20, 2019, 06:42		#2
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,188 Rep Power: 23	Don't correct it in post, rerun your simulation with the proper dimensions. Scale it in CFX-Pre with a mesh transformation on the top right of the tree. right click your mesh to display "transform mesh". Hamda likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Q] Centre line setting in CFX Post	Whitebear	CFX	2	August 1, 2014 04:31
Duplicate faces when importing a 3D Geometry in CFX	JohnPuentes	CFX	0	July 11, 2014 05:26
Extracting a Geometry from CFX Pre	eh14410	ANSYS	0	June 10, 2014 11:17
viewing cfx post while working on cfx solver manager	HMR	CFX	5	March 9, 2011 23:33
ICEM 10 mesh scale foe CFX	Korsh Mik	CFX	2	October 7, 2005 10:07