Periodic model for ansys cfx

jayendrajpatel · January 20, 2015, 12:37

hii..

I am currently working on wells turbine project. and new on ANSYS CFX.

I have created a full geometry of wells turbine with guide vanes using CREO 2 for CFX analysis. Geometry having 3 parts inlet section with guide vanes at end(stationary domain), Wells turbine(rotating domain), outlet section (stationary domain) but examiners recommended to work with periodic model.

Main problem is that no. of guide vanes are 13 & wells turbine blades are 8 Now I dont have any exact idea about creating a periodic model with model having.

ghorrocks · January 20, 2015, 17:35

Have you done the tutorial examples? There are examples which show this which come with CFX, and more are available on the ANSYS community page.

jayendrajpatel · January 21, 2015, 07:10

I am using ANSYS at my college so I dont have enough time to go through all tutorials.

Can you suggest some tutorials related to my query?

ghorrocks · January 21, 2015, 17:44

If you do not have time to do the tutorials you are not going to get far.

Have a look at the tutorials in the documentation. The relevant ones are pretty obvious. But the more you do the better you will know CFX so I recommend you do all of them.

January 20, 2015, 12:37	Periodic model for ansys cfx	#1
jayendrajpatel New Member Jayendra Join Date: Jan 2015 Posts: 2 Rep Power: 0	hii.. I am currently working on wells turbine project. and new on ANSYS CFX. I have created a full geometry of wells turbine with guide vanes using CREO 2 for CFX analysis. Geometry having 3 parts inlet section with guide vanes at end(stationary domain), Wells turbine(rotating domain), outlet section (stationary domain) but examiners recommended to work with periodic model. Main problem is that no. of guide vanes are 13 & wells turbine blades are 8 Now I dont have any exact idea about creating a periodic model with model having.

January 21, 2015, 17:44		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	If you do not have time to do the tutorials you are not going to get far. Have a look at the tutorials in the documentation. The relevant ones are pretty obvious. But the more you do the better you will know CFX so I recommend you do all of them. hmasenger likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help to Enable Wall Boiling Model in CFX	cjhaw	CFX	3	September 26, 2013 10:40
CFX Liquid Evaporation Model	Jinx	CFX	3	January 28, 2010 17:31
CAD model sliver faces - CFX Mesh - Parasolid?	Ianto	CFX	3	February 8, 2009 19:32
Musig Model in CFX 5	Hui	CFX	0	September 16, 2005 02:46
Use of 1 equation turbulence model in CFX 4.3	Niels Deen	CFX	0	July 19, 2000 09:50

January 20, 2015, 17:35		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	Have you done the tutorial examples? There are examples which show this which come with CFX, and more are available on the ANSYS community page.

January 21, 2015, 07:10		#3
jayendrajpatel New Member Jayendra Join Date: Jan 2015 Posts: 2 Rep Power: 0	I am using ANSYS at my college so I dont have enough time to go through all tutorials. Can you suggest some tutorials related to my query?