[ANSYS Meshing] Help with meshing a complex geometry

amsys · April 7, 2020, 07:13

Hi all,

I need to mesh the attached geometry (please see below link to the STL file) as it forms part of a structural analysis I am carrying out. Any suggestions on how to do this as it is a complex geometry? I have cleaned it as much as I can using meshlab tools but when I try and mesh the geometry using ANSYS meshing it fails to do so.

Thanks

https://drive.google.com/file/d/1joH...ew?usp=sharing

REMAIN_VOL.png

Gert-Jan · April 7, 2020, 13:30

You need to close it completely. Then I would mesh it in ICEM. This is very forgiven for sloppy CAD.

mb.pejvak · April 8, 2020, 03:45

I recommend to use gmsh. It is license free software, and you can import stl in your mesh. It's basically for FEM, which unstructured grid widely used, but you can generate structured grid and use it in CFD as well. There is bunch of video on youtube help you to do what you want, as well as the user manual in its website.
I hope it would help you
Due to the problem of the website, I could not reply you message.

April 7, 2020, 07:13	Help with meshing a complex geometry	#1
amsys Member HS Join Date: Sep 2015 Posts: 30 Rep Power: 11	Hi all, I need to mesh the attached geometry (please see below link to the STL file) as it forms part of a structural analysis I am carrying out. Any suggestions on how to do this as it is a complex geometry? I have cleaned it as much as I can using meshlab tools but when I try and mesh the geometry using ANSYS meshing it fails to do so. Thanks https://drive.google.com/file/d/1joH...ew?usp=sharing REMAIN_VOL.png

April 7, 2020, 13:30		#2
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,928 Rep Power: 28	You need to close it completely. Then I would mesh it in ICEM. This is very forgiven for sloppy CAD. Far likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Volume Meshing Problem; YOUR GEOMETRY HAS A HOLE	mariachi	ANSYS Meshing & Geometry	5	May 30, 2018 03:52
[ANSYS Meshing] Meshing complex geometry	cfdhydraulic	ANSYS Meshing & Geometry	15	May 4, 2017 11:09
Offer - Meshing complex Geometry using ICEM CFD	Nicooo	CFD Freelancers	3	December 29, 2016 08:49
Meshing Help for turbulent flow of a complex 3d geometry!!!	aabir	ANSYS Meshing & Geometry	6	June 14, 2016 20:46
Simulation of Flow through Complex 3D Geometry	EmersonKB	CFX	5	July 2, 2009 09:17

April 8, 2020, 03:45		#3
mb.pejvak Senior Member Mehdi Babamehdi Join Date: Jan 2011 Posts: 158 Rep Power: 15	I recommend to use gmsh. It is license free software, and you can import stl in your mesh. It's basically for FEM, which unstructured grid widely used, but you can generate structured grid and use it in CFD as well. There is bunch of video on youtube help you to do what you want, as well as the user manual in its website. I hope it would help you Due to the problem of the website, I could not reply you message.