[ICEM] Meshing Centrifugal Impeller

Bellmo · May 18, 2011, 07:41

hello,
i started to mesh an impeller of a centrifugal pump and found out that it's quite difficult. i earned some experience with axially turbine blades, but now i am at the end of my knowledge. are there any tutorials for blocking centrifugal machines?

Bellmo · May 25, 2011, 19:51

anyone who can help or maybe give some advices of what i have to take care of?

jeevankumarb · May 26, 2011, 08:50

if you can post some images of the geometry it will be easy to suggest the blocking stratergy.

Mitpostdoc · May 26, 2011, 17:34

I just finished meshing a centrifugal impeller. If you can post some pictures of the geometry I could probably give some advices.

MDSHUJAN · November 13, 2018, 16:12

Quote:

Originally Posted by Mitpostdoc

I just finished meshing a centrifugal impeller. If you can post some pictures of the geometry I could probably give some advices.

Hi. I need help to mesh a centrifugal impeller in ICEM CFD. Please, could you help me?

Gert-Jan · November 14, 2018, 04:08

Help on what? Did you try tutorials?
Please be more specific.

MDSHUJAN · November 25, 2018, 16:13

Quote:

Originally Posted by Gert-Jan

Help on what? Did you try tutorials?
Please be more specific.

Hi. I have done first 4 tutorials. I am struggling to blocking the impeller. Can you send me your blocking file?

My email: md.shujan.ali@gmail.com

Gert-Jan · November 25, 2018, 17:20

Blocking file? I would use unstructeurd for this. No blocking needed.

MDSHUJAN · November 27, 2018, 14:02

Quote:

Originally Posted by Gert-Jan

Blocking file? I would use unstructeurd for this. No blocking needed.

Thanks for your reply. I will try unstrucred mesh. But i was also interested in hexa mesh.

May 18, 2011, 07:41	Meshing Centrifugal Impeller	#1
Bellmo New Member Marcus Join Date: May 2011 Posts: 5 Rep Power: 15	hello, i started to mesh an impeller of a centrifugal pump and found out that it's quite difficult. i earned some experience with axially turbine blades, but now i am at the end of my knowledge. are there any tutorials for blocking centrifugal machines?

May 26, 2011, 17:34		#4
Mitpostdoc New Member Claudio Join Date: Feb 2011 Posts: 20 Rep Power: 15	I just finished meshing a centrifugal impeller. If you can post some pictures of the geometry I could probably give some advices. Elsoghiar likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Hexa meshing of impeller and diffuser assembly	Nitin Dewangan	ANSYS Meshing & Geometry	14	September 13, 2016 10:41
[ICEM] Meshing a centrifugal compressor impeller	Mitpostdoc	ANSYS Meshing & Geometry	8	February 25, 2011 11:51
[GAMBIT] influence between angle in impeller blade and centrifugal pump performance	barak182	ANSYS Meshing & Geometry	2	August 18, 2010 04:07
meshing blade centrifugal pump	mino	CFX	5	December 2, 2006 01:54
Centrifugal impeller modelling	Rik	FLUENT	1	October 27, 2005 07:43

May 25, 2011, 19:51		#2
Bellmo New Member Marcus Join Date: May 2011 Posts: 5 Rep Power: 15	anyone who can help or maybe give some advices of what i have to take care of?

May 26, 2011, 08:50		#3
jeevankumarb Member jeevan kumar Join Date: Mar 2009 Posts: 88 Rep Power: 17	if you can post some images of the geometry it will be easy to suggest the blocking stratergy.

November 14, 2018, 04:08		#6
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,913 Rep Power: 28	Help on what? Did you try tutorials? Please be more specific.

November 25, 2018, 17:20		#8
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,913 Rep Power: 28	Blocking file? I would use unstructeurd for this. No blocking needed.