Dynamic mesh test

blasiv · June 4, 2013, 17:31

Hello everyone,

Is it possible to verify if a mesh is working correctly on CFX through some sort of animation, report, or something like that? I would like to see if the displacement condition that i put on it is correct. I'm meshing a compression chamber of a compressor and the piston displacement seems to be wrong.

Thank you very much in advance

ghorrocks · June 5, 2013, 07:05

Send the expression you are using to control the piston motion to a monitor point set to that expression. Then you can monitor it in the solver manager as the simulation progresses.

blasiv · June 5, 2013, 15:22

Thank you very much, ghorrocks. I'll try that

June 4, 2013, 17:31	Dynamic mesh test	#1
blasiv New Member Bernardo Blasi Villari Join Date: Nov 2012 Posts: 2 Rep Power: 0	Hello everyone, Is it possible to verify if a mesh is working correctly on CFX through some sort of animation, report, or something like that? I would like to see if the displacement condition that i put on it is correct. I'm meshing a compression chamber of a compressor and the piston displacement seems to be wrong. Thank you very much in advance

June 5, 2013, 07:05		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,870 Rep Power: 144	Send the expression you are using to control the piston motion to a monitor point set to that expression. Then you can monitor it in the solver manager as the simulation progresses. blasiv likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pls help. mesh collapsed with dynamic mesh.	wlt_1985	FLUENT	2	May 7, 2020 11:42
Gambit problems	Althea	FLUENT	22	January 4, 2017 04:19
Dynamic mesh is not getting updated.	cardio	FLUENT	1	May 20, 2014 09:41
dynamic mesh for drop interface	IndrajitW	FLUENT	0	March 30, 2013 09:03
Dynamic mesh + grid adapt = Crash! (Files included	BillH	FLUENT	4	July 24, 2007 16:31

June 5, 2013, 15:22		#3
blasiv New Member Bernardo Blasi Villari Join Date: Nov 2012 Posts: 2 Rep Power: 0	Thank you very much, ghorrocks. I'll try that