Solution Initialization using CSV

saddam · May 9, 2018, 01:24

Hello,
I have run the simulation in CFX and got the results, now from the CFX-post I have exported the results in CSV file using File->Export->And full domain. Now with the help of this CSV result file I need to initialize my full domain in CFX-Pre. I am able to apply these value at particular BC but not on full domain. Could you please help me initialize this with the help of CSV file.

Thnaks

Lance · May 9, 2018, 03:19

Do not use csv file to initalize a domain. Use the 'initial values' tab in the solver and specify your results file instead. Or, if you use the command line, the "-initial-file" or "-continue-from-file" options.

Opaque · May 9, 2018, 09:49

If you are initializing all the variables from the .csv file, Lance's suggestions is the appropriate approach. No need for export, import, settting, etc.

If you are modifying the existing results, you can overwrite a solution field in CFD-Post and still use the modified results file for a restart.

If you really need to use the .csv file, you can still use the same syntax as in the BC panel. The software just does not provide the automatic creation of the expressions since initialization via .csv files is not very common (though valid)

May 9, 2018, 01:24	Solution Initialization using CSV	#1
saddam New Member Join Date: Jul 2013 Posts: 4 Rep Power: 13	Hello, I have run the simulation in CFX and got the results, now from the CFX-post I have exported the results in CSV file using File->Export->And full domain. Now with the help of this CSV result file I need to initialize my full domain in CFX-Pre. I am able to apply these value at particular BC but not on full domain. Could you please help me initialize this with the help of CSV file. Thnaks

May 9, 2018, 03:19		#2
Lance Senior Member Lance Join Date: Mar 2009 Posts: 669 Rep Power: 22	Do not use csv file to initalize a domain. Use the 'initial values' tab in the solver and specify your results file instead. Or, if you use the command line, the "-initial-file" or "-continue-from-file" options. Spray_Ansys likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solution Initialization for RDE	Shree_aero	FLUENT	1	May 5, 2018 17:43
Solution Initialization ANSYS Fluent	mawo1	FLUENT	1	April 12, 2016 10:10
UDF - Error while Solution Initialization	QuocHung_Phan	Fluent UDF and Scheme Programming	2	October 11, 2013 04:03
Conduct initialization with a old mesh solution	Jianfeng Zou	FLUENT	1	September 12, 2007 07:06
Wall functions	Abhijit Tilak	Main CFD Forum	6	February 5, 1999 02:16

May 9, 2018, 09:49		#3
Opaque Senior Member Join Date: Jun 2009 Posts: 1,880 Rep Power: 33	If you are initializing all the variables from the .csv file, Lance's suggestions is the appropriate approach. No need for export, import, settting, etc. If you are modifying the existing results, you can overwrite a solution field in CFD-Post and still use the modified results file for a restart. If you really need to use the .csv file, you can still use the same syntax as in the BC panel. The software just does not provide the automatic creation of the expressions since initialization via .csv files is not very common (though valid)