Help regarding velocity streamline plot

hamed.majeed · July 22, 2012, 15:25

Hi,
I want to know what stream line option will give the velocity streamline plot as shown in the figure below. I want exactly the same view, please help.

Thank you

Regards
Hamed

ghorrocks · July 22, 2012, 19:35

That looks like streamlines seeded at the inlet, with one seed per element. The mesh is biased to be finer next to the wall so the streamlines get finer next to the wall. They are coloured by velocity.

Felggv · July 22, 2012, 19:46

It's probably what Glenn said, but you should try to mess with the seeding options, there's a few of them, including a seeding line that could generate an plot similar to the one you want, at least when you look it by its side view.

What probably would change regarding the mesh refinement are the colors. As you may know, a finer mesh should give you more information about any given property hence more colors.

Correct if I'm wrong!

Good luck

hamed.majeed · July 23, 2012, 08:52

Thanks guys I got much better results using the hints you gave me. Here are the results

Please answer the following doubts that I have.
Under sampling what do the options vertex, free edge, and face center mean??
Thank you.

ghorrocks · July 23, 2012, 09:04

It is telling it where to sample the seed points from on your starting face.

Felggv · July 23, 2012, 10:15

I saw you PMed me, did you find the "line" (edge) I told you about?

I confused line with edge i guess! Sorry about that.

I see you've got nice results!

July 22, 2012, 15:25	Help regarding velocity streamline plot	#1
hamed.majeed Senior Member Hamed Abdul Majeed Join Date: May 2012 Location: New Orleans, LA, US Posts: 147 Rep Power: 14	Hi, I want to know what stream line option will give the velocity streamline plot as shown in the figure below. I want exactly the same view, please help. Thank you Regards Hamed

July 22, 2012, 19:35		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	That looks like streamlines seeded at the inlet, with one seed per element. The mesh is biased to be finer next to the wall so the streamlines get finer next to the wall. They are coloured by velocity. hamed.majeed likes this.

July 22, 2012, 19:46		#3
Felggv Member Felipe Gobbi Join Date: Apr 2012 Location: Brazil Posts: 76 Rep Power: 14	It's probably what Glenn said, but you should try to mess with the seeding options, there's a few of them, including a seeding line that could generate an plot similar to the one you want, at least when you look it by its side view. What probably would change regarding the mesh refinement are the colors. As you may know, a finer mesh should give you more information about any given property hence more colors. Correct if I'm wrong! Good luck hamed.majeed likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to plot streamline with panel method?	Fluman	Main CFD Forum	2	June 2, 2014 06:51
plot streamline	taw	Main CFD Forum	6	August 16, 2009 13:26
Streamline superimposed on velocity field	allamarein	FLUENT	0	July 9, 2009 21:51
Is it possible to plot streamline on a user surface	fkzstar	CFX	2	April 8, 2009 06:30
Streamline plot	C.Bhasker	Siemens	12	January 12, 2005 23:44

July 23, 2012, 08:52		#4
hamed.majeed Senior Member Hamed Abdul Majeed Join Date: May 2012 Location: New Orleans, LA, US Posts: 147 Rep Power: 14	Thanks guys I got much better results using the hints you gave me. Here are the results Please answer the following doubts that I have. Under sampling what do the options vertex, free edge, and face center mean?? Thank you.

July 23, 2012, 09:04		#5
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,854 Rep Power: 144	It is telling it where to sample the seed points from on your starting face.

July 23, 2012, 10:15		#6
Felggv Member Felipe Gobbi Join Date: Apr 2012 Location: Brazil Posts: 76 Rep Power: 14	I saw you PMed me, did you find the "line" (edge) I told you about? I confused line with edge i guess! Sorry about that. I see you've got nice results!